Furniture

George Nelson Thin Edge Group eight drawer dresser for Herman Miller. Made with high quality construction and detail in Brazilian rosewood and oak with drawer dividers to help with ...

This listing is for a Vintage Herman Miller Aeron Office Desk Chair. Featuring lumbar support, polished aluminum, tuxedo pellicle, and black leathe...

These are Eames Aluminum Group Soft Pad Management Chairs, Model EA435, originally designed by Charles and Ray Eames for Herman Miller in 1969. These examples date to the year 1990. ...

This is an Eames Aluminum Group Management Chair, Model EA335, originally designed by Charles and Ray Eames for Herman Miller in 1958. These particular examples were produced in the ...

This is an original Eames Lounge Chair and Ottoman, model 670 and 671, designed by Charles and Ray Eames for Herman Miller in 1956. This set dates to 1964, per its label. The shells ...

Pedestal desk designed in 1955 by George Nelson for Herman Miller, USA. Teak wood top with two drawers underneath and polished aluminium bases.

We are delighted to offer for sale extremely rare and important lightly restored, original, Herman Miller No1 1960's black leather and Rosewood lounge armchair and ottoman This is...

We have eleven original 1960s Eames fiberglass shell chairs with original H bases. Narrow mount. Lovely rich brown color. These have their original finish and are gorgeous, gleaming,...

George Nelson for Herman Miller Vintage Action Office Table or Desk The Action Office desk or conference table was designed by American designer and architect George Nelson (1908-1986) for Herman Miller. A substantial piece, It features a beautifully grained walnut top mounted on a streamlined, polished stainless steel base. The desk top edge is trimmed in black rubber. to protect it against bumps and bruises. Two small desk drawers slide out from beneath the table top. The drawers can be removed if desired. The desk top has been recently restored and is in excellent condition. Action Office was originally designed as a set of components that could be combined in multiple ways and changed as needed to evolve with the office over time. George Nelson was one of the founders of American Modernism. From 1946 until 1972, Nelson was director of design at Herman Miller. While there, Nelson introduced several important innovations in office furniture design, such as the Swagged Leg Group, which included the DAF and MAA chairs...

1st generation LCW lounge chair designed by Charles and Ray Eames Produced by Evans Plywood Products circa 1948-49 Molded Ash plywood in black finish Remarkable condition with 5-2-5...

American mid-century modern coffee table ETR by Eames for Herman Miller, 1960s Coffee table mod. ETR with oval wooden top covered in black laminate. The elongated top is reminiscent ...

This is an Eames Aluminum Group Management Desk Chair, model EA335, originally designed by Charles and Ray Eames for Herman Miller in 1958. These particular examples date to 2007. Th...

Pair of early production Dining Chair Metal DCM designed by the Charles and Ray Eames team . Black wrought iron frames support black aniline dyed wood seats and backs. Finish shows w...

Very Rare and highly collectible original vintage George Nelson for Herman Miller rolltop "Action Desk". These early productions of these Herman Miller products hold more value than the more modern productions. This desk is beautiful from all angles. It is a brutalist, post modern, collectible work of art. Measures: Height: 34 inches Width: 54 inches Depth: 30 inches. Note: We do have the Herman Miller Aluminum Group desk chair...

This is an ES-108 Three-Seat Walnut Sofa, initially designed by Ray and Charles Eames for Herman Miller in 1984. This example dates to the 1990s. Its design consists of a solid alumi...

Rarely seen modernist action office desk or conference table by George Nelson for Herman Miller. Purchased from prominent Buffalo NY architect. Beautiful figured walnut wood top mino...

This early 1950s Herman Miller production of Charles and Ray Eames's classic bent plywood LCM chair, in oak and chrome, has all the original parts and is in very good vintage condition.

This is an original Eames Lounge Chair and Ottoman, models 670 and 671, designed by Charles and Ray Eames for Herman Miller in 1956. This set dates to 1962. The shells on this set ar...

A piece of the Eames should not be missing at home or office, and this is a good piece as for a desk as for a dining room, the top is in a good condition as well as the aluminum, it ...

Mid-Century Lounge Chair and Ottoman by Charles & Ray Eames for Herman Miller for ICF

Pair of Herman Miller produced original Eames Molded Shell Chair in a durable, 100 percent recyclable polypropylene. The subtle matte texture of the re-engineered plastic shell maint...

Caper stacking chair Designed by Jeff Weber for Herman Miller Caper’s polypropylene backrest is contoured to fit your back and perforated with holes to al...

