Seating

Herman Miller Setu Swivel Side Chair. Circa 21st Century, Pre-owned. Measurements: 35" H x 19" W x 22" D x 19" Seat height.

This vintage mid century modern green Model 3475 Eames Time Life Lobby Chair designed by Charles & Ray Eames for Herman Miller was manufactured in 1996. This classic office chair fea...

This is an Equa high back executive office chair designed by Bill Stumpf and Don Chadwick first introduced in the 80's. This chair has an original manufacturer's label from the 90's....

Introduced in 1946, the slat platform bench was one of Nelson's first designs for Herman Miller after becoming their design director. Intended to serve as a table, a seat, or a base for case goods, its countless imitations over the years are a testament to its functionality and popularity. Herman Miller produced them in a range of sizes to meet a variety of needs. This exceptional vintage example is model 4693. At 102” in length, it’s the largest size slat bench Herman Miller...

Herman Miller Aeron Adjustable Swivel Office Chair, marked to reverse with label to underside, mesh seat and back and leather covered armrests, atop five casters. 41" H x 27" W x 27"...

1x Eames soft pad office chair model EA435 produced by Herman Miller. The chair/s features a polished aluminium frame and a very soft navy blue leather. The chair was made in the e...

Beautiful custom edition of the iconic Eames lounge chair and ottoman. Rosewood shells and aluminum bases cradle the custom burnt orange leather cushions. New leather very soft and i...

Awesome example of the Charles and Ray Eames LAX molded fiberglass arm shell chair for Herman Miller in one of the original colors, lemon yellow. This is an early chair made by Zenit...

Designers Charles and Ray Eames sought to develop furniture that could be mass-produced and affordable, with the exception of the Eames Lounge Chair. The chair was inspired by the tr...

A beautiful set of 4 early 2000’s DCW for Dining Chairs Wood by Charles and Ray Eames for Herman Miller. The label dates them to the period between 2003-2007 approximately when that ...

A rare 1956 first year production of the iconic 670/671 lounge chair with spinning ottoman by Ray and Charles Eames for Herman Miller. The spinning ot...

This is an Eames Aluminum Group Soft Pad Management Chair, Model EA435, initially designed by Charles and Ray Eames for Herman Miller in 1969. These particular examples date to 1992....

These are Eames Aluminum Group Soft Pad Management Chairs, Model EA435, initially designed by Charles and Ray Eames for Herman Miller in 1969. These examples date to the 1990s. Their...

Set of 3 Vintage Swiveling chairs by Eames for Herman Miller. One black, one gray and one dark yellow.

Charles & Ray Eames, Mid-Century Modern, Eames Lounge Chair, Black Leather, Wood An authentic Herman Miller 670 lounge chair and matching 671 ottoman, designed by Charles Eames (190...

Verner Panton "Panton chair" original edition Herman Miller in enamelled fiberglass circa 1960 wear and minor losses.

Here is a rare opportunity to purchase an incredible vintage in-tact original Herman Miller soft pad Executive Lounge or Office chair ...

Charles Eames for Herman Miller fiberglass DSX shell chair. Circa 1970. Retains all it's plastic glides. Shock mounts are in good condition with no visible drying or cracking. Struct...

This pair of vintage mid century modern green Model 3475 Eames Time Life Lobby Chairs designed by Charles & Ray Eames for Herman Miller were manufactured in 1996. These classic offic...

Set of 4 DCM Eames for Herman Miller ash plywood molded dining chairs. Vintage DCM Eames chairs are in great overall condition. 19.5" x 18" x 30" x16" "The Eames Molded Plywood Dining Chair (1946) began as an experiment in the California apartment of Charles and Ray Eames and quickly became a favorite of artists and designers around the world. The body-friendly molded shapes and springy rubber shock mounts of the original chair bring ergonomic comfort and classic mid-century style to the table today. This plywood dining chair with metal base...

Designed by Ray Wilkes for Herman Miller and first introduced in 1976, this eye-catching modular sofa made a lasting impression with bold, rounded-edge cushions and steel brackets that join the seat and back to allow for independent flexibility that provides a surprising level of comfort. It is known as the Chiclet sofa...

Stunning 3 piece modular sofa designed by Don Chadwick for Herman Miller. Made in the United States in the early 1980s. Original labels underneath each piece. Fantastic condition and over 40 years old...

Modular Sofa by George Nelson with a strong metal structure including chrome-plated feet. Two vintage grey upholstered Seats with buttoned backrests and a square Formica side-table t...

We are delighted to offer for sale extremely rare and important lightly restored, original, Herman Miller No1 1960's black leather and Rosewood lounge armchair and ottoman This is...

