Skip to main content
Want more images or videos?
Request additional images or videos from the seller
1 of 12

1946 Pair of RARE Evans Eames Herman Miller DCW Dining Chairs in Calico Ash

About the Item

This is a pair of DCW Dining Chairs in Calico Ash, originally designed by Charles and Ray Eames in 1946. These are ultra-rare, early examples that were produced by the Evans Plywood Company. These came to us via the estate of a Cornell University professor in Ithaca, New York. One chair retains its original Evans label, which is the earliest label used aside from those used on pre-production models. Each chair measures 20.5 inches deep, 19.5 inches wide, and 29 inches high. Their seat height is 18 inches. One chair does have some scratches on the front surface, and there is patina present on both pieces’ original screws and hardware on underside. There is some slight fading to the finish of the seats. Overall, this important pair is in good vintage condition with some signs of time. Please see photos. Genuinely faulty goods will be replaced or money refunded on a case by case basis, however we must be advised of any faulty goods upon receipt of the item. It is the customer's responsibility to pay for return shipping and ship the item back to us. If the item is found to be faulty, we will also refund the postage cost. If there is no damage to the item, but a return is approved, the buyer will be responsible for both the initial and return shipping cost. It is at our discretion to refuse the refund of undamaged goods. If an order is placed and you would like to cancel the order, please notify us immediately. Any refunds will be processed via the same means that payment was made.
  • Creator:
  • Dimensions:
    Height: 29 in (73.66 cm)Width: 19.25 in (48.9 cm)Depth: 20.5 in (52.07 cm)
  • Sold As:
    Set of 2
  • Style:
    Modern (In the Style Of)
  • Materials and Techniques:
  • Place of Origin:
  • Period:
  • Date of Manufacture:
    1946
  • Condition:
    Wear consistent with age and use.
  • Seller Location:
    Philadelphia, PA
  • Reference Number:
    Seller: 230822021stDibs: LU8164240509162

More From This Seller

View All
1946 Pair of Eames Evans DCW Dining Chairs in Calico Ash Wood
By Evans Products Company, Charles and Ray Eames
Located in Philadelphia, PA
This is a pair of DCW Dining Chairs in Calico Ash, originally designed by Charles and Ray Eames in 1946. These are ultra-rare, early examples that were produced by the Evans Plywood ...
Category

Vintage 1940s American Modern Side Chairs

Materials

Steel

1947 Rare Eames Evans Herman Miller DCW Dining Chair in Calico Ash & Fabric
By Herman Miller, Charles and Ray Eames
Located in Philadelphia, PA
This is a mega rare upholstered Eames DCW dining chair, dating to circa 1947. It has the 5-2-5 screw pattern underneath, indicating production by Evans Products Company for Herman Miller. This example is in very good to excellent vintage condition with some light wear from use and nice patina. See photos. The hardware appears to be completely original and wood is calico ash. It should be noted that upholstered Eames plywood chairs...
Category

Vintage 1940s American Modern Side Chairs

Materials

Fabric

C. 1948 Set of 4 Evans Herman Miller Eames DCW Dining Chairs in Calico Ash
By Charles and Ray Eames, Herman Miller
Located in Philadelphia, PA
This is a set of four DCW Dining Chairs in Calico Ash, initially designed by Charles and Ray Eames in 1946. These are ultra-rare, early examples that were produced by the Evans Plywo...
Category

Vintage 1940s American Modern Side Chairs

Materials

Steel

1946 Eames Evans Herman Miller CTW Round Wood Coffee Table in Calico Ash
By Charles and Ray Eames, Evans Products Company
Located in Philadelphia, PA
This is a CTW Circular Wood Leg Coffee Table, initially designed by Ray and Charles Eames for the Evans Molded Plywood Company in 1946. It was released as a part of the "Plywood Grou...
Category

Vintage 1940s American Modern Coffee and Cocktail Tables

Materials

Steel

1950s Pair of Herman Miller Eames LCW Lounge Chairs in Calico Ash
By Herman Miller, Charles and Ray Eames
Located in Philadelphia, PA
This is a pair of LCW Lounge Chairs, originally designed by Ray and Charles Eames in 1948. They are early Herman Miller examples and feature the 5-2-4 screw pattern, dating back to t...
Category

Vintage 1950s American Modern Lounge Chairs

Materials

Steel

C. 1953 Herman Miller Eames LCW Lounge Chair in Calico Ash
By Charles and Ray Eames, Herman Miller
Located in Philadelphia, PA
This is an LCW Lounge Chair, originally designed by Charles and Ray Eames in 1948. It is an early Herman Miller example featuring the 5-2-4 screw pattern, dating it to ca. 1953. The ...
Category

