Seating

Herman Miller high-back soft pad office chair in black leather, great condition. Stamped with date of manufactured.

For FULL item description click on More Details below. Shipping Quote Information The shipping quote stated in the listing was from 1st Dibs and they normally set all the costs and ...

These are Eames Aluminum Group Soft Pad Management Chairs, Model EA435, initially designed by Charles and Ray Eames for Herman Miller in 1969. These examples date to the 1990s. Their...

This is an Eames Time Life Executive Desk Chair, model ES107, initially designed in 1961 by Ray and Charles Eames for Herman Miller. This design was born as a bespoke concept for the...

Set of 6 Verner Panton chairs in white lacquered molded ABS. Publisher's imprint under the seat. Herman Miller edition for Fehlbaum 1971 (except one from 1973). Bibliography: Peter...

These vintage mid century modern black Model 3475 Eames Time Life Lobby Chairs designed by Charles & Ray Eames for Herman Miller were produced in the 1980s. This classic office chair...

Stately, minimal but certainly not understated. This 90's produced pair of LCW chairs by Charles and Ray Eames for Herman Miller has been reimaged in matte black; offered for your consideration as a limited custom release from ABT Modern. From the first of the plywood series, the abbreviated Eames LCW Chair was the Lounge Height (L) Side Chair (C) on Wood (W) Base. Designed by Charles Eames and first manufactured by the Evans Molded Plywood Division, the chair has long gained classic status. The techniques used to make these unique chairs had been developed during the war years and was evident in the Eames Splint, made for and utilized by the US Navy. The Eames LCW Plywood Chair...

A rare 1956 first year production of the iconic 670/671 lounge chair with spinning ottoman by Ray and Charles Eames for Herman Miller. The spinning ot...

Extremely rare set of four swag legged dining chairs designed in 1958 by George Nelson for Herman Miller. Only produced in fiberglass for a few years, cream colored fiberglass on a s...

Herman Miller Setu Swivel Side Chair. Circa 21st Century, Pre-owned. Measurements: 35" H x 19" W x 22" D x 19" Seat height.

Designed by Ray Wilkes for Herman Miller and first introduced in 1976, this eye-catching modular sofa made a lasting impression with bold, rounded-edge cushions and steel brackets that join the seat and back to allow for independent flexibility that provides a surprising level of comfort. It is known as the Chiclet sofa...

This is an Eames Aluminum Group Soft Pad Executive Desk Chair, Model EA437, initially designed by Charles and Ray Eames for Herman Miller in 1969. These examples date to circa 2010s....

A Transitional Charles Eames PAW Shell Swivel Chair w Wood Dowel Legs. In beautiful attractive condition. Red Venice Label attached on underside. Production Date was 1954-1955. Imme...

Vintage Time Life Desk Chair ES104 by Charles Eames for Herman Miller. The appears to be a nice early example of the design. Will double check the dimensions of the chair. Wear to t...

Sophisticated, chic, voguish pair of lounge chairs designed by George Nelson for Herman Miller circa 1950s. The chairs feature solid maple frames with thick upholstered seats and bac...

Brian Kane's Swoop Collection for Herman Miller embodies a modern interpretation of midcentury style, particularly showcased through the Swoop Plywood Lounge Chair. Kane meticulously...

Mid-Century Modern George Nelson Sofa with Integrated Side Tables for Herman Miller – This exquisite vintage piece, dating back to the 1950s-1960s, epitomizes the functional elegance...

Slat platform bench designed by George Nelson for Herman Miller, marked underneath.

Fabulous set of 4 beech dining chairs by George Nelson for Herman Miller # 4669 with caned backs and period fabric for seat covers. In excellent vintage condition with minimal wear. ...

c. 1960s. USA. Reupholstered in Kvadrat felt wool. Drafting stool.

We have eleven original 1960s Eames fiberglass shell chairs with original H bases. Narrow mount. Lovely rich brown color. These have their original finish and are gorgeous, gleaming,...

Early ‘RAR’ Rocking Chair, initially designed by Ray and Charles Eames in 1950. This particular chair dates to around 1960s, as determined by the Herman Miller Embossed logo. The des...

Charles and Ray Eames side chair DKX-1 in orange leather for Herman Miller, circa 1960s. The chair is in very good vintage condition, no damage to the leather, very solid chair.

Early pair of Charles Eames fiberglass arm shell chairs "Crimson" orange, Herman Miller. Nice original condition, retains original gel...