Charles Eames DCM dining chair with seat and back of molded walnut veneer, chromed steel. Designed by Charles and Ray Eames in 1946. Produced by Herma...

fully refinished but featuring its’ original leather, signed. This piece has been meticulously restored but does have two filled drill marks, wear on the leather, and a loose zipper ...

Vintage Eames molded fiberglass shell in the fairest color of them all, Seafoam Green. Original top circa late 1950s-early 1960s. On later metal and wood base, in good condition with...

We are delighted to offer extremely rare and important pair of fully restored, original, Herman Miller No1 & Herman Miller Hillie circa 1958-1960 black leather and Rosewood lounge armchairs and ottomans These are pretty much the most iconic and well known armchair and ottoman ever made, exhibited countless times, displayed in the V&A, Metropolitan Museum of Art, winners of countless awards these are the simply put the finest suite around They have been on a journey, I’ve had all pieces stripped to the bare shells, the frames have been washed back and traditionally French polished, the leather all restored and hand dyed the original nero black, they are the finest example pair anywhere in the world today One suite has the black Herman Miller No1 label, the other, the earlier redish Herman Miller Hillie label Condition wise, the restoration has been done in such a way to keep all the original charm and patina but make them gallery ready, they will have age and use related patina marks here and there but mostly they are in very fine order Dimensions armchairs Height:- 80.5cm Width:- 85cm Depth:- 86.5cm Seat height:- 41cm Dimensions ottomans Height:- 42cm Width:- 65.5cm Depth:- 53.5cm Please note all measurements are taken at the widest point, MUST READ! The Eames Lounge Chair and ottoman are furnishings made of molded plywood and leather, designed by Charles and Ray Eames for the Herman Miller furniture company. They are officially titled Eames Lounge ( 670 ) and Ottoman ( 671 ) and were released in 1956 after years of development by designers. It was the first chair that the Eameses designed for a high-end market. Examples of these furnishings are part of the permanent collection of New York's Museum of Modern Art. Design Charles and Ray Eames sought to develop furniture that could be mass-produced and affordable, with the exception of the Eames Lounge Chair. This luxury item was inspired by the traditional English club chair. The Eames Lounge Chair is an icon of Modern style design, although when it was first made, Ray Eames remarked in a letter to Charles that the chair looked "comfortable and un-designy". Charles's vision was for a chair with "the warm, receptive look of a well-used first baseman's mitt." The chair is composed of three curved plywood shells covered with veneer: the headrest, the backrest and the seat. The layers are glued together and shaped under heat and pressure. The shells and the seat cushions are essentially of the same shape, and composed of two curved forms interlocking to form a solid mass. The chair back and headrest are identical in proportion, as are the seat and the ottoman. The products have changed in various ways over time. Beginning in 1956 and running through the very early 1990s, the shells were made up of five thin layers of plywood which were covered by a veneer of Brazilian rosewood. The use of Brazilian rosewood was discontinued in the early 1990s, and current production since then consists of seven layers of plywood covered by finishing veneers of cherry, walnut, palisander rosewood (a sustainably grown wood with similar grain patterns to the original Brazilian versions), and other finishes. Small changes include the sets of spacers between the aluminum spines and the wood panels, originally of rubber, later hard plastic washers, and the number of screws securing the armrests, originally three, changed to two in second-series models, while the "domes of silence" (glides/feet) on the chair base originally had thinner screws attaching them to the aluminum base than those on later chairs, and the zipper around the cushions, either brown or black on early models, was later black only. Further, early ottomans had removable rubber slide-on feet with metal glides, and early labels are of oblong foil. History The Eames Lounge Chair first...

Handsome classic Eames lounge chair and ottoman. Executed in rosewood and black leather. Cast aluminum bases, with adjustable “domes of silence” leveling glides. Extremely comfortabl...

This authentic Eames for Herman Miller Soft Pad Management Height black leather office chair from the Aluminum Group Collection was manufactured in the 2001. This classic mid century...

Charles and Ray Eames DAX swivel padded arm shell chair in two-tone with dark gray exposed fiberglass shell. Rusty orange woven wool fabric cover, black piping, four-star aluminium b...

This is an Eames Aluminum Group Management Desk Chair, designed by Charles and Ray Eames for Herman Miller in 1958. This particular chair was produced in the 2010’s. The design spo...

Handsome example of the iconic Eames DCM. Herman Miller Eames edition, signed and guaranteed authentic. Circa late 1950s/early 1960s production. All screws and glides present. Beauti...

This is an Eames Aluminum Group Management Desk Chair, model EA335, originally designed by Charles and Ray Eames for Herman Miller in 1958. These particular examples date to 2007. Th...

