Skip to main content
Want more images or videos?
Request additional images or videos from the seller
1 of 11

2010s Ray and Charles Eames for Herman Miller Wire Bar Stool w/ Bikini Pad

$900per item
£677.02per item
€784.29per item
CA$1,268.81per item
A$1,411.01per item
CHF 740.45per item
MX$17,206.53per item
NOK 9,359.58per item
SEK 8,774.98per item
DKK 5,853.86per item
Quantity

About the Item

This is an Eames wire shell stool, initially designed by Ray and Charles Eames for Herman Miller in 1951. These examples date to the 2010s. The listed price includes one stool, and we have several stools available for purchase. The design incorporates a shell seat composed of chromed-steel wire, and has a two-piece black leather “bikini” pad. The four-legged H base is strong yet streamlined, and the curvature of the seat was designed with ergonomics in mind. Each stool measures 22 inches deep, 18.75 inches wide, and 45.25 inches high. Their seat height is 31.25 inches. There are some small hairline scratches on the bases when looking closely, and there is a slight patina on the leather. Overall, these bar stools are in excellent condition. Please see photos. Genuinely faulty goods will be replaced or money refunded on a case by case basis, however we must be advised of any faulty goods upon receipt of the item. It is the customer's responsibility to pay for return shipping and ship the item back to us. If the item is found to be faulty, we will also refund the postage cost. If there is no damage to the item, but a return is approved, the buyer will be responsible for both the initial and return shipping cost. It is at our discretion to refuse the refund of undamaged goods. If an order is placed and you would like to cancel the order, please notify us immediately. Any refunds will be processed via the same means that payment was made.
  • Creator:
    Charles and Ray Eames (Designer),Herman Miller (Manufacturer)
  • Dimensions:
    Height: 45.25 in (114.94 cm)Width: 18.75 in (47.63 cm)Depth: 22 in (55.88 cm)
  • Style:
    Modern (In the Style Of)
  • Materials and Techniques:
  • Place of Origin:
  • Period:
  • Date of Manufacture:
    2010
  • Condition:
    Wear consistent with age and use.
  • Seller Location:
    Philadelphia, PA
  • Reference Number:
    Seller: 231106021stDibs: LU8164240513712

More From This Seller

View All
2015 Herman Miller Stacking Eames Plastic Side Shell Dining Chairs 4x Available
By Herman Miller, Charles and Ray Eames
Located in Philadelphia, PA
These are Eames DSS Chairs, originally designed by Ray and Charles Eames in the 1950s. These particular examples were produced by Herman Miller in the USA in 2015. The listed price i...
Category

2010s American Modern Side Chairs

Materials

Steel

1957 Set of 6 Herman Miller Eames DKR-2 Wire Dining Chairs w/ Base & Bikini Pads
By Herman Miller, Charles and Ray Eames
Located in Philadelphia, PA
Listed for sale is a vintage set of six Eames DKR-2 wire dining chairs with black bikini pads, produced circa 1957. The DKR was designed by Charles and Ray Eames, produced by Herman ...
Category

Vintage 1950s American Modern Dining Room Chairs

Materials

Metal

2019 Herman Miller Eames DSW Molded Wood Side Chair w/ Dowel Base in Black
By Charles and Ray Eames, Herman Miller
Located in Philadelphia, PA
This is an Eames DSW Side Chair, originally designed by Ray and Charles Eames for Herman Miller in 1948. These particular examples were produced by Herman Miller in the USA in 2019. ...
Category

2010s American Modern Side Chairs

Materials

Steel

2010s Christophe Pillet for Emeco Sezz Bar Stool in Brushed Aluminum
By Christophe Pillet, Emeco
Located in Philadelphia, PA
These are Sezz Bar Stools, originally designed by Christophe Pillet for Emeco in 2012. These particular examples were produced in the 2010s. Their design is comprised of a brushed al...
Category

