Skip to main content
Want more images or videos?
Request additional images or videos from the seller
1 of 13

C. 1953 Herman Miller Eames Fiberglass Arm Shell MAX Chair with Black X Base

$1,800
£1,361.82
€1,571.76
CA$2,514.10
A$2,795.20
CHF 1,463.12
MX$34,282.18
NOK 18,629.19
SEK 17,588.16
DKK 11,728.96
Shipping
Retrieving quote...
The 1stDibs Promise:
Authenticity Guarantee,
Money-Back Guarantee,
24-Hour Cancellation

About the Item

This is an early 1950s (circa 1953) Charles and Ray Eames for Herman Miller fiberglass MAX arm chair. The piece does not retain its label, but we can accurately date the chair to between approximately 1954 based on the base and corresponding feet. It has its original black X base with the large shock mounts intact. The chair measures 24 inches deep, 24.75 inches wide, and 30 inches tall. Its seat height is 17 inches. The base’s black finish has some patina, and we have intentionally left it in as-found condition. The fiberglass seat has some exposed fibers, and has developed a very attractive patina. Overall, this all-original chair is in very good condition with some wear. Please see photos. Genuinely faulty goods will be replaced or money refunded on a case by case basis, however we must be advised of any faulty goods upon receipt of the item. It is the customer's responsibility to pay for return shipping and ship the item back to us. If the item is found to be faulty, we will also refund the postage cost. If there is no damage to the item, but a return is approved, the buyer will be responsible for both the initial and return shipping cost. It is at our discretion to refuse the refund of undamaged goods. If an order is placed and you would like to cancel the order, please notify us immediately. Any refunds will be processed via the same means that payment was made.
  • Creator:
    Charles and Ray Eames (Designer),Herman Miller (Manufacturer)
  • Dimensions:
    Height: 30 in (76.2 cm)Width: 25 in (63.5 cm)Depth: 24 in (60.96 cm)
  • Style:
    Modern (In the Style Of)
  • Materials and Techniques:
  • Place of Origin:
  • Period:
  • Date of Manufacture:
    1953
  • Condition:
    Wear consistent with age and use.
  • Seller Location:
    Philadelphia, PA
  • Reference Number:
    Seller: 231026011stDibs: LU8164240514902

More From This Seller

View All
1953 Herman Miller Eames RAR Rocking Fiberglass Arm Chair w/ Shock Mounts
By Herman Miller, Charles and Ray Eames
Located in Philadelphia, PA
This is a ‘RAR’ Rocking Chair, designed by Charles & Ray Eames in 1950. This particular chair dates to around 1953. The piece consists of a fiberglass “shell” seat and back, ...
Category

Vintage 1950s American Modern Lounge Chairs

Materials

Metal

C. 1950 Herman Miller Eames Zenith SAX Fiberglass Rope Edge Arm Shell Chair
By Charles and Ray Eames, Herman Miller
Located in Philadelphia, PA
This is a Zenith SAX Arm Chair, originally designed by Ray and Charles Eames in 1950. This particular example was produced by Herman Miller in the USA C. 1950. The chair is comprised...
Category

Vintage 1950s American Modern Side Chairs

Materials

Steel

1952 Herman Miller Eames LCM Lounge Chair Metal Legs with Ebonized Wood Finish
By Herman Miller, Charles and Ray Eames
Located in Philadelphia, PA
Listed for sale is a vintage Herman Miller LCM (Lounge Chair Metal), designed by Ray and Charles Eames. This example was produced circa 1952 and was later repaired by Herman Miller (...
Category

Vintage 1950s American Modern Lounge Chairs

Materials

Metal

1954 Herman Miller Eames Rope Edge DAX Arm Shell Dining Chair X Base 3 Available
By Herman Miller, Charles and Ray Eames
Located in Philadelphia, PA
These are Eames DAX fiberglass dining chairs, initially designed by Ray and Charles Eames in 1950. These particular examples were produced by Herman Miller in the USA C. 1954. Their design incorporates a tan fiberglass shell seat atop a steel X-base. DAX is an acronym for Dining Arm X Base Chair...
Category

Vintage 1950s American Modern Side Chairs

Materials

Steel

C. 1952 Rare Herman Miller Evans Eames DCM Chair w/ Original Upholstery & Label
By Herman Miller, Charles and Ray Eames
Located in Philadelphia, PA
This is an Eames DCM Side Chair, originally designed by Charles and Ray Eames in 1946. This early example was manufactured circa 1952, and it appears to be a late Evans / early Herma...
Category

