Set of Six Bentwood Dining Chairs by Norman Cherner
View Similar Items
Set of Six Bentwood Dining Chairs by Norman Cherner
About the Item
- Creator:Norman Cherner (Designer),Plycraft (Manufacturer)
- Dimensions:Height: 31 in (78.74 cm)Width: 17 in (43.18 cm)Depth: 21 in (53.34 cm)Seat Height: 18 in (45.72 cm)
- Sold As:Set of 6
- Style:Mid-Century Modern (Of the Period)
- Materials and Techniques:
- Place of Origin:
- Period:
- Date of Manufacture:Circa 1958
- Condition:Wear consistent with age and use. Very good all original condition.
- Seller Location:Costa Mesa, CA
- Reference Number:1stDibs: LU92201115260
Norman Cherner
Norman Cherner was an influential designer who explored postwar technological innovations and how to incorporate them into furniture production and architecture. And while its history is complicated, his Cherner chair is one of the most successful examples of mid-century modern molded plywood seating.
Born in New York City, Cherner was an architect and a prolific designer who taught at Columbia University’s Teachers College. An enthusiast of the Bauhaus, he gave lectures in the late 1940s on the principles of the legendary German design school at the Museum of Modern Art.
Cherner was fascinated with the concept of cost-efficient design, and this extended into his pioneering ideas for prefabricated housing. His philosophy was that a modular home should be a complete design concept that included economical furniture and lighting. He published several DIY books, such as How to Build a House for $6,000. Cherner caught the interest of a housing cooperative in upstate New York and was contracted to design and oversee the construction of prefabricated housing in the town of Ramapo. The U.S. Department of Housing assembled a pre-built Cherner home for exhibition in Vienna.
But he is best known for his chair.
In the 1950s, one of George Nelson’s designers, John F. Pile, created the Pretzel chair. It had structural problems and proved too costly to make at Herman Miller, where Nelson was director of design. Production was subcontracted to Massachusetts company Plycraft, but the agreement didn’t last long owing to a dispute between the furniture manufacturers. Based on a recommendation from Nelson, Plycraft sought out Cherner to redesign the chair so that it would be durable and affordable to produce.
Cherner submitted his redesign only to be told that Plycraft had shelved the project. However, Plycraft secretly began producing what would become the Cherner chair under a different name — and Cherner later stumbled across his seat in New York. Cherner sued Plycraft and won. The chair became instantly popular after being featured in a Norman Rockwell illustration for a Saturday Evening Post cover in September of 1961.
Other noteworthy Cherner designs include his Konwiser furniture line, Multiflex storage units and tube lighting. The Museum of Modern Art praised his Konwiser collection as “some of the most progressive furniture designs available to the American public.”
In 1972, Plycraft discontinued production of his chair, and Cherner died in 1987. In 1999, his two sons founded the Cherner Chair Company and began making furniture based on their father's original designs for armchairs, chairs — including the Cherner chair — tables and credenzas.
Find vintage Norman Cherner furniture on 1stDibs today.
Plycraft
While the history of Plycraft is marred by scandal and lawsuits, the American furniture manufacturer produced charming lounge chairs and other seating during the mid-century modern era that are sought after by collectors today.
Paul Goldman founded Plycraft in Lawrence, Massachusetts, in 1953 — he had secured military contracts for the manufacturing of bentwood products during World War II and was able to move into the commercial market thereafter. While Plycraft counted fiberglass boats among its early offerings, its primary focus switched to furniture when what we now call mid-century modernism hit its stride and more designers began to explore the possibilities of bentwood furniture thanks to the revolutionary work of Alvar Aalto and Michael Thonet. Goldman was Plycraft’s principal designer, but George Mulhauser and Norman Cherner were also enlisted to create furniture for the brand.
In 1952, a designer named John F. Pile, who was working in the studio of Herman Miller design director George Nelson, conceived what he called the Pretzel chair in walnut and birch. Pile’s seat, which was inspired by European modernist design, proved too costly to manufacture and it had structural problems. So the illustrious Michigan furniture maker subcontracted Plycraft to produce the Pretzel chair — an agreement that was short-lived owing to a dispute between Plycraft and Herman Miller.
Goldman subsequently tapped Norman Cherner — an innovative architect, designer and professor at Columbia University who was recommended by Nelson — to create an iteration of the Pretzel chair that would be stronger and cost-efficient to manufacture.
Cherner submitted a comfortable, curvaceous update to the Pretzel chair in molded plywood but was told by Plycraft that the project was being scrapped and his drawings shelved. Months later, Cherner was shocked to stumble upon his redesigned chair in a furniture showroom in New York under the Plycraft name. Cherner sued Plycraft and won — the Cherner chair later appeared in a Norman Rockwell painting on the cover of The Saturday Evening Post.
In the late 1950s, designer George Mulhauser created the Mr. Chair for Plycraft, an adjustable, tilting, swivel armchair with a matching ottoman. Mulhauser was also a designer in George Nelson’s studio and is credited with having conceived the iconic Coconut lounge chair for Herman Miller. With its tufted leather seat and shell crafted from a single sheet of plywood, the Mr. Chair lounge — part of a line of seating for which Mulhauser was commissioned — bears a resemblance to the now-legendary Eames lounge chair, which was designed by Ray and Charles Eames for Herman Miller. Mulhauser’s chair was very successful for Plycraft. A model was even spotted on an episode of Star Trek.