We are delighted to offer extremely rare and important pair of fully restored, original, Herman Miller No1 & Herman Miller Hillie circa 1958-1960 black leather and Rosewood lounge armchairs and ottomans These are pretty much the most iconic and well known armchair and ottoman ever made, exhibited countless times, displayed in the V&A, Metropolitan Museum of Art, winners of countless awards these are the simply put the finest suite around They have been on a journey, I’ve had all pieces stripped to the bare shells, the frames have been washed back and traditionally French polished, the leather all restored and hand dyed the original nero black, they are the finest example pair anywhere in the world today One suite has the black Herman Miller No1 label, the other, the earlier redish Herman Miller Hillie label Condition wise, the restoration has been done in such a way to keep all the original charm and patina but make them gallery ready, they will have age and use related patina marks here and there but mostly they are in very fine order Dimensions armchairs Height:- 80.5cm Width:- 85cm Depth:- 86.5cm Seat height:- 41cm Dimensions ottomans Height:- 42cm Width:- 65.5cm Depth:- 53.5cm Please note all measurements are taken at the widest point, MUST READ! The Eames Lounge Chair and ottoman are furnishings made of molded plywood and leather, designed by Charles and Ray Eames for the Herman Miller furniture company. They are officially titled Eames Lounge ( 670 ) and Ottoman ( 671 ) and were released in 1956 after years of development by designers. It was the first chair that the Eameses designed for a high-end market. Examples of these furnishings are part of the permanent collection of New York's Museum of Modern Art. Design Charles and Ray Eames sought to develop furniture that could be mass-produced and affordable, with the exception of the Eames Lounge Chair. This luxury item was inspired by the traditional English club chair. The Eames Lounge Chair is an icon of Modern style design, although when it was first made, Ray Eames remarked in a letter to Charles that the chair looked "comfortable and un-designy". Charles's vision was for a chair with "the warm, receptive look of a well-used first baseman's mitt." The chair is composed of three curved plywood shells covered with veneer: the headrest, the backrest and the seat. The layers are glued together and shaped under heat and pressure. The shells and the seat cushions are essentially of the same shape, and composed of two curved forms interlocking to form a solid mass. The chair back and headrest are identical in proportion, as are the seat and the ottoman. The products have changed in various ways over time. Beginning in 1956 and running through the very early 1990s, the shells were made up of five thin layers of plywood which were covered by a veneer of Brazilian rosewood. The use of Brazilian rosewood was discontinued in the early 1990s, and current production since then consists of seven layers of plywood covered by finishing veneers of cherry, walnut, palisander rosewood (a sustainably grown wood with similar grain patterns to the original Brazilian versions), and other finishes. Small changes include the sets of spacers between the aluminum spines and the wood panels, originally of rubber, later hard plastic washers, and the number of screws securing the armrests, originally three, changed to two in second-series models, while the "domes of silence" (glides/feet) on the chair base originally had thinner screws attaching them to the aluminum base than those on later chairs, and the zipper around the cushions, either brown or black on early models, was later black only. Further, early ottomans had removable rubber slide-on feet with metal glides, and early labels are of oblong foil. History The Eames Lounge Chair first...

Charles Eames for Herman Miller Zebrawood DCM chairs, rare set. Zebrawood was used from 1954-1959. Very nice original condition, minor scuffs ...

George Nelson and Associates for Herman Miller "Marshmallow" Sofa, originally designed 1956, this example 2012, eighteen black leather upholstered cushions on a steel and black ename...

This is a Steel Frame No 4000 Series Dresser, initially designed by George Nelson for Herman Miller in 1954. Its model number is 4013. It features a frame of white powder-coated bent...

This is an original Eames Lounge Chair and Ottoman, models 670 and 671, designed by Charles and Ray Eames for Herman Miller in 1956. This set dates to ca. 1958. The shells on this se...

These are Eames Aluminum Group Soft Pad Executive Desk Chairs, Model EA437, initially designed by Charles and Ray Eames for Herman Miller in 1969. These pieces are newer examples, da...

Incredible vintage MCM (Mid-Century Modern) Eames for Herman Miller racetrack oval conference or dining table with a black universal segmented base and a light blonde laminate top wi...

A gorgeous "La Fonda" coffee table designed by Charles and Ray Eames for Herman Miller with original Botticinno marble top and polished aluminum base, circa 1970s. This rare table wa...

This authentic Eames for Herman Miller Aluminum Group Lounge Chair originally designed in 1958 as part of the Aluminum Group Collection was manufactured in 2005. The unique aluminum ...

