Furniture

Good vintage condition with trace of age and use for this set of four Bikini chairs designed by Charles and Ray Eames for Herman Miller. Some rust spots on the metal. Original from 60s.

2nd Generation Eames DAR [Dining (D) height, Arm (A) Chair, on Rod (R) Base] with rare, Herman Miller Red Venice Label. Production of these specific chairs w...

Charles Eames for Herman Miller fiberglass DSX shell chair. Circa 1970. Retains all it's plastic glides. Shock mounts are in good condition with no visible drying or cracking. Struct...

A wonderful set of four fiberglass armchairs designed by Charles and Ray Eames for Herman Miller. Offered in a rare olive green color that doesn't surface often. One of the most re...

Vintage Eames Herman Miller MCM Aluminum Group 4 Prong Contract Base White Laminate Top Table Handsome vintage Eames for Herman Miller mid-century modern Aluminum Group 4 prong chro...

A Birch Plywood and canvas screen Early production Original finish.

Charles Eames Swivel chair from around the year 2000, appears in good condition with some signs of use.

Pair of early production Dining Chair Metal DCM designed by the Charles and Ray Eames team . Black wrought iron frames support black aniline dyed wood seats and backs. Finish shows w...

Charles and Ray Eames for Herman Miller DKX-1 chairs, set of four, black leather, H-base, circa 1954, Boot glides The abbreviated Eames DKX chair, part of the Wire Mesh Series, stood for Dining (D) height, K-Wire (K) chair on X-base (X). As with all the mesh series, the numbers represented the upholstery cut, with 1 meaning the full chair cover and 2 the two-part ‘bikini’ version. The X in the name of the DKX, LKX and MKX stands for the X-base, an original patterned base with a clear criss-cross where the base joins the top. This base was developed for the plastic series and was later utilized for the wire mesh chairs...

Rare early edition “EA116” designed by Charles and Ray Eames for Herman Miller in 1958. The stamp “Herman Miller Patent Pending” proves the antiquity of the pie...

1940s Brown walnut DCW plywood chair by Charles & Ray Eames Herman Miller Beautiful and really rare early DCW chair designed by Charles & Ray Eames. The chair is made out of walnu...

Matching pair of La Fonda tables designed by Charles and Ray Eames for Alexander Girard's La Fonda restaurant interior. These two tables have been toget...

Classic set of iconic Eames shell chairs by Herman Miller. Parchment color shells atop zinc plated steel stacking bases. All chairs with glides. Signed and guaranteed authentic vinta...

Chrome aluminum frame Black netweave seat Adjustable and reclining seat Excellent condition.

Vintage set of DKX dining chairs by Charles and Ray Eames for Herman Miller. All-black wire seats and H-bases with original black burlap-backed cloth seat c...

An iconic Mid-Century Modern CTM coffee table Designed by Charles and Ray Eames for Herman Miller USA, 1950s Ebonized ash top, with steel leg...

For sale is a lovely set of two iconic Vitra 671 Lounge Chairs, designed by Charles and Ray Eames in 1956. The Eames’ wanted to create a spacious armchair that combines ergonomics — ...

Classic Herman Miller Eames dining table. Model 650, executed in white Formica durable top with black banding and cast aluminum base. All glides present. Bas...

Impeccable molded swiveling armchair by Charles and Ray Eames for Herman Miller. Contractor base model.

Mid-Century Lounge Chair An iconic design by the legendary American husband and wife team. An early Herman Miller example. Ebonised ply on a chrome base. In original condition, i...

Set of 4 dark blue fibreglass chairs. Stamped Herman Miller (see photo). These are the Eiffels legs. One chair has been repaired and is still a bit damaged (see photo). Wear due to t...

Second generation ESU 251-C modular unit, designed by Charles and Ray Eames for Herman Miller. Inspired by industrial warehouse shelving, this original ESU features colorful, lacquer...

Charles and Ray Eames for Herman Miller mid century dining table The table measures: 53 wide x 53 deep x 29 high, with a chair clearance of 27 inches All pieces of furniture ca...

The DAX chair combines the shell of the 'Eames armchairs' with a classic four-legged base and is thus a realisation of the chair concept created by Charles and Ray Eames in the 1950s. Thanks to its relatively simple appearance, the dax chair is undoubtedly the most versatile of Eames plastic chairs...

