Skip to main content
Want more images or videos?
Request additional images or videos from the seller
1 of 11

Vico Magistretti Set of Two Red Selene Chairs by Artemide 1970s

$873.52per set
£661.71per set
€750per set
CA$1,210.14per set
A$1,357.26per set
CHF 710.77per set
MX$16,491.98per set
NOK 9,025.64per set
SEK 8,556.94per set
DKK 5,710.32per set

About the Item

A set of two Selene stackable chairs in red resin reinforced with fiberglass, designed by Vico Magistretti in 1967 and produced by Artemide Milano in the 1970s. The Selene chair was designed in 1967 by Magistretti to be produced in a plastic material, as he affirmed: "The seat and the back are simple curved surfaces. For me, the legs represented the real image of the piece, with as small a volume as that of any common wooden chair. I solved it by exploiting the molding of a plastic material formed by a simple 3-millimeter-thick sheet with a simple but very resistant "S" cross-section which inter-related the object with ordinary chairs without however the elephant legs so untypical of chairs. It was fun working with the model maker on the wood model." When produced in series, "a unit comes out of the machine every five minutes": Selene is the fruit of a single compression molding process on a pre-impregnated sheet (Ottagono 15 / 1969). Magistretti solves the problem of leg resistance by adopting an "S-shaped" configuration that confers resistance to a sheet only 3 millimeters thick. The formal and structural solution had already been previously adopted for the Chimera lamp (a self-supporting methacrylate sheet) and in developing the legs of the Demetrio table, again in GRP. The Selene chair, an excellent example of discrete elegance and of the essential expressiveness of the use of new technologies, became an international success over the following decades from America to Japan, also in the pastel colors typical of the Post-Modern period.
  • Creator:
    Artemide (Manufacturer),Vico Magistretti (Designer)
  • Design:
  • Dimensions:
    Height: 29.53 in (75 cm)Width: 18.51 in (47 cm)Depth: 19.69 in (50 cm)Seat Height: 17.72 in (45 cm)
  • Sold As:
    Set of 2
  • Style:
    Mid-Century Modern (Of the Period)
  • Materials and Techniques:
  • Place of Origin:
  • Period:
  • Date of Manufacture:
    1970s
  • Condition:
    Wear consistent with age and use.
  • Seller Location:
    Montecatini Terme, IT
  • Reference Number:
    1stDibs: LU5304242323432

More From This Seller

View All
Vico Magistretti Set of Nine Red Selene Chairs by Heller 2002s
By Vico Magistretti, Heller
Located in Montecatini Terme, IT
Set of nine Selene stackable chairs in red polyester reinforced with fiberglass, designed by Vico Magistretti in 1967 and produced by Heller in 2002. The Selene chair was designed in 1967 by Magistretti to be produced in a plastic material, as he affirmed: "The seat and the back are simple curved surfaces. For me, the legs represented the real image of the piece, with as small a volume as that of any common wooden chair. I solved it by exploiting the molding of a plastic material formed by a simple 3-millimeter-thick sheet with a simple but very resistant "S" cross-section which inter-related the object with ordinary chairs without however the elephant legs so untypical of chairs. It was fun working with the model maker on the wood model." When produced in series, "a unit comes out of the machine every five minutes": Selene is the fruit of a single compression molding process on a pre-impregnated sheet (Ottagono 15 / 1969). Magistretti solves the problem of leg resistance by adopting an "S-shaped" configuration that confers resistance to a sheet only 3 millimeters thick. The formal and structural solution had already been previously adopted for the Chimera lamp (a self-supporting methacrylate sheet) and in developing the legs of the Demetrio table...
Category

Early 2000s European Mid-Century Modern Chairs

Materials

Plastic, Rubber

Franco Albini PL19 or Tre Pezzi Armchair in Red Fabric by Poggi 1970s
By Poggi, Franco Albini and Franca Helg
Located in Montecatini Terme, IT
PL19 or Tre Pezzi armchair with frame in black lacquered tubular steel, seat and back in padded red fabric. Designed by Franco Albini and Franca Helg in 1959 for the Nuove terme Lui...
Category

Vintage 1970s Italian Mid-Century Modern Armchairs

Materials

Steel

Augusto Bozzi Set of Two Aster Chairs by Saporiti 1950s
By Augusto Bozzi, Fratelli Saporiti
Located in Montecatini Terme, IT
Set of two Aster chairs designed by Augusto Bozzi in the 1950s and manufactured by Fratelli Saporiti. The main feature of chairs is the iconic and elegant metal structure of the legs...
Category