This is an LCW Lounge Chair, originally designed by Charles and Ray Eames in 1948. It is an early Herman Miller example featuring the 5-2-4 screw pattern, dating it to ca. 1953. The ...

This is an Eames Aluminum Group Soft Pad Executive Chair, Model EA437, initially designed by Charles and Ray Eames for Herman Miller in 1968. These examples date to 2002. The listed ...

Beautiful dining table by Charles and Ray Eames for Herman Miller. The table has a 5-spoke base made of polished cast aluminum with rubber feet and a Carrara marble top.

This is an Eames Aluminum Group Management Desk Chair, designed by Charles and Ray Eames for Herman Miller in 1958. This particular chair was produced in the 2010’s. The design spo...

This is an Equa high back executive office chair designed by Bill Stumpf and Don Chadwick first introduced in the 80's. This chair has an original manufacturer's label from the 90's....

This is a single (multiple chairs are available, though sold individually) Eames Aluminum Group Management Desk Chair, designed by Charles and Ray Eames for Herman Miller in 1958. Th...

Eames executive chair ES-104, also known as the Time-Life chair, an iconic piece of mid-century design by Charles and Ray Eames. This chair was originally crafted for the executive f...

This is an ES-108 Three-Seat Teak Sofa, initially designed by Ray and Charles Eames for Herman Miller in 1984. This example dates to the 1990s. Its design consists of a solid aluminu...

This is a ‘DAR’ Armchair, originally designed by Charles and Ray Eames in 1950. This particular chair was produced by Herman Miller in 2016. The listed price includes one DAR cha...

This is an Eames Aluminum Group Management Chair, Model EA335, originally designed by Charles and Ray Eames for Herman Miller in 1958. These particular examples were produced in the ...

Very cool and collectible "Herman Miller" diecast tractor trailer truck toy with original box by Winross USA of Rochester, NY, circa 1980's. This is new old stock and appears to hav...

This is an Eames Aluminum Group Soft Pad Executive Desk Chair, Model EA437, initially designed by Charles and Ray Eames for Herman Miller in 1969. These are newer examples, dating to...

Part of the Thin Edge series that George Nelson designed for Herman Miller in the 1950s, this wonderful set comprises two dressers in a tawny walnut on either side of a suspended van...

Uncommonly seen 1940s dining / entry table designed by Gilbert Rohde for Herman Miller. The table has a beautiful marquetry design inlaid into the top and is accompanied by one leaf....

These are Eames Aluminum Group Soft Pad Management Desk Chairs, Model EA435, designed by Charles and Ray Eames for Herman Miller in 1969. These examples date to the 2010s. The listed...

Awesome Classic black Eames wire chair on a black eiffel base with the bikini cover for Herman Miller. The bikini cover is missing the button and has a te...

An American Midcentury-Modern classic. This slatted bench was designed by George Nelson for Herman Miller. It comprised of maple with ebonized legs. A design of balance, symmetry, an...

A rare birch dining or desk chair by Ernest Farmer of George Nelson and Associates for Herman Miller. Professional reupholstery available at pass-thro...

Iconic LCM lounge chair designed by Charles and Ray Eames for Herman Miller. Beautifully bent seat and backrest. Chrome base with shock-mounts in exce...

Second Generation "Ochre" X-base fiberglass arm shell chairs. Charles Eames manufactured by Herman Miller. Nice early versions. Seldom seen light ochre color, retaining original gel ...

Early George Nelson model 5062 X-Leg extension dining table for Herman Miller, 1952. Table has two 12 inch extension leaves and pull-out metal extension tracks. Table is 29 inches...

This is a Swoop Plywood Lounge Chair, designed by Brian Kane for Herman Miller in 2010. The listed price includes one chair, and we have several chairs available for purchase. Their ...

These are Eames Aluminum Group Management Desk Chairs, model EA335, originally designed by Charles and Ray Eames for Herman Miller in 1958. These particular examples date to the 2010...

A wonderful Mid-Century Modern Herman Miller round pedestal table having a white laminate top and trim around the outer edge and supported by a bla...

Gorgeous set of 4 Herman Miller Eames dining chairs. Vintage fiberglass shells are stamped Herman Miller and guaranteed authentic. Surfaces has been custom recoated in vibrant colors...

Wonderful vintage Mid-Century Modern Eames for Herman Miller 60” round tables comprised of light natural oak wood veneer tops, black universal bases, an...

Arthur Umanoff for Howard Miller 1970s wall clock, model #588. Made of a walnut case, original red back, brushed aluminum clock face, brass Roman nu...