Skip to main content
Want more images or videos?
Request additional images or videos from the seller
1 of 19

Charles & Ray Eames for Herman Miller Restored Rosewood Conference Dining Table

$6,000
£4,539.41
€5,239.19
CA$8,380.33
A$9,317.33
CHF 4,877.06
MX$114,273.93
NOK 62,097.29
SEK 58,627.20
DKK 39,096.52
Shipping
Retrieving quote...
The 1stDibs Promise:
Authenticity Guarantee,
Money-Back Guarantee,
24-Hour Cancellation

About the Item

This rare table was designed by Charles and Ray Eames in the early 1960s for Herman Miller, the producer of all Eames designs at the time. It was not widely produced at the time, and very few were made. In fact, this example is likely a custom order from the very first years of production, dated by the metal label on the underside of the top. It also features the most desirable wood, rosewood, and is the perfect size and height (28.5 in.) to be a dining table, conference table, or large desk. Perfect for any modern home, you will be sure to love the practicality and design of this table. Condition: The top has been professionally refinished. This includes sanding, application of new stain and clear coat, and buffed to a shine. Ready for use in your home or project.

More From This Seller

View All
Milo Baughman for Directional Dining Table in Walnut, Rosewood, Ash w/ 2 Leaves
By Directional, Milo Baughman, Johnson Furniture Company
Located in Philadelphia, PA
Made in the Unites States in the 1960s, this piece was manufactured by Johnson Furniture Co. and sold by Directional, who consistently sold smash hits from the likes of Paul Evans an...
Category

Vintage 1960s American Mid-Century Modern Dining Room Tables

Materials

Hardwood, Ash, Rosewood, Walnut

Mid Century Modern Dining Room Table in Walnut by Arthur Umanoff
By Dillingham Manufacturing Company, Arthur Umanoff
Located in Philadelphia, PA
A clean line dining table by Arthur Umanoff circa 1960's. It features beautiful walnut wood construction. It comes with one 18 inch leaves not...
Category

Vintage 1960s American Mid-Century Modern Dining Room Tables

Materials

Walnut

Paul McCobb for Lane 'Delineator' Walnut Extension Dining Table with 3 Leaves
By Lane Furniture, Paul McCobb
Located in Philadelphia, PA
Made here in the USA by Lane Furniture, this table was designed by Paul McCobb, renowned as an extraordinarily prolific American designer. With a 42" circular top in its smallest for...
Category

Vintage 1960s American Mid-Century Modern Dining Room Tables

Materials

Metal

Massive Mid Century American Studio Modern Walnut & Travertine Dining Table
Located in Philadelphia, PA
A monumental 10 x 5 foot dining table in solid walnut and inlayed travertine circa 1960's. This table was studio made in the mid twentieth century....
Category

Vintage 1960s American Mid-Century Modern Dining Room Tables

Materials

Travertine

Unusual Rastad & Relling for Gustav Model R3 Rosewood Dining Table with 2 Leaves
By Adolf Relling and Rolf Rastad
Located in Philadelphia, PA
Designed and made in Norway, this dining table features a wonderful combination of great Norwegian design and awesome production quality. With frame made of walnut hardwood, it featu...
Category