- Edward Wormley 5499 Lounge Chairs for Dunbar, United States, c.1960By Edward Wormley, Dunbar FurnitureLocated in Costa Mesa, CAEdward Wormley 5499 Lounge Chairs for Dunbar, United States, c.1960. This pair has been expertly restored in New Old Stock Orinoka Mills Fabric originally specified by Dunbar. Each...Category
20th Century American Mid-Century Modern Lounge Chairs
MaterialsBrass
- Lou Hodges Oak & Leather Lounge Chairs for California Design Group, 1970'sBy Lou HodgesLocated in Costa Mesa, CALou Hodges Oak & Green Leather Lounge Chairs for California Design Group, 1970's. This pair has been expertly restored.Category
20th Century American Mid-Century Modern Lounge Chairs
MaterialsLeather, Oak
- Hans Wegner AP-19 Papa Bear Chair in for A.P. Stolen, Denmark, circa 1952By Hans J. Wegner, A.P. StolenLocated in Costa Mesa, CAHans Wegner AP-19 papa bear chair for A.P. Stolen, Denmark, circa 1952. This piece has been expertly restored in Kravet Couture tan & gray wool upholstery. A.P. Stolen Makers stamp t...Category
20th Century Danish Mid-Century Modern Lounge Chairs
MaterialsFabric, Wool, Teak
- Richard Barr Sculptural Table Lamp for the STUDIO Collection by Laurel, c.1965By Richard Barr, Laurel Lamp Company, Harry BalmerLocated in Costa Mesa, CARichard Barr Sculptural Table Lamp for the STUDIO Collection by Laurel, United States, c.1965. Beautiful torch cut and welded brutalist form. Measures: - 13" Deep - 14" Wide -...Category
20th Century American Mid-Century Modern Table Lamps
MaterialsBronze, Steel, Copper
- 'Disneyland Destruction' by Jeff GilleteBy Jeff GilleteLocated in Costa Mesa, CA'Disneyland Destruction' by Jeff Gillete circa 2015. Acrylic and collage on canvas.Category
21st Century and Contemporary American Modern Paintings
MaterialsCanvas, Acrylic, Wood
- Erwine & Estelle Laverne Leather & Steel Bench, United States, c.1955By Laverne Originals, Erwine & Estelle LaverneLocated in Costa Mesa, CAErwine & Estelle Laverne Patinated Leather & Steel Bench, United States, c.1955. Beautiful Original Patina.Category
20th Century American Mid-Century Modern Benches
MaterialsSteel
- Rare Set of Six (6) Bentwood Dining w/ Metal Bases Chairs by Norman ChernerBy Norman Cherner, PlycraftLocated in Deland, FLAs rare as they are visually stunning this extraordinary set of chairs, first designed by the iconic Norman Cherner in 1958, has recently undergone a comprehensive and transformative restoration offering a modern twist to the classic design. Considered a pioneer in molded plywood, Norman Cherner used this method to create a line of seating for Plycraft that led to his famous "Cherner Chair." This model chair is found in design collections throughout the world, including the Vitra Design Museum and the Cherner Chair is still regarded as one of the most dramatic designs utilizing the technology of molding plywood. The Cherner side chair utilizes a molded plywood seat with a unique construction of laminated walnut plywood in graduated thickness. The seats and backs are designed using a single shell connected by a slim and sturdy neck upholstered in new black vinyl nearly identical to the original material all set atop a set of slender, powder-coated metal legs. Stamped "October 31st, 1963" and retaining the original Plycraft tags these one of a kind dining chairs...Category
Vintage 1960s American Mid-Century Modern Dining Room Chairs
MaterialsWalnut
- Set of Norman Cherner Pretzel Dining Chairs, Made by Plycraft, USA, 1960sBy Plycraft, Norman ChernerLocated in London, GBA set of four original Norman Cherner pretzel dining chairs, made by Plycraft, USA, in the 1960s. Bentwood frames. Priced for the s...Category
Mid-20th Century American Mid-Century Modern Dining Room Chairs
MaterialsWood
- Set of 5 Norman Cherner For Plycraft Steam Bent PlywoodBy Plycraft, Norman ChernerLocated in New York, NYSET of 5 American Mid-Century dining chairs with beige painted steam bent plywood frames and orange vinyl upholstered backs and seats. (NORMAN CHERNER FOR P...Category
20th Century American Mid-Century Modern Dining Room Chairs
MaterialsUpholstery, Wood
$22,500 / set - Pair of Norman Cherner Side ChairsBy Norman ChernerLocated in Berlin, BerlinPair of side chairs designed by Norman Cherner. U.S.A., Cherner, 1958. A pair of recent production side chairs in classic walnut laminate on moulded plywood...Category
Early 2000s American Mid-Century Modern Chairs
MaterialsWalnut
$1,922 / set - Set of 6 Norman Cherner Dining Chairs, Made by Plycraft, USA, 1963. 2 Arm ChairsBy Norman Cherner, PlycraftLocated in Buffalo, NYA set of six original Norman Cherner dining chairs, made by Plycraft, USA in the 1960s. Bentwood frames, original patent leatherl seats / backs Plycraft labels to the undersides. Th...Category
Vintage 1960s American Mid-Century Modern Dining Room Chairs
MaterialsPatent Leather, Walnut, Plywood
- Norman Cherner Dining Chairs, Set of EightBy Norman ChernerLocated in Atlanta, GASet of eight sculptural dining chairs, designed by Norman Cherner for Plycraft, American, circa 1950s. They have all been refinished and reupholstered in black vinyl. They measure: 3...Category
Vintage 1950s American Mid-Century Modern Dining Room Chairs
MaterialsUpholstery, Wood
$9,500 / set