Furniture

This is an original Eames Lounge Chair and Ottoman, models 670 and 671, designed by Charles and Ray Eames for Herman Miller in 1956. This set dates to 1962. The shells on this set ar...

These are Eames Aluminum Group Soft Pad Management Desk Chairs, Model EA435, designed by Charles and Ray Eames for Herman Miller in 1969. These examples date to the 2010s. The listed...

We are delighted to offer extremely rare and important pair of fully restored, original, Herman Miller No1 & Herman Miller Hillie circa 1958-1960 black leather and Rosewood lounge armchairs and ottomans These are pretty much the most iconic and well known armchair and ottoman ever made, exhibited countless times, displayed in the V&A, Metropolitan Museum of Art, winners of countless awards these are the simply put the finest suite around They have been on a journey, I’ve had all pieces stripped to the bare shells, the frames have been washed back and traditionally French polished, the leather all restored and hand dyed the original nero black, they are the finest example pair anywhere in the world today One suite has the black Herman Miller No1 label, the other, the earlier redish Herman Miller Hillie label Condition wise, the restoration has been done in such a way to keep all the original charm and patina but make them gallery ready, they will have age and use related patina marks here and there but mostly they are in very fine order Dimensions armchairs Height:- 80.5cm Width:- 85cm Depth:- 86.5cm Seat height:- 41cm Dimensions ottomans Height:- 42cm Width:- 65.5cm Depth:- 53.5cm Please note all measurements are taken at the widest point, MUST READ! The Eames Lounge Chair and ottoman are furnishings made of molded plywood and leather, designed by Charles and Ray Eames for the Herman Miller furniture company. They are officially titled Eames Lounge ( 670 ) and Ottoman ( 671 ) and were released in 1956 after years of development by designers. It was the first chair that the Eameses designed for a high-end market. Examples of these furnishings are part of the permanent collection of New York's Museum of Modern Art. Design Charles and Ray Eames sought to develop furniture that could be mass-produced and affordable, with the exception of the Eames Lounge Chair. This luxury item was inspired by the traditional English club chair. The Eames Lounge Chair is an icon of Modern style design, although when it was first made, Ray Eames remarked in a letter to Charles that the chair looked "comfortable and un-designy". Charles's vision was for a chair with "the warm, receptive look of a well-used first baseman's mitt." The chair is composed of three curved plywood shells covered with veneer: the headrest, the backrest and the seat. The layers are glued together and shaped under heat and pressure. The shells and the seat cushions are essentially of the same shape, and composed of two curved forms interlocking to form a solid mass. The chair back and headrest are identical in proportion, as are the seat and the ottoman. The products have changed in various ways over time. Beginning in 1956 and running through the very early 1990s, the shells were made up of five thin layers of plywood which were covered by a veneer of Brazilian rosewood. The use of Brazilian rosewood was discontinued in the early 1990s, and current production since then consists of seven layers of plywood covered by finishing veneers of cherry, walnut, palisander rosewood (a sustainably grown wood with similar grain patterns to the original Brazilian versions), and other finishes. Small changes include the sets of spacers between the aluminum spines and the wood panels, originally of rubber, later hard plastic washers, and the number of screws securing the armrests, originally three, changed to two in second-series models, while the "domes of silence" (glides/feet) on the chair base originally had thinner screws attaching them to the aluminum base than those on later chairs, and the zipper around the cushions, either brown or black on early models, was later black only. Further, early ottomans had removable rubber slide-on feet with metal glides, and early labels are of oblong foil. History The Eames Lounge Chair first...

This is a ‘DAR’ Armchair, originally designed by Charles and Ray Eames in 1950. This particular chair was produced by Herman Miller in 2016. The listed price includes one DAR cha...

Authentic and rare RAR Rocking chair designed by Ray & Charles Eames for Herman Miller. This rocking chair was manufactured in the 1960s. The rocking chair is in original vintage con...

Arthur Umanoff for Howard Miller 1970s wall clock, model #588. Made of a walnut case, original red back, brushed aluminum clock face, brass Roman nu...

Brian Kane's Swoop Collection for Herman Miller embodies a modern interpretation of midcentury style, particularly showcased through the Swoop Plywood Lounge Chair. Kane meticulously...

Semisfera is a beautiful wall or ceiling light designed by Italian designer Elio Martinelli in the 1970s. The name "Semisfera" means "semi-sphere" in Italian, and the design is inspi...

Snake Floor Lamp is a design object realized by Elio Martinelli, Italy 1960s. Diffused light, swivel arm, white opal methacrylate diffuser, metal str...