A very clean example of a vintage modern icon. Charles Eames 670 & 671 Lounge chair and an ottoman produced by Herman Miller. Beautiful striations in...

Eames For Herman Miller Mid Century Fiberglass Shell Red Chair The chair measures: 24.75 wide x 22 deep x 31.25 high, with a seat...

Original Time Life Stool B, designed by Charles and Ray Eames. One of the three sculptural forms created by Ray Eames for the Time Life building in 196...

1st generation rope-edge Parchment fiberglass armchair, on original swivel maple base, designed by Ray and Charles Eames for Herman Miller. Distinct thread texture that varies in sat...

Charles (1907- 1978) and Ray Eames (1912-1988) An early set of four imaginative DKR-1 chairs by Charles and Ray Eames for Herman Miller. In white powder coated and chromed steel, wi...

Mid-Century Modern Charles & Ray Eames swivel chairs, ottoman, seating group Mid-Century Modern seating group having a pair of arm swivel chairs and a matching side table or ottom...

Beautiful custom edition of the iconic Eames lounge chair and ottoman. Rosewood shells have been restored and cradle the custom burnt orange leather cushions. New leather very soft a...

This early 1950s Herman Miller production of Charles and Ray Eames's classic bent plywood LCM chair, in oak and chrome, has all the original parts and is in very good vintage condition.

An Eames LCM lounge chair, Herman Miller, USA, 1950s. Ash plywood, chrome-plated steel and original rubber feet caps. With manufacturers label. ...

We are delighted to offer for sale 1 of 4 original fully stamped ICF for Charles Eames, EA105 Hopsak chrome swivel armchairs RRP £2,096 each. Super iconic, award winning, what more can you say, these are pretty much the most comfortable office chairs ever made, these are fully stamped with the model number to the base and the Eames label...

We adore the La Fonda design! These chairs were commissioned by Alexander Girard for a Mexican restaurant in the Time Life Building in New York that opened in 1961. To keep with the tradition, we reupholstered the chairs in the same Alexander Girard Checker...

Eames For Herman Miller Mid Century Fiberglass Shell Blue Chair The chair measures: 24.75 wide x 22 deep x 31.25 high, with a sea...

Charles and Ray Eames aluminum group side chair, EA330 office conference chair in dark olive green upholstery, five-star base, adjust t...

Offered here is a Charles and Ray Eames designed 1st Generation RKR Rocker for Herman Miller Two Birch wooden rockers, steel rod base and main body of the ...

Classic Eames DCM dining chair in black. Colored ash seat and back along with chrome frame. Self leveling nylon glides intact, allowing for use on mul...

Vintage Aluminum Group Ottoman / Stool by Eames for Herman Miller. Stamped Herman Miller.

Gorgeous Eames for Herman Miller segmented base table with taupe base and table edge, rectangular natural oak wood veneer top, and aluminum spi...

Early model Eames for Herman Miller fiberglass dax shell dining chair in orange. it is stamped Herman Miller and has the zenith Prime circle logo st...

Authentic and rare RAR Rocking chair designed by Ray & Charles Eames for Herman Miller. This rocking chair was manufactured in the 1960s. The rocking chair is in original vintage con...

Nice golden patina on a pair of Charles and Ray Eames fiberglass shell chairs. Earlier production with original slotted screws attachi...

Iconic vintage Eames PAC, pivoting armchair on cast aluminum base, with yellow Naugahyde padded swivel seat on gray fiberglass shell. It is in wonderful vint...

Suite of original time life stools, including models A, B, C, designed by Ray and Charles Eames. A striking design first commissioned for the Time Life Building and informed by Ray E...

The Aluminum Group chairs by Charles & Ray Eames are one of the most important designs of the 20th Century. Their original design from the 1950s is still relevant today, giving interiors all over the world a touch of modern elegance. On offer we have a set consisting of the EA124 Lounge Chair and EA125...

Very nice early production Charles and Ray Eames designed dining chair metal (DCM ). Clean chrome frame supports ash grain seat and back. Retains original Eames Evans Herman Miller w...

Original 1960s Eames terracotta fiberglass shell chairs with original H bases, designed by Charles and Ray Eames for Herman Miller. The scarce terracotta shell has its original finis...