Vintage 1960s Norwegian Mid-Century Modern Dining Room Tables

Materials

Rosewood, Walnut

Restored Hans J. Wegner for Andreas Tuck AT-319 Drop-Leaf Rosewood Dining Table
By Hans J. Wegner, Andreas Tuck Møbelfabrik
Located in Philadelphia, PA
This incredible table was designed by Danish legend Hans J. Wegner for production by Andreas Tuck Mobelfabrik, who was responsible for many of Wegner's early designs and established the precedent of exceptional build quality we know from Wegner pieces today. There were a few versions of this table, some in other woods, but all of them smaller. We have the largest version of this table ever produced, the AT-319, which extends up to just shy of 10 feet long with both drop-leaf panels attached and deployed. This is also a rosewood model, long held as the most desirable. The quality of this table is among the best from the era. Easily comparable to other exceptional pieces by Wegner, Finn Juhl, and Fritz Hansen. The base is entirely chrome plated steel with precision-manufactured steel bars added for support. The hinges for the drop-leaves are also of steel. Beneath the table, the mechanism for the sliding panels which hold the leaves up is crafted of solid wood and securely mounted the top with tens of screws. The classic attention to detail by Andreas Tuck has resulted in bookmatched rosewood both atop and beneath the table, a measure not taken by other factories for cost-saving. There were absolutely no cost-saving measures for this table's production. This table is in original condition, but will receive a complete restoration upon purchase. This involves a laborious process, including careful hand-sanding and chemical stripping of the top. A new finish is applied with industrial-grade tools, then sealed using a clear lacquer. Finally, it will spend hours in the polishing booth, resulting in an exceptional shine. When complete, this table will look better than it did new. Our in-house professionals have decades of experience working on the most exclusive pieces. In the last few photos are other pieces that we have restored so that you may get a sense of our work. Nanna Ditzel Rosewood Desk This is the polished finish we think will suit the piece best. It allows the rosewood to shine in full glory and creates incredible contrast. Florence Knoll Rosewood Cabinets...
Category

Vintage 1950s Danish Mid-Century Modern Dining Room Tables

Materials

Steel, Chrome

You May Also Like

Eames Herman Miller Oval Conference Dining Table Universal Segmented Cherry
By Herman Miller, Charles and Ray Eames
Located in Topeka, KS
Fabulous vintage MCM (Mid-Century Modern) Eames for Herman Miller racetrack oval conference or dining table with a black universal segmented base and cherry wood veneer top with blac...
Category

21st Century and Contemporary American Mid-Century Modern Dining Room Ta...

Materials

Aluminum, Steel

Charles & Ray Eames for Herman Miller Conference Dining Table
By Charles and Ray Eames, Herman Miller
Located in San Pedro Garza Garcia, Nuevo Leon
Rosewood top Aluminum Group Conference Table, missing a padded leg.
Category

Vintage 1970s American Mid-Century Modern Conference Tables

Materials

Aluminum

Charles & Ray Eames Herman Miller Walnut Segmented Base Racetrack Dining Table
By Charles and Ray Eames
Located in Forest Grove, PA
Eight foot long walnut dining / conference table designed by Charles and Ray Eames and manufactured by Herman Miller. Stamped "64128" and signed with the " double ring black metal" E...
Category

Vintage 1960s American Mid-Century Modern Dining Room Tables

Materials

Aluminum

Herman Miller Eames Conference or Dining Table in Rosewood
By Herman Miller, Charles and Ray Eames
Located in Cedar Falls, IA
Charles and Ray Eames segmented base table for Herman Miller. 10 foot continuous length top. Incredible rosewood color and grain throughout. Polished...
Category

Vintage 1970s American Mid-Century Modern Dining Room Tables

Materials

Aluminum

Eames for Herman Miller Round Seven Foot Conference Table in Rosewood
By Herman Miller, Charles Eames, Charles and Ray Eames
Located in BROOKLYN, NY
A glorious and monumental Mid-Century Modern conference table or dining table designed by Charles and Ray Eames for Herman Miller in rosewood. Segmented aluminium base with a 7’ roun...
Category

Mid-20th Century American Mid-Century Modern Conference Tables

Materials

Aluminum, Steel

Eames Herman Miller Mid Century Conference Dinning Table, 1960s 245cm Diameter
By Herman Miller, Charles and Ray Eames
Located in Mortsel, BE
Introducing the large conference table by Herman Miller Eames, a striking centerpiece that commands attention with its impressive size and timeless allure. The wooden tabletop, showc...
Category

Late 20th Century American Mid-Century Modern Conference Tables

Materials

Metal, Steel