Environmental Enrichment Panel by Alexander Girard for Herman Miller "GEOMETRY" Re-relesed in 2000s,, This panel has been dis-continued,, No longer being produced,, Great original condition. Hand delivery avail to New York City or anywhere en route from Buffalo NY Girard Environmental Enrichment...

"La Fonda" Charles Eames & Alexander Girard by Hermann Miller, circa 1960s. Ivory fiberglass shell seat Aluminium base.

This is an Eames Aluminum Group Soft Pad Executive Desk Chair, Model EA437, initially designed by Charles and Ray Eames for Herman Miller in 1969. These are newer examples, dating to...

This is an LCW Lounge Chair, originally designed by Charles and Ray Eames in 1948. It is an early Herman Miller example featuring the 5-2-4 screw pattern, dating it to ca. 1953. The ...

Gorgeous set of 4 Herman Miller Eames dining chairs. Vintage fiberglass shells are stamped Herman Miller and guaranteed authentic. Surfaces has been custom recoated in vibrant colors...

Early ‘RAR’ Rocking Chair, initially designed by Ray and Charles Eames in 1950. This particular chair dates to around 1960s, as determined by the Herman Miller Embossed logo. The des...

This is an ES-108 Three-Seat Teak Sofa, initially designed by Ray and Charles Eames for Herman Miller in 1984. This example dates to the 1990s. Its design consists of a solid aluminu...

A Transitional Charles Eames PAW Shell Swivel Chair w Wood Dowel Legs. In beautiful attractive condition. Red Venice Label attached on underside. Production Date was 1954-1955. Imme...

Bolla wall or ceiling lamp designed by Elio Martinelli for Martinelli Luce in the 60s. The item is in very good vintage condition with minor traces of use.

Pair of George Nelson thin edge chests or nightstands. The items are rosewood veneer with four pull-out drawers and metal legs.

Eames two seat sofa loveseat / love seat for Herman Miller. Early production. Black Leather and solid teak. The Eames sofa is the last piece of furniture produced by the Eames Office...

This striking DAX rope edge fiberglass Zenith shell chair, designed by Charles and Ray Eames for Herman Miller Co., dates back to the 1960s. Featuring a fiberglass shell with origina...

George Nelson for Herman Miller Mid Century Walnut Desk with Return This desk measures: 65 wide x 84.5 deep x 29 high, with a chair clearance of 27.75 inches All pieces of furnitur...

This is an Eames Aluminum Group Management Desk or Side Chair, model EA-108, designed by Charles and Ray Eames for Herman Miller in 1958. These examples were produced in 2012. The li...

This is an original Eames Lounge Chair and Ottoman, models 670 and 671, designed by Charles and Ray Eames in 1956. This set dates to circa 1990 and has Brazilian rosewood shells. The...

This is a Steelframe No. 4000 Series Cabinet, initially designed by George Nelson for Herman Miller in 1950. Its model number is 4033. It features a frame of white powder-coated bent...

These are Eames Time Life Executive Desk Chairs, model 3474 , initially designed in 1961 by Charles and Ray Eames for Herman Miller. The listing price includes one executive chair, a...

The George Nelson-designed round pedestal side table for Herman Miller features a timeless and sleek design. Crafted with meticulous attention to detail, it boasts a circular table s...

Very cool and collectible "Herman Miller" diecast tractor trailer truck toy with original box by Winross USA of Rochester, NY, circa 1980's. This is new old stock and appears to hav...

1980s Postmodern Vertebrae floor lamp by Elio Martinelli Flex floor lamp, also known as Vertebrae, Model 2164 by Elio Martinelli for Martinelli Luce. The lamp is full flexible with swivel shade. Organic shape of the flexible arm is similar to a human spine. First designed for the Turin exhibition 1970. metal base and bracket, "backbone" body movable in both rotation and bending, Condition: Good working order, minor scratches to hood and some cracks (Please see pictures) Given the age, this vintage lamp in good condition, normal usage by age. Normal cap into E27 / Max. 100W. Material: plastic, aluminum, metal and chrome. Marked: Martinelli Luce. Martinelli Flex desk lamp...

Pedestal desk designed in 1955 by George Nelson for Herman Miller, USA. Teak wood top with two drawers underneath and polished aluminium bases.

This is an Eames Aluminum Group Management Desk Chair, model EA335, initially designed by Ray and Charles Eames for Herman Miller in 1958. These examples date to 2012. The listed pri...