This is an original Eames Lounge Chair and Ottoman, model 670 and 671, designed by Charles and Ray Eames for Herman Miller in 1956. This set dates to 1964, per its label. The shells ...

Awesome vintage Mid-Century Modern original mauve hopsacking & chrome tubular pair of chairs by Peter Protzman for Herman Miller. Beautif...

Designed by Charles and Ray Eames in the late 1950s, this pair of black leather lounge chairs is the pinnacle of the Herman Miller Aluminum Group family of seating. This pair is not ...

Beautiful and iconic design by Charles & Ray Eames for Herman Miller in Rosewood and Black Leather 1981 with the ottoman which has a new leather seat. Classic design which will never...

George Nelson and Associates for Herman Miller "Marshmallow" Sofa, originally designed 1956, this example 2012, eighteen black leather upholstered cushions on a steel and black ename...

This is an original Eames Lounge Chair and Ottoman, models 670 and 671, designed by Charles and Ray Eames for Herman Miller in 1956. This set dates to ca. 1958. The shells on this se...

Mid Century Modern Peter Protzman for Herman Miller High Back Swivel Office Chair on Casters Newly Upholstered with Black Distressed Italian Leather Circa Mid 20th Century Tagged

This is a Two-Seat Sofa / Settee, designed by Charles and Ray Eames in 1978. The design is rather special as it is the last piece of furniture produced by the Eames Office, which com...

Iconic chairs designed by Charles & Ray Eames for Herman Miller. Molded fiberglass shells in the colors: Elephant Hide Grey, Parchment, Lemon Yellow and Greige. Mounted on vintage bl...

This is an original Eames Lounge Chair and Ottoman, models 670 and 671, initially designed by Charles and Ray Eames in 1956. These are exceptional early examples and feature freshly-...

This is an original Eames Lounge Chair and Ottoman, models 670 and 671, designed by Charles and Ray Eames for Herman Miller in 1956. This set dates to 1962. The shells on this set ar...

c. 1980s. Price is for the set. Contact us if you’d like to purchase a single item. Original maroon dotted upholstery

This is an Eames Aluminum Group Management Chair, Model EA335, originally designed by Charles and Ray Eames for Herman Miller in 1958. These particular examples were produced in the ...

Set of ten different color Herman Miller fiberglass dining chairs. Original production, not the new ersatz ones. All in good condition with all screws and feet intact. All signed and...

Iconic Mid-Century Modern Charles and Ray Eames for Herman Miller tandem bench. This modular system features three Eames shell chairs with r...

Introduced in 1946, the slat platform bench was one of Nelson's first designs for Herman Miller after becoming their design director. Intended to serve as a table, a seat, or a base ...

This classic vintage mid century modern Eames Compact Sofa Model S-473 is circa 1970. The sofa has been professionally reupholstered in a gorgeous Herman Miller blue nubby fabric. Th...

Set of 4 vintage white fiberglass Eames chairs by Herman Miller. All original, not a recent edition. Stamped under.

Charles and Ray Eames aluminum group side chair, EA330 office conference chair in dark olive green upholstery, five-star base, adjust t...

Beautiful custom edition of the iconic Eames lounge chair and ottoman. Rosewood shells have been restored and cradle the custom burnt orange leather cushions. New leather very soft a...

This rare lounge chair was designed by Charles & Ray Eames and were produced by Herman Miller in the early 1970s. It is one of the earlier lounge chairs which were produced in Europe...

Designed in the late 1940s by Charles Eames, this chair has cemented itself in Mid-Century Design like very few other pieces. Early models like this are difficult to come by and are very rarely in such good condition, as many have been worked on in some way or another before their value shot up. These chairs feature a super sleek design of steam-bent plywood, an incredibly innovative technique pioneered by Herman Miller in collaboration with the Eames's and manufacturing firm Evans. The large seat and back are mounted to a molded plywood base with rubber shock mounts, another Eames staple. This allows them to have excellent contrast through spacing, which gives them an excellent stance, almost insect-like. Both are early chairs with the correct screw configurations beneath. This pair features all original hardware, finish, and shock mounts. Very few blemishes, and those that exist are minimal, barely visible even in our high-res pictures. At this time, we have two early pairs, as seen in in photos. We also have another single early model, and two extremely rare pre-production chairs with the accompanying molded plywood coffee table...

For your consideration 1970s Herman Miller Eames Red Time Life Executive Office Chair Label present Preowned vintage condition Patina and ru...

This seating group from George Nelson’s "Modular Seating" series for Herman Miller combines timeless design with exceptional functionality. The flexible arrangement of elements allow...