Vintage 1950s American Modern Lounge Chairs

Materials

Steel

You May Also Like

Early Herman Miller Eames DCW Dining Chair in Calico Ash
By Herman Miller, Charles and Ray Eames
Located in Brooklyn, NY
Early and original Eames DCW chair manufactured by Herman Miller. Executed in Calico Ash. All original shock mounts. 5-2-4 screw pattern under the chair indicates this is a 1950s Her...
Category

Mid-20th Century American Mid-Century Modern Dining Room Chairs

Materials

Ash

4 Herman Miller Eames DCW Dining Chairs Wood in Light Ash
By Herman Miller, Charles and Ray Eames
Located in Palm Springs, CA
A beautiful set of 4 early 2000’s DCW for Dining Chairs Wood by Charles and Ray Eames for Herman Miller. The label dates them to the period between 2003-2007 approximately when that ...
Category

Early 2000s American Dining Room Chairs

Materials

Wood

1940s Pair of Early Charles Eames for Herman Miller LCW Lounge Chairs in Oak
By Evans Products Company, Herman Miller, Charles and Ray Eames
Located in Philadelphia, PA
Designed in the late 1940s by Charles Eames, this chair has cemented itself in Mid-Century Design like very few other pieces. Early models like this are difficult to come by and are very rarely in such good condition, as many have been worked on in some way or another before their value shot up. These chairs feature a super sleek design of steam-bent plywood, an incredibly innovative technique pioneered by Herman Miller in collaboration with the Eames's and manufacturing firm Evans. The large seat and back are mounted to a molded plywood base with rubber shock mounts, another Eames staple. This allows them to have excellent contrast through spacing, which gives them an excellent stance, almost insect-like. Both are early chairs with the correct screw configurations beneath. This pair features all original hardware, finish, and shock mounts. Very few blemishes, and those that exist are minimal, barely visible even in our high-res pictures. At this time, we have two early pairs, as seen in in photos. We also have another single early model, and two extremely rare pre-production chairs with the accompanying molded plywood coffee table...
Category

Vintage 1940s American Mid-Century Modern Lounge Chairs

Materials

Plywood

1940s Pair of Early Charles Eames for Herman Miller Lcw Lounge Chairs in Birch
By Charles and Ray Eames, Herman Miller, Evans Products Company
Located in Philadelphia, PA
Designed in the late 1940s by Charles Eames, this chair has cemented itself in Mid-Century Design like very few other pieces. Early models like this are difficult to come by and are very rarely in such good condition, as many have been worked on in some way or another before their value shot up. These chairs feature a super sleek design of steam-bent plywood, an incredibly innovative technique pioneered by Herman Miller in collaboration with the Eames's and manufacturing firm Evans. The large seat and back are mounted to a molded plywood base with rubber shock mounts, another Eames staple. This allows them to have excellent contrast through spacing, which gives them an excellent stance, almost insect-like. Both are early chairs with the 5-2-5 screw configurations beneath. This pair features all original hardware, finish, and shock mounts. Very few blemishes, and those that exist are minimal, barely visible even in our high-res pictures. At this time, we have two early pairs, as seen in in photos. We also have another single early model, and two extremely rare pre-production chairs with the accompanying molded plywood coffee table...
Category

Vintage 1940s American Mid-Century Modern Lounge Chairs

Materials

Rubber, Wood, Plywood

Fine Charles Eames for Evans Sold by Herman Miller Ash Grain DCM Dining Chair
By Evans Products Company, Herman Miller, Charles and Ray Eames
Located in Ferndale, MI
Very nice early production Charles and Ray Eames designed dining chair metal (DCM ). Clean chrome frame supports ash grain seat and back. Retains original Eames Evans Herman Miller w...
Category

Mid-20th Century American Mid-Century Modern Dining Room Chairs

Materials

Chrome

Mid Century Modern Early Version C1946 Evans Eames LCW Lounge Chair in Birch
By Evans Products Company, Charles and Ray Eames
Located in Port Jervis, NY
What more can be said about this chair. Such a revolutionary design which took a fair amount of time to perfect. This particular chair is crafted from birch and bears all the origina...
Category

Vintage 1940s American Mid-Century Modern Lounge Chairs

Materials

Birch, Plywood

Recently Viewed

View All