Martinelli Luce Serpente table lamp, design Elio Martinelli, 1960s. Painted metal structure and plexiglass lampshade that rotates 3...

Model 660 table lamp designed by Elio Martinelli for Martinelli Luce, 1960s Aluminium, painted metal and plastic. Attribution mark. E27 lamp, good condition, small signs of aging.

This is an Eames Aluminum Group lounge chair, model EA316, originally designed by Charles and Ray Eames for Herman Miller in 1958. These particular examples date to the years 2012 an...

Set of 6 Charles and Ray Eames Fiberglass "LA FONDA" Armchairs, H. Miller This chairs are one of two new fiberglass chairs Charles and Ray Eames designed in 1961, inspired by reque...

This is an original Eames Lounge Chair and Ottoman, models 670 and 671, designed by Charles and Ray Eames for Herman Miller in 1956. This set dates to ca. 1958. The shells on this se...

Fabulous set of eight Mid Century Modern dining chairs by George Nelson for Herman Miller C1960. Two armchairs, 21x 21 x 29.5h x 18.5 seat height, Arms are 25h. Teak wood is in origi...

Tandem Base and Table without shells. Show signs of use. 35 cm H incl the height of the bar of the base/ 40 incl the top of the seat support/ 42 cm incl the top of the table top su...

This fantastic sofa, designed by George Nelson, is an iconic piece of Mid-Century Modern design. Manufactured by Herman Miller in the USA around 1960. The sofa has a two-seater seat...

This is a Herman Miller Action Office II Series roll-top desk, designed by George Nelson in 1965. This example dates to 1975 and is dated as such. The piece features a rich walnut-ve...

Early George Nelson Action Office 1 desk in original condition with minor wear. George Nelson for Herman Miller, polished aluminum, plastic laminate, w...

These authentic Eames for Herman Miller Soft Pad Executive Height office chairs from the Aluminum Group Collection were manufactured in 2001. These executive height chairs feature a ...

For your consideration are a set of 6 Eames side chairs upholstered in gorgeous fabric. Elegance and comfort separates this iconic chair from the rest. The upholstery is in wonderful...

This authentic Eames for Herman Miller Thin Pad Executive Height office chair from the Aluminum Group Collection was manufactured in 2015. This executive height chair features a tall...

Eames Herman Miller EA108 swivel desk chairs, USA 1970s. Two available. Polished aluminium frames, original hopsack upholstery (which is a little tatty but totally useable). Fully st...

Pair of early production Dining Chair Metal DCM designed by the Charles and Ray Eames team . Black wrought iron frames support black aniline dyed wood seats and backs. Finish shows w...

For your consideration, S Chair Vintage modern at its finest iconic S chair designed by Verner Panton for Herman Miller. Designed in 1959. Production 1960s. Unmarked. Note fiberglass...

This is an Eames Aluminum Group Management Chair, Model EA335, initially designed by Ray and Charles Eames in 1969. These examples date to 2015, and the listed price includes one cha...

An Eames LCM lounge chair, Herman Miller, USA, 1950s. Ash plywood, chrome-plated steel and original rubber feet caps. With manufacturers label. ...

Charles and Ray Eames second generation Zenith shell armchair, black enameled metal legs in X-pattern, large shock mounts, pale yellow fibergla...

This rare lounge chair was designed by Charles & Ray Eames and were produced by Herman Miller in the early 1970s. It is one of the earlier lounge chairs which were produced in Europe...

c. 1951. USA. Price is for the set. Contact us if you’d like to purchase a single item. Red dye with wood construction and metal frame.

This is a very rare, early 'RAR' Rocking Chair, initially designed by Ray and Charles Eames in 1950. This particular chair dates to around 1951, as determined by the early Zenith lab...

This is a ‘RAR’ Rocking Chair, designed by Charles & Ray Eames in 1950. This particular chair dates to around 1953. The piece consists of a fiberglass “shell” seat and back, ...

A handsome example of the Billy Wilder chaise lounge by Ray and Charles Eames for Herman Miller. In softpad and high-quality black leather on a eggplant color base. Six cushions conn...

This authentic Eames for Herman Miller Aluminum Group Lounge Chair originally designed in 1958 as part of the Aluminum Group Collection was manufactured in 2005. The unique aluminum ...

A piece of the Eames should not be missing at home or office, and this is a good piece as for a desk as for a dining room, the top is in a good condition as well as the aluminum, it ...

George Nelson for Herman Miller mid-century walnut omni wall unit - 4 bay This wall unit measures: 129.5 wide x 18 deep x 95 inches high. All piec...