Side Chairs

The Panton chair is an important icon of modern design and has a fascinating history as Verner Panton experimented with a variety of materials to best realize the design. The most co...

Mid-Century Modern Harry Bertoia (American, 1915 - 1978) Diamond Chair for Knoll (designed 1952) in white with black base and one seat cushion (black). 30" H x 34" W x 25" D; seat he...

Originally designed by Harry Bertoia in 1952 his namesake collection has remained in production with Knoll ever since, with the side chair becoming one of the most recognisable furni...

Set of four molded shell side chairs designed by Harry Bertoia and manufactured by Knoll. Originally debuted in 1960, this very early set is from 1963 and...

Timeless cantilevered side chairs designed by Verner Panton in 1959. High-quality design made of fiberglass. Unique, retouched condition. Our pair of Panton cantilevered chairs are a stunning golden yellow, original color was blue, see detailed photographs. We have paired them with a stylish Postmodern Circular James Turco Designed Milano Memphis painted and lacquered side table, sold separately. This Pair of Verner Panton Cantilevered Chairs Quality Features: Accomplished design: perfect proportions and visible attention to detail high-quality workmanship using high quality materials. Made in Denmark, Bears the makers mark. Design: Verner Panton, manufacturer: Vitra / Herman Miller Collection Measures: 24 3/4" Deep x 19 1/2" Wide x 32 1/4" High About the Designer and Chair Model: From the early 1950s, Panton had dreamt of making a stackable, cantilevered chair all in one piece. In 1956, he designed the S chair which can be considered a forerunner of the Panton chair. He saw it as an item of furniture in which the back, seat and legs were made of the same material and in one continuous piece. It was first produced in 1965. Panton made a series of sketches and design drawings for the Panton chair in the 1950s. In 1960, he created his first model, a plaster-cast, in collaboration with Dansk Akrylteknik. In the mid-1960s, he met Willi Fehlbaum, who, unlike many other producers, was fascinated with the drawings of his legless chair in plastic rather than wood, the favoured material of the times. Working closely with Fehlbaum, Panton produced a cold-pressed model using polyester strengthened with fibreglass. For the first time, an entire chair had been designed in one piece, without any legs. It became known as a free-swinger. The first rather heavy model, which required substantial finishing work, was subsequently improved and adapted to industrial production using thermoplastic polystyrene which led to a marked reduction in cost. In 1968, Fehlbaum, from Vitra, initiated serial production of the final version which was sold by the Herman Miller Furniture Company. It was varnished in seven colors. In 1979, however, production was halted as it became apparent that the material polystyrene was not sufficiently durable. Four years later, the model was again produced as the Panton chair Classic, this time in the rather more expensive material. Finally, in 1999, Vitra used...

Harry Bertoia for Knoll Black Side Chair No label Black Metal with original vinyl cushion. Visible use and wear. 30 h x 20.75 w x 22.75 d Seat 17.25 Unrestored preowned vintage cond...

A stunning pair or duo swiveling side chairs model Cone designed by Verner Panton 1958, Denmark. This pair of cone side chairs is newly covered with pastel blue velvet fabric and so ...

Listed for sale is an original 1-2-3 dining / side chair, designed by Verner Panton and produced by Fritz Hansen. This is a classic example of Panton's work. Condition overall is ver...

This is a vintage Verner Panton Cone Chair in original green upholstery. The cone chair was originally designed for a restaurant in Denmark, though the novelty of the design has made...

Listed for sale is an original pair of cone chairs, designed by Verner Panton and produced by Plus-Linje. Whereas the current variations and now produced by Vitra, this early example...

White Panton chair by Verner Panton for Vitra with Side Stool Captivated by the potential of plastic, Danish designer Verner Panton created the f...

Iconic midcentury Harry Bertoia black wire mesh side chairs for Knoll International, children's Size, circa 1970. Hans and Florence never insisted that Harry Bertoia design furnit...

Verner Panton "Wire Cone" chair designed in 1958 and produced by Plus-Linje. I have three of these chairs.

La Chaise Wire, conçue par Harry Bertoia pour Knoll, est une œuvre emblématique du design moderne. Réalisée en 1952, cette pièce innovante est composée d'une structure en maille de fils d'acier supportée par de fins pieds métalliques. La fabrication manuelle originale impliquait que chaque fil était soigneusement cintré à la main avant d'être soudé et chromé, mettant en lumière l'approche artisanale de Bertoia dans le design. Harry Bertoia, né en Italie, s'est installé et a étudié l'art et le design aux États-Unis. Après avoir travaillé sur les célèbres chaises Eames, il a créé pour Knoll une collection de sièges en fils d'acier tressé dont la chaise Diamant est l'une des plus reconnues. Les réalisations de Bertoia, notamment la "Diamond chair", la "Bird chair" et la "Barstool chair...

Set of matching Bertoia side, or dining, chairs in chrome with original white pad seat covers. This nice set is in very fine, original, clean and ready to use condition, the only cav...

Danish Modern cone chair designed by revered mod Danish designer Verner Panton. This is a second generation produced by Frem Rojle. Currently upholstered in Kvadrat Tonus. Chrome swi...

This pair of Bertoia side chair is composed of delicate steel rods that have been precisely interwoven and welded to create airy, sculptural seats. Despite their delicate filigreed a...