Vintage 1950s American Modern Side Chairs

Materials

Steel

1954 Charles and Ray Eames for Herman Miller DCM Dining Chair w/ Ebonized Finish
By Herman Miller, Charles and Ray Eames
Located in Philadelphia, PA
This is a DCM Chair, originally designed by Charles and Ray Eames in 1946. This particular piece was produced by Herman Miller and retains its tag under the seat. This example dates ...
Category

Vintage 1950s American Modern Side Chairs

Materials

Steel

You May Also Like

Eames Herman Miller LAX Fiberglass Arm Shell Chair X Base Zenith Rope Edge
By Herman Miller, Zenith, Charles and Ray Eames
Located in Topeka, KS
Awesome example of the Charles and Ray Eames LAX molded fiberglass arm shell chair for Herman Miller in one of the original colors, lemon yellow. This is an early chair made by Zenit...
Category

Vintage 1950s American Mid-Century Modern Armchairs

Materials

Metal

Early Charles and Ray Eames for Herman Miller Midcentury Rope Edge Armchair
By Herman Miller, Charles and Ray Eames
Located in Countryside, IL
Early Charles and Ray Eames for Herman Miller midcentury rope edge armchair This chair measures: 24.5 wide x 22 deep x 31 inches high, w...
Category

Vintage 1970s American Mid-Century Modern Swivel Chairs

Materials

Metal

1950s Rare Eames Zenith Side Chair for Herman Miller, USA
By Charles and Ray Eames
Located in Amsterdam, NL
A very rare side chair designed by Charles & Ray Eames, manufactured by Zenith / Herman Miller in the United States of America around 1950. The first fiberglass Eames chairs were pr...
Category

Vintage 1950s American Chairs

Materials

Metal

Herman Miller Eames DAX Fiberglass Chair
By Herman Miller, Charles and Ray Eames
Located in Brooklyn, NY
Gorgeous and rare hue of red orange on this vintage fiberglass Herman Miller Eames armchair. Model DAX with H base. All shock mounts intact. Stamped Herman Miller under chair and gua...
Category

Mid-20th Century American Mid-Century Modern Armchairs

Materials

Fiberglass

Early Eames LAR Fiberglass Armshell Lounge Chair for Herman Miller pair avaiable
By Herman Miller, Charles and Ray Eames
Located in San Diego, CA
Rare Eames LAR chairs for Herman Miller. Parchment molded fiberglass LAR chair designed by Charles and Ray Eames for Herman Miller. On wire "cat's cradle" base. This example dates to circa 1954 and was in production as one of the five introductory base styles when the fiberglass shells were introduced in 1950. It does not have a rope edge, which pushes in slightly later into the 1950s. One chair with early Orange Herman Miller label. The other chair without a label. Shells are clean but show some patina as does the base. Shock mounts look to be original and in good working order. These chairs have continued to become more and more difficult to find. Condition on this example is very good with some wear as to be expected. Dimensions: 25" L x 24" D x 24.5"H, Seat Height: 11.5" The Eames LAR Cats Cradle Chair or abbreviated Low (L) Height, Arm (A) Chair on Rod (R) Base was one of the ‘original 5’ of base types the fiberglass shell chairs were released with, in 1950. Essentially designed as a lounge height chair, the LAR base developed the popular common name ‘Cats Cradle’ and remains a favorite with collectors today. The Eames LAR Chair was certainly a masterful design, different from any of the other options of the ‘original 5’ and providing a third lounge option for the plastic chair series along with the RAR and LAX (DAX Variant). It was also quite a contrast to the stark and traditional typical seating designs of the 1940’s and 1950’s. The rod wire base was bent into shape to provide two horizontal struts to connect with the floor and give the almost triangular visual. The original 5 bases released in the 1950 first generation included the rocking RAR, the Eiffel DAR, the dowel leg DAW and four legged DAX along with the LAR. The Eames Cats...
Category

Vintage 1950s American Mid-Century Modern Chairs

Materials

Metal

DAX Armchair by Charles & Ray Eames for Herman Miller
By Herman Miller, Charles and Ray Eames
Located in Sagaponack, NY
A rope edge fiberglass "Zenith" shell chair with a brushed steel X-base, in elephant grey.
Category

Vintage 1960s American Mid-Century Modern Chairs

Materials

Steel