Eames Flag from the 1964 Worlds Fair in Queens New York with custom-made base. An example of Eames mid-century modern architectural elements and design desi...

American Mid-Century Modern design rocking chair designed by Charles & Ray Eames and produced by Herman Miller with original fiberglass frame and fabric upholstered seat, refurbished...

DCM chair (Dining metal chair) by Charles and Ray Eames for Herman Miller. Designed in 1946, this molded plywood + chromed ste...

A molded ash plywood DCW (dining chair wood) frame with slunk skin upholstered seat and seat back. Produced between 1948-1953 and having the early 12 screw ...

The series of plastic chairs created by Charles and Ray Eames for Vitra are amongst the most recognised American furniture designs. A standout from this large family of chairs is the...

Charles and Ray Eames side chair DKX-1 in orange leather for Herman Miller, circa 1960s. The chair is in very good vintage condition, no damage to the leather, very solid chair.

Set of 4 Eames Herman Miller Stacking Chairs CIRCA 2000 Black molded material with fabric seat pad White powder coated base Signed Herm...

We are delighted to offer extremely rare and important pair of fully restored, original, Herman Miller No1 & Herman Miller Hillie circa 1958-1960 black leather and Rosewood lounge armchairs and ottomans These are pretty much the most iconic and well known armchair and ottoman ever made, exhibited countless times, displayed in the V&A, Metropolitan Museum of Art, winners of countless awards these are the simply put the finest suite around They have been on a journey, I’ve had all pieces stripped to the bare shells, the frames have been washed back and traditionally French polished, the leather all restored and hand dyed the original nero black, they are the finest example pair anywhere in the world today One suite has the black Herman Miller No1 label, the other, the earlier redish Herman Miller Hillie label Condition wise, the restoration has been done in such a way to keep all the original charm and patina but make them gallery ready, they will have age and use related patina marks here and there but mostly they are in very fine order Dimensions armchairs Height:- 80.5cm Width:- 85cm Depth:- 86.5cm Seat height:- 41cm Dimensions ottomans Height:- 42cm Width:- 65.5cm Depth:- 53.5cm Please note all measurements are taken at the widest point, MUST READ! The Eames Lounge Chair and ottoman are furnishings made of molded plywood and leather, designed by Charles and Ray Eames for the Herman Miller furniture company. They are officially titled Eames Lounge ( 670 ) and Ottoman ( 671 ) and were released in 1956 after years of development by designers. It was the first chair that the Eameses designed for a high-end market. Examples of these furnishings are part of the permanent collection of New York's Museum of Modern Art. Design Charles and Ray Eames sought to develop furniture that could be mass-produced and affordable, with the exception of the Eames Lounge Chair. This luxury item was inspired by the traditional English club chair. The Eames Lounge Chair is an icon of Modern style design, although when it was first made, Ray Eames remarked in a letter to Charles that the chair looked "comfortable and un-designy". Charles's vision was for a chair with "the warm, receptive look of a well-used first baseman's mitt." The chair is composed of three curved plywood shells covered with veneer: the headrest, the backrest and the seat. The layers are glued together and shaped under heat and pressure. The shells and the seat cushions are essentially of the same shape, and composed of two curved forms interlocking to form a solid mass. The chair back and headrest are identical in proportion, as are the seat and the ottoman. The products have changed in various ways over time. Beginning in 1956 and running through the very early 1990s, the shells were made up of five thin layers of plywood which were covered by a veneer of Brazilian rosewood. The use of Brazilian rosewood was discontinued in the early 1990s, and current production since then consists of seven layers of plywood covered by finishing veneers of cherry, walnut, palisander rosewood (a sustainably grown wood with similar grain patterns to the original Brazilian versions), and other finishes. Small changes include the sets of spacers between the aluminum spines and the wood panels, originally of rubber, later hard plastic washers, and the number of screws securing the armrests, originally three, changed to two in second-series models, while the "domes of silence" (glides/feet) on the chair base originally had thinner screws attaching them to the aluminum base than those on later chairs, and the zipper around the cushions, either brown or black on early models, was later black only. Further, early ottomans had removable rubber slide-on feet with metal glides, and early labels are of oblong foil. History The Eames Lounge Chair first...

Charles and Ray Eames second generation Zenith shell armchair, black enameled metal legs in X-pattern, large shock mounts, pale yellow fibergla...