Timeless and fabulous design by Harry Bertoia for Knoll International. Set of 3 classic beauties with full leather pads for seats and backs. All labeled and in very good condition wi...

The white wire Bertoia side chair is one of the greatest classic mid-century modern chairs around. And this set of two has royal blue seat pads to boot! However, if you don’t like th...

A collaboration between supreme x Vitra Panton for Supreme's Spring Season 21' of the iconic "S Chair" designed by famed Danish designer Verner Panton which dates back to 1959 when i...

An early 1960s "421" Diamond chair by Harry Bertoia for Knoll International. Two are available. Harry Bertoia's striking 421 chair is welded from steel rods and coated in Rilsan p...

Wonderful set of child sized side chairs designed by Harry Bertoia for Knoll. Set was painted light blue at one point and have a wonderful patina. Pictured with Herman Miller fiberglass armchair...

S Chair Vintage modern at its finest with iconic S chair designed by Verner Panton for Herman Miller. Designed in 1959. Production 1960s. Unmarked. Note fiberglass exposed. Vintage w...

Verner Panton for Vitra Glow Panton chair, Luminescent, white, limited edition, on occasion of 50th anniversary. 1000 luminescent produced. After several years of joint development by Verner Panton and Vitra, the Panton chair was finally ready for production in 1967 – as the first all-plastic cantilever chair to be manufactured in one piece. Created with a revolutionary production technique, the chair’s unique sculptural design was presented to the public for the first time at the imm Furniture Fair in Cologne in 1968. It rapidly came to symbolise an entire era. In 2018, 50 years after its launch, Vitra is issuing two limited editions of this iconic classic: Panton Chrome and Panton Glow. Vitra limited production of the “Glow” to 333 chairs which were sold in June 2018, the 50th anniversary of the first presentation of the chair to the public. Verner Panton showed an ardent interest in innovative technologies, techniques and materials over the course of his lifetime. He worked with lighting, colour and luminous elements in many of his futuristic interiors. For his legendary 1970 installation ‘Visiona 2...

Vintage Verner Panton 1-2-3 system chair for Fritz Hansen in black. Item includes designer/ manufacturer stamp to base, vinyl upholstery, swivel base, ver...

This item is part of the private collection of Casey Godrie and is situated in his private house. Ask him for competitive shipping quotes. His incredible Dune Villa, Amsterdam Beach...

Vintage Verner Panton 1-2-3 System chair for Fritz Hansen in Gold. Item includes designer/ manufacturer stamp to base, vinyl upholstery, swivel base, very...

This item is part of the private collection of Casey Godrie and is situated in his private house. Ask him for competitive shipping quotes. His incredible Dune Villa, Amsterdam Beach...

This item is part of the private collection of Casey Godrie and is situated in his private house. Ask him for competitive shipping quotes. His incredible Dune Villa, Amsterdam Beach,check last five pictures, find more details on his family name plus eu, is for sale soon too. :-) From the early 1950s, Panton had dreamt of making a stackable, cantilevered plastic chair all in one piece. In 1956, he designed the S chair which can be considered a forerunner of the Panton chair. He saw it as an item of furniture in which the back, seat and legs were made of the same material and in one continuous piece. It was first produced in 1965. Panton made a series of sketches and design drawings for the Panton chair in the 1950s. In 1960, he created his first model, a plaster-cast, in collaboration with Dansk Akrylteknik. In the mid-1960s, he met Willi Fehlbaum, who, unlike many other producers, was fascinated with the drawings of his legless chair...

This item is part of the private collection of Casey Godrie and is situated in his private house. Ask him for competitive shipping quotes. His incredible Dune Villa, Amsterdam Beach,...

This item is part of the private collection of Casey Godrie and is situated in his private house. Ask him for competitive shipping quotes. His incredible Dune Villa, Amsterdam Beach,check last five pictures, find more details on his family name plus eu, is for sale soon too. :-) From the early 1950s, Panton had dreamt of making a stackable, cantilevered plastic chair all in one piece. In 1956, he designed the S Chair which can be considered a forerunner of the Panton chair. He saw it as an item of furniture in which the back, seat and legs were made of the same material and in one continuous piece. It was first produced in 1965. Panton made a series of sketches and design drawings for the Panton chair in the 1950s. In 1960, he created his first model, a plaster-cast, in collaboration with Dansk Akrylteknik. In the mid-1960s, he met Willi Fehlbaum, who, unlike many other producers, was fascinated with the drawings of his legless chair...

Please ask Casey Godrie Ibiza/Amsterdam for our competitive shipping quotes. This icon is with armrests, pretty rare, with a swivel base. The chair's fabric is in very good conditio...

Blue Scandinavian Modern cone chair or side chair by Verner Panton 1958 and executed by Gebr. Nehl, Germany. The cone swiveling body was made of steel and is fixed on a chromed stee...

This iconic armchair is rare because of the arms. There are some very small rusty spot on the base. Some little damage in the fabric (see picture #9 and #10). Weight 16 kg. Free sh...

Classic Vintage Modern Industrial HARRY BERTOIA Wire side chair white 1952 Dimensions: 29.5 x 22.25 D x 18 W Amazing original condition, cust...

Verner Panton. S-chair, model 275. Designed 1956, this example manufactured ca. 1965. Manufactured by A. Sommer, Germany. Retailed by Thonet, Frankenberg, Germany. Aniline-dyed beech...