2010s American Modern Stools

Materials

Aluminum

1970s Herman Miller Eames DCMU Chair with Black Fabric Upholstery 8x Available
By Charles and Ray Eames, Herman Miller
Located in Philadelphia, PA
This is an Eames DCMU Chair, designed by Charles and Ray Eames for Herman Miller. This model was designed in 1970. The acronym DCMU stands for Dining Height...
Category

Vintage 1970s American Modern Dining Room Chairs

Materials

Steel

1960s Pair of Eames Herman Miller DKR-1 Chairs w/ Eiffel Bases in Girard Fabric
By Herman Miller, Charles and Ray Eames
Located in Philadelphia, PA
This is an extremely rare pair of Eames DKR-1 Side Chairs, originally designed by Charles and Ray Eames for Herman Miller in 1951. The listed price includes the pair. These examples ...
Category

Vintage 1960s American Modern Side Chairs

Materials

Steel

You May Also Like

Grey Eames Molded Plastic Bar Stool, Herman Miller
By Herman Miller, Charles and Ray Eames
Located in Miami, FL
Grey Eames Molded Plastic Bar Stool by Herman Miller 2020. Price is for one stool. In total 6 stools available.
Category

2010s American Modern Stools

Materials

Chrome

Set of Two Herman Miller Mid Century Modern Charles Eames "PSW" Barstools
By Herman Miller, Charles Eames
Located in Dronten, NL
Beautiful pair of barstools designed by Charles & Ray Eames in off-white fiberglass with a maple swivel dowel base. The stools are marked with the embedded Herman Miller logo undern...
Category

Mid-20th Century American Mid-Century Modern Stools

Materials

Steel

1 Midcentury H Miller Eames Fiberglass Stool with H-Base
By Charles and Ray Eames
Located in Pasadena, TX
Charles and Ray Eames Charles and Ray married in 1941 and moved to California where they continued their furniture design work with molding plywood. During the war, they were commissioned by the Navy to produce molded plywood splints, stretchers, and experimental glider shells. In 1946, Evans Products began producing the Eameses` molded plywood furniture. Their molded plywood chair was called "the chair of the century" by the influential architectural critic Esther McCoy. Soon production was taken over by Herman Miller, Inc ., who continues to produce the furniture in the United States to this day. Another company, Vitra International, manufactures furniture in Europe. The Eameses continued to create new furniture designs into the 1970s. Examples include the molded plastic or fiberglass chairs from the early 1950s and the famous lounge chair and ottoman from 1956. Sturdy, comfortable and elegant office furniture was created in the 1960s, as well as seating designed for Dulles and O`Hare Airports. This Tandem Sling Seating is still in use in airports around the world today. 1948 designed Herman Miller Eames vinyl...
Category

Mid-20th Century American Mid-Century Modern Stools

Materials

Chrome

Cherner Bar Stool with Metal Base
By The Cherner Chair Company, Norman Cherner
Located in Berkeley, CA
The 1958 molded plywood stools by Norman Cherner have been seen in some high places. Available in counter or bar height with a wood or metal base....
Category

21st Century and Contemporary American Mid-Century Modern Stools

Materials

Walnut

Eames Herman Miller Drafting Stool Shell Chair
By Charles and Ray Eames, Herman Miller
Located in Fraser, MI
Please feel free to reach out for efficient shipping quote to your location. Eames shell chair on drafting base. Shell designed by Charles Eames and Don Albinson for the Eames offic...
Category

Vintage 1960s Stools

Materials

Aluminum, Steel

Eames for Herman Miller Pair of Molded Plastic Bar Stools 2010s (signed)
By Charles and Ray Eames, Herman Miller
Located in Brooklyn, NY
One iconic pair of light gray molded plastic bar stools by Charles & Ray Eames for Herman Miller, 2010s. These beautiful stools were very lightly used. The perfect combination of com...
Category

2010s American Mid-Century Modern Stools

Materials

Steel