Vintage 1950s Mid-Century Modern Chairs

Materials

Metal, Brass

Carlo Ratti Set of Six Chairs in Plywood by Industria Legni Curvati Lissone 1950
By Industria Legni Curvati, Carlo Ratti
Located in Montecatini Terme, IT
Set of six dining chairs with backs and seats realized in curved veneered plywood and legs in black lacquered metal, designed by Carlo Ratti and manufactured by Industria Legni Curvati (Lissone, Italy) in the 1950s. In Italy, at the beginning of the XX century, industries of curved solid wood arose under license of Michael Thonet, and through the International Exhibitions the processing of curved wood became more and more widespread. The Expo of the first decade was also attended by the wood manufacturers of Monza, while in 1905 Otto Helzer, in Switzerland, patented wooden structures in curved laminated, whose strength was equivalent to those in steel. The Ratti brothers of Monza took their cue from the solid wood laminate to create furniture that, instead of wooden elements, used sheets of wood. The brothers Ratti, Carlo and Mario, also began to follow the young artistic avant-gardes (cubism, futurism and abstractionism). The mastery of wooden sculpture influenced Carlo in the design and realization of furniture of fine neo-plastic artistic workmanship and decò, receiving honors from the Prince of Piedmont Umberto di Savoia. In 1919, in Milan, the first Lombard Exhibition of Decorative Arts was set up (later to become the Triennale) and the Ratti brothers exhibited their furniture in solid wood but also in curved panel with a new system of curvature, the one in Telo. The canvas system was developed by the Ratti brothers with the help of a friend, Cesare Cantù. They developed an elastomer bag in which the mould was inserted with the panel to be bent and, closing it with clamps, the air inside was removed, thus making the panel adhere to the mould. Carlo and Mario found in the Telo system a means by which they could make objects and furniture in the three spatial directions with large surface curvatures, without limits of thickness and minimum radii of curvature. In 1921 in Stuttgart the first Salone del Mobile was inaugurated and the Fratelli Ratti of Monza made itself known internationally by presenting solid wood furniture and also furniture in load-bearing plywood, flanked by furniture with framed and interchangeable covers. The Expo became meeting places to verify and present the novelties in the furniture and industrialization sector and, with the development of Industrial Design, the first architects joined in the design of the furniture industries. The Ratti Brothers, in the various international and national exhibitions, also presented incredible objects in their realization with the system in Telo. After 1930 Carlo and Mario produced many containers for radio and folding chairs for cinema but in 1939 they divided and in Monza Mario remained who, with his sons Antonio and Angela, formed the Società Compensati Curvi...
Category

Vintage 1950s Italian Mid-Century Modern Chairs

Materials

Metal

Giotto Stoppino Set of Six White Alessia Chairs by Driade 1970s Italy
By Driade, Giotto Stoppino
Located in Montecatini Terme, IT
Set of six Alessia chairs with legs in tubular chromed metal and seats in white ABS, designed by Giotto Stoppino and manufactured by Driade in the 1970s. (Manufacturer's brand visi...
Category

Vintage 1970s Italian Mid-Century Modern Chairs

Materials

Metal

Vittorio Introini Set of Four Longobarda Dining Chairs by Saporiti 1960s Italy
By Saporiti, Vittorio Introini
Located in Montecatini Terme, IT
Set of four Longobarda chairs with chromed metal legs, seat, and back upholstered with blue shade fabric. The Longobarda chair was designed by Vittorio Introini and manufactured by ...
Category

Vintage 1960s Italian Mid-Century Modern Chairs

Materials

Metal

You May Also Like

Italian modern plastic red Chairs Selene by Vico Magistretti for Artemide, 1960s
By Artemide, Vico Magistretti
Located in MIlano, IT
Italian modern plastic red Chairs mod. Selene by Vico Magistretti for Artemide, 1960s Set of 4 iconic chairs mod. Selene in dark red-burgund...
Category

Vintage 1960s Italian Modern Living Room Sets

Materials

Plastic

Set of 4 Selene Dining Chairs by Vico Magistretti for Artemide
By Artemide, Vico Magistretti
Located in München, DE
Stunning Italian plastic chairs from the 1970s. Extremely successful design and an enrichment for every home. The chairs are both comfortable an...
Category

Vintage 1970s Italian Mid-Century Modern Dining Room Chairs

Materials

Plastic

Italian modern red plastic chairs 1050 by Marcello Siard for Longato, 1970s
By Collezioni Longato, Marcello Siard
Located in MIlano, IT
Italian modern red plastic chairs 1050 by Marcello Siard for Longato, 1970s Pair of chairs mod 1050 entirely in bright red plastic. The seat and backrest have a curved and rounded li...
Category

Vintage 1970s Italian Modern Dining Room Chairs

Materials

Plastic

Vico Magistretti for Artemide Pair of Red Vicario Chairs, Italy 1970s
By Vico Magistretti, Artemide
Located in Naples, IT
The Vicario armchair was designed by Vico Magistretti at the end of the 1960s for Artemide. Made of ABS plastic, this chair features flowing shapes and a perfect balance of design, f...
Category

Vintage 1970s European Mid-Century Modern Chairs

Materials

Plastic

Italian Space Age Pair of Red Plastic Chairs by Carlo Bartoli for Kartell, 1970s
By Carlo Bartoli, Kartell
Located in MIlano, IT
Italian Space Age pair of red plastic chairs by Carlo Bartoli for Kartell, 1970s Pair of chairs with rounded shapes, in red plastic with removable l...
Category

Vintage 1970s Italian Space Age Chairs

Materials

Plastic

Space Age Red Plastic Vintage Chair Selene by Vico Magistretti, Italy
By Vico Magistretti
Located in Vienna, AT
Space Age red vintage plastic chair model Selene designed by Vico Magistretti 1968 for Artemide Milano, Italy. The chair shows a very good vintag...
Category

Late 20th Century Italian Space Age Chairs

Materials

Plastic