This early 1950s Herman Miller production of Charles and Ray Eames's classic bent plywood LCM chair, in oak and chrome, has all the original parts and is in very good vintage condition.

Gorgeous early Eames for Herman Miller fiberglass chair LAX (Low Armchair on X Base) having large shock mounts and flat edge shell. All origina...

Eames Herman Miller EA108 swivel desk chairs, USA 1970s. Two available. Polished aluminium frames, original hopsack upholstery (which is a little tatty but totally useable). Fully st...

Iconic LCM lounge chair designed by Charles and Ray Eames for Herman Miller. Beautifully bent seat and backrest. Chrome base with shock-mounts in exce...

Verner Panton "Panton chair" original edition Herman Miller in enamelled fiberglass circa 1960 wear and minor losses.

Set of 4 classic chairs the "La Fonda" designed by Charles and Ray Eames in 1961 for the La Fonda del Sol restaurant in New York and produced by Herman Miller. All the chairs are ori...

Brian Kane's Swoop Collection for Herman Miller embodies a modern interpretation of midcentury style, particularly showcased through the Swoop Plywood Lounge Chair. Kane meticulously...

c. 1980s. Original green upholstery. We have eight available

Hard-to-find First Generation Eames LKX (Low/Wire/X-base) lounge chairs, only made one year with this configuration; 1951. Made by Charles & Ray Eames for He...

This is an original Eames Lounge Chair and Ottoman, model 670 and 671, designed by Charles and Ray Eames for Herman Miller in 1956. This set dates to 1964, per its label. The shells ...

Awesome vintage Mid-Century Modern pair of DCM chairs by Charles & Ray Eames for Herman Miller with chrome frames & black bentwood back & seats. Beautiful condition, keeping in mind ...

Modular 3-seater sofa designed by George Miller in 1956. The sofa incorporates a system of modules that allows you to choose the seating arrangement, the coffee table and chest of dr...

The DAX chair combines the shell of the 'Eames armchairs' with a classic four-legged base and is thus a realisation of the chair concept created by Charles and Ray Eames in the 1950s. Thanks to its relatively simple appearance, the dax chair is undoubtedly the most versatile of Eames plastic chairs...

This is an Eames Aluminum Group Management Chair, Model EA335, originally designed by Charles and Ray Eames for Herman Miller in 1958. These particular examples were produced in the ...

This is an Eames Aluminum Group Management Desk Chair, model EA335, originally designed by Charles and Ray Eames for Herman Miller in 1958. These particular examples date to 2007. Th...

We are delighted to offer for sale extremely rare and important lightly restored, original, Herman Miller No1 1960's black leather and Rosewood lounge armchair and ottoman This is...

Charles and Ray Eames for Herman Miller DKR wire chairs on Eiffel tower bases. All four chairs have been refinished in a correct tone matte black powder...

This is an original Eames Lounge Chair and Ottoman, models 670 and 671, designed by Charles and Ray Eames for Herman Miller in 1956. This set dates to ca. 1958. The shells on this se...

This is an ES-108 Three-Seat Walnut Sofa, initially designed by Ray and Charles Eames for Herman Miller in 1984. This example dates to the 1990s. Its design consists of a solid alumi...

This is an original Eames Lounge Chair and Ottoman, models 670 and 671, designed by Charles and Ray Eames for Herman Miller in 1956. This set dates to 1962. The shells on this set ar...

These are Eames Aluminum Group Soft Pad Executive Desk Chairs, Model EA437, initially designed by Charles and Ray Eames for Herman Miller in 1969. These pieces are newer examples, da...

1st generation LCW lounge chair designed by Charles and Ray Eames Produced by Evans Plywood Products circa 1948-49 Molded Ash plywood in black finish Remarkable condition with 5-2-5...

Mid-Century Lounge Chair and Ottoman by Charles & Ray Eames for Herman Miller for ICF

A rare birch dining or desk chair by Ernest Farmer of George Nelson and Associates for Herman Miller. Professional reupholstery available at pass-thro...

DCW (Dining Chair Wood) chair created by Charles and Ray Eames around 1945. These are second generation chairs produced by Herman Miller USA between 1950 and 1953 (the production of...

This is a single (multiple chairs are available, though sold individually) Eames Aluminum Group Management Desk Chair, designed by Charles and Ray Eames for Herman Miller in 1958. Th...

