Skip to main content
Want more images or videos?
Request additional images or videos from the seller
1 of 21

Restored Hans J. Wegner for Andreas Tuck AT-319 Drop-Leaf Rosewood Dining Table

$18,500
£14,074.25
€16,457.11
CA$25,873.07
A$29,065.46
CHF 15,468.31
MX$359,405.59
NOK 188,483.05
SEK 182,236.06
DKK 122,754.67
Shipping
Retrieving quote...
The 1stDibs Promise:
Authenticity Guarantee,
Money-Back Guarantee,
24-Hour Cancellation

About the Item

This incredible table was designed by Danish legend Hans J. Wegner for production by Andreas Tuck Mobelfabrik, who was responsible for many of Wegner's early designs and established the precedent of exceptional build quality we know from Wegner pieces today. There were a few versions of this table, some in other woods, but all of them smaller. We have the largest version of this table ever produced, the AT-319, which extends up to just shy of 10 feet long with both drop-leaf panels attached and deployed. This is also a rosewood model, long held as the most desirable. The quality of this table is among the best from the era. Easily comparable to other exceptional pieces by Wegner, Finn Juhl, and Fritz Hansen. The base is entirely chrome plated steel with precision-manufactured steel bars added for support. The hinges for the drop-leaves are also of steel. Beneath the table, the mechanism for the sliding panels which hold the leaves up is crafted of solid wood and securely mounted the top with tens of screws. The classic attention to detail by Andreas Tuck has resulted in bookmatched rosewood both atop and beneath the table, a measure not taken by other factories for cost-saving. There were absolutely no cost-saving measures for this table's production. This table is in original condition, but will receive a complete restoration upon purchase. This involves a laborious process, including careful hand-sanding and chemical stripping of the top. A new finish is applied with industrial-grade tools, then sealed using a clear lacquer. Finally, it will spend hours in the polishing booth, resulting in an exceptional shine. When complete, this table will look better than it did new. Our in-house professionals have decades of experience working on the most exclusive pieces. In the last few photos are other pieces that we have restored so that you may get a sense of our work. Nanna Ditzel Rosewood Desk This is the polished finish we think will suit the piece best. It allows the rosewood to shine in full glory and creates incredible contrast. Florence Knoll Rosewood Cabinets These, we have refinished in a similar process, but forgoing the polishing in favor of a more satin look. Its subtler look is sophisticated while being less loud than a reflective finish. This can also be achieved if you desire.

More From This Seller

View All
Charles & Ray Eames for Herman Miller Restored Rosewood Conference Dining Table
By Charles and Ray Eames, Herman Miller
Located in Philadelphia, PA
This rare table was designed by Charles and Ray Eames in the early 1960s for Herman Miller, the producer of all Eames designs at the time. It was not widely produced at the time, and...
Category

Vintage 1960s American Mid-Century Modern Dining Room Tables

Materials

Aluminum, Steel

Restored Checkerboard Patchwork Rectangular Table after Milo Baughman with Leaf
By Milo Baughman, Lane Furniture
Located in Philadelphia, PA
Made towards the late 1970s, this table was manufactured to the exacting standards known of Lane furniture in a style similar to the popular Milo Baughman tables. The entire table is...
Category

Vintage 1970s American Mid-Century Modern Dining Room Tables

Materials

Wood, Walnut

Milo Baughman for Directional Dining Table in Walnut, Rosewood, Ash w/ 2 Leaves
By Directional, Johnson Furniture Company, Milo Baughman
Located in Philadelphia, PA
Made in the Unites States in the 1960s, this piece was manufactured by Johnson Furniture Co. and sold by Directional, who consistently sold smash hits from the likes of Paul Evans an...
Category

Vintage 1960s American Mid-Century Modern Dining Room Tables

Materials

Hardwood, Ash, Rosewood, Walnut

Unusual Rastad & Relling for Gustav Model R3 Rosewood Dining Table with 2 Leaves
By Adolf Relling and Rolf Rastad
Located in Philadelphia, PA
Designed and made in Norway, this dining table features a wonderful combination of great Norwegian design and awesome production quality. With frame made of walnut hardwood, it featu...
Category

Vintage 1960s Norwegian Mid-Century Modern Dining Room Tables

Materials

Rosewood, Walnut

Restored Early Eero Saarinen Knoll Tulip Dining Table Walnut Top Iron 54" Round
By Knoll, Eero Saarinen
Located in Philadelphia, PA
Vintage Eero Saarinen 54" Round Tulip, model 174W, dining table was made for distribution by Knoll and was a huge success. A rare walnut top, beautiful with rich warm and grain. The ...
Category

Vintage 1960s American Mid-Century Modern Dining Room Tables

Materials

Enamel, Steel, Iron

Danish Extendable Dining Table in Teak by Niels O. Møller for J.L. Møller
By Neils O. Möller
Located in Philadelphia, PA
Elegant dining table No. 254 designed by Niels O. Møller in the 1950s and manufactured by J.L. Mollers Møbelfabrik in Denmark. This table comes in teak wood and combines minimalist S...
Category

Mid-20th Century European Mid-Century Modern Dining Room Tables

Materials

Teak

You May Also Like

Hans J. Wegner "AT-319" Rosewood & Steel Drop-Leaf Dining Table for Andreas Tuck
By Andreas Tuck, Hans J. Wegner
Located in Los Angeles, CA
Hans J. Wegner "AT-319" rosewood & steel drop-leaf dining table for Andreas Tuck  Dimensions: Dining table: 28in H x 71in - 118in W x 29.25in D 2x extension leaf 23.50in. ________...
Category

Vintage 1950s Danish Mid-Century Modern Dining Room Tables

Materials

Steel

Hans Wegner Dining Table for Andreas Tuck
By Hans J. Wegner, Andreas Tuck Møbelfabrik
Located in San Francisco, CA
Hans Wegner design dining table for Andreas Tuck, Denmark. High qulaity construction and materials executed with an oak base and contrasting teak top and leaves by the cabinetry shop...
Category

Vintage 1950s Danish Scandinavian Modern Dining Room Tables

Materials

Oak, Teak

Hans Wegner AT-314 Drop Leaf Dining Table for Andreas Tuck
By Hans J. Wegner
Located in Dallas, TX
Large Hans Wegner teak AT-314 drop leaf dining table with oak base and brass stretchers.
Category

Vintage 1950s Dining Room Tables

Materials

Oak, Teak

Drop Leaf Dining Table by Hans J. Wegner for Andreas Tuck
By Hans J. Wegner, Andreas Tuck
Located in Sagaponack, NY
A teak-top dining table with two removable drop leaves, on tapered dowel oakwood legs with arched aprons. Full span with leaves measures 70" wide.
Category

Vintage 1950s American Mid-Century Modern Dining Room Tables

Materials

Teak

Hans Wegner "AT-309" Drop-Leaf Dining Table for Andreas Tuck, Denmark 1950s
By Hans J. Wegner
Located in Utrecht, NL
This rare “AT-309” dining table was designed by Hans Wegner in 1955 and its title of ‘iconic’ is well deserved. As it is no longer produced, this model has become a collector’s item ...
Category

Vintage 1950s Danish Mid-Century Modern Dining Room Tables

Materials

Wood

Drop Leaf Dining Table by Hans J. Wegner for Andreas Tuck
Located in Sagaponack, NY
A square teak-top dining table with two drop leaves, on oak tapered dowel legs with arched aprons.
Category

20th Century Danish Dining Room Tables

Materials

Wood