"La Fonda" Charles Eames & Alexander Girard by Hermann Miller, circa 1960s. Ivory fiberglass shell seat Aluminium base.

This is an LCW Lounge Chair, originally designed by Charles and Ray Eames in 1948. It is an early Herman Miller example featuring the 5-2-4 screw pattern, dating it to ca. 1953. The ...

We are delighted to offer extremely rare and important pair of fully restored, original, Herman Miller No1 & Herman Miller Hillie circa 1958-1960 black leather and Rosewood lounge armchairs and ottomans These are pretty much the most iconic and well known armchair and ottoman ever made, exhibited countless times, displayed in the V&A, Metropolitan Museum of Art, winners of countless awards these are the simply put the finest suite around They have been on a journey, I’ve had all pieces stripped to the bare shells, the frames have been washed back and traditionally French polished, the leather all restored and hand dyed the original nero black, they are the finest example pair anywhere in the world today One suite has the black Herman Miller No1 label, the other, the earlier redish Herman Miller Hillie label Condition wise, the restoration has been done in such a way to keep all the original charm and patina but make them gallery ready, they will have age and use related patina marks here and there but mostly they are in very fine order Dimensions armchairs Height:- 80.5cm Width:- 85cm Depth:- 86.5cm Seat height:- 41cm Dimensions ottomans Height:- 42cm Width:- 65.5cm Depth:- 53.5cm Please note all measurements are taken at the widest point, MUST READ! The Eames Lounge Chair and ottoman are furnishings made of molded plywood and leather, designed by Charles and Ray Eames for the Herman Miller furniture company. They are officially titled Eames Lounge ( 670 ) and Ottoman ( 671 ) and were released in 1956 after years of development by designers. It was the first chair that the Eameses designed for a high-end market. Examples of these furnishings are part of the permanent collection of New York's Museum of Modern Art. Design Charles and Ray Eames sought to develop furniture that could be mass-produced and affordable, with the exception of the Eames Lounge Chair. This luxury item was inspired by the traditional English club chair. The Eames Lounge Chair is an icon of Modern style design, although when it was first made, Ray Eames remarked in a letter to Charles that the chair looked "comfortable and un-designy". Charles's vision was for a chair with "the warm, receptive look of a well-used first baseman's mitt." The chair is composed of three curved plywood shells covered with veneer: the headrest, the backrest and the seat. The layers are glued together and shaped under heat and pressure. The shells and the seat cushions are essentially of the same shape, and composed of two curved forms interlocking to form a solid mass. The chair back and headrest are identical in proportion, as are the seat and the ottoman. The products have changed in various ways over time. Beginning in 1956 and running through the very early 1990s, the shells were made up of five thin layers of plywood which were covered by a veneer of Brazilian rosewood. The use of Brazilian rosewood was discontinued in the early 1990s, and current production since then consists of seven layers of plywood covered by finishing veneers of cherry, walnut, palisander rosewood (a sustainably grown wood with similar grain patterns to the original Brazilian versions), and other finishes. Small changes include the sets of spacers between the aluminum spines and the wood panels, originally of rubber, later hard plastic washers, and the number of screws securing the armrests, originally three, changed to two in second-series models, while the "domes of silence" (glides/feet) on the chair base originally had thinner screws attaching them to the aluminum base than those on later chairs, and the zipper around the cushions, either brown or black on early models, was later black only. Further, early ottomans had removable rubber slide-on feet with metal glides, and early labels are of oblong foil. History The Eames Lounge Chair first...

This is an Eames Aluminum Group Soft Pad Executive Chair, Model EA437, initially designed by Charles and Ray Eames for Herman Miller in 1968. These examples date to 2002. The listed ...

The design of the Aluminum group chairs came from Girard's lament to Charles Eames that there was no well designed outdoor furniture when he was working with Eero Saarinen on the cre...

Eames executive chair ES-104, also known as the Time-Life chair, an iconic piece of mid-century design by Charles and Ray Eames. This chair was originally crafted for the executive f...

DKR-2 chair by Charles and Ray Eames for Herman Miller, also referred to as the bikini chair features a white Naugahyde seat cushion and seat back resembling a bikini. The chair has ...

This is a ‘DAR’ Armchair, originally designed by Charles and Ray Eames in 1950. This particular chair was produced by Herman Miller in 2016. The listed price includes one DAR cha...