Furniture

Mid Century Modern DSS stacking dining side chairs designed by Ray and Charles Eames for Herman Miller circa 1960s. These collectible molded fiberglass shell seats are available in g...

George Nelson for Herman Miller Vintage Action Office Table or Desk The Action Office desk or conference table was designed by American designer and architect George Nelson (1908-1986) for Herman Miller. A substantial piece, It features a beautifully grained walnut top mounted on a streamlined, polished stainless steel base. The desk top edge is trimmed in black rubber. to protect it against bumps and bruises. Two small desk drawers slide out from beneath the table top. The drawers can be removed if desired. The desk top has been recently restored and is in excellent condition. Action Office was originally designed as a set of components that could be combined in multiple ways and changed as needed to evolve with the office over time. George Nelson was one of the founders of American Modernism. From 1946 until 1972, Nelson was director of design at Herman Miller. While there, Nelson introduced several important innovations in office furniture design, such as the Swagged Leg Group, which included the DAF and MAA chairs...

This is an Eames Aluminum Group Soft Pad Executive Desk Chair, Model EA437, initially designed by Charles and Ray Eames for Herman Miller in 1969. These examples date to circa 2010s....

Extremely rare set of four swag legged dining chairs designed in 1958 by George Nelson for Herman Miller. Only produced in fiberglass for a few years, cream colored fiberglass on a s...

George Nelson for Herman Miller Mid Century Walnut Desk with Return This desk measures: 65 wide x 84.5 deep x 29 high, with a chair clearance of 27.75 inches All pieces of furnitur...

Part of the Thin Edge series that George Nelson designed for Herman Miller in the 1950s, this wonderful set comprises two dressers in a tawny walnut on either side of a suspended van...

A wonderful Mid-Century Modern Herman Miller round pedestal table having a white laminate top and trim around the outer edge and supported by a bla...

This is an Equa high back executive office chair designed by Bill Stumpf and Don Chadwick first introduced in the 80's. This chair has an original manufacturer's label from the 90's....

Vintage Time Life Desk Chair ES104 by Charles Eames for Herman Miller. The appears to be a nice early example of the design. Will double check the dimensions of the chair. Wear to t...

Iconic LCM lounge chair designed by Charles and Ray Eames for Herman Miller. Beautifully bent seat and backrest. Chrome base with shock-mounts in exce...

George Nelson rosewood Thin Edge chest or dresser for Herman Miller, U.S.A. Exceptional rosewood grain patterns throughout just ...

This is a Segmented Conference Dining Table, Model ET151, initially designed by Ray and Charles Eames for Herman Miller in 1964. These pieces date to the 1980s. The listed price incl...

Brian Kane's Swoop Collection for Herman Miller embodies a modern interpretation of midcentury style, particularly showcased through the Swoop Plywood Lounge Chair. Kane meticulously...

Designed by George Nelson as model 4620 for Herman Miller's Basic Cabinet Series, this pair of walnut dressers sits on ebonized wood legs. Each...

Very cool versatile original hang-it-all all wall rack, designed by Eames for Herman Miller in solid maple balls and metal enameled finish, very light use great condition.

Early ‘RAR’ Rocking Chair, initially designed by Ray and Charles Eames in 1950. This particular chair dates to around 1960s, as determined by the Herman Miller Embossed logo. The des...

The design of the Aluminum group chairs came from Girard's lament to Charles Eames that there was no well designed outdoor furniture when he was working with Eero Saarinen on the cre...

Rarely seen modernist action office desk or conference table by George Nelson for Herman Miller. Purchased from prominent Buffalo NY architect. Beautiful figured walnut wood top mino...

Stately, minimal but certainly not understated. This 90's produced pair of LCW chairs by Charles and Ray Eames for Herman Miller has been reimaged in matte black; offered for your consideration as a limited custom release from ABT Modern. From the first of the plywood series, the abbreviated Eames LCW Chair was the Lounge Height (L) Side Chair (C) on Wood (W) Base. Designed by Charles Eames and first manufactured by the Evans Molded Plywood Division, the chair has long gained classic status. The techniques used to make these unique chairs had been developed during the war years and was evident in the Eames Splint, made for and utilized by the US Navy. The Eames LCW Plywood Chair...

c. 1960s. USA. Reupholstered in Kvadrat felt wool. Drafting stool.

A piece of the Eames should not be missing at home or office, and this is a good piece as for a desk as for a dining room, the top is in a good condition as well as the aluminum, it ...

c. 1980s. Original green upholstery. We have eight available

George Nelson Thin Edge Group eight drawer dresser for Herman Miller. Made with high quality construction and detail in Brazilian rosewood and oak with drawer dividers to help with ...

Verner Panton "Panton chair" original edition Herman Miller in enamelled fiberglass circa 1960 wear and minor losses.

Slat platform bench designed by George Nelson for Herman Miller, marked underneath.

Modular 3-seater sofa designed by George Miller in 1956. The sofa incorporates a system of modules that allows you to choose the seating arrangement, the coffee table and chest of dr...

Mid-Century Modern George Nelson Sofa with Integrated Side Tables for Herman Miller – This exquisite vintage piece, dating back to the 1950s-1960s, epitomizes the functional elegance...

A rare American Mid-Century Modern headboard for a double (full) size bed with storage and adjustable backrests by important Modernist architect and designer George Nelson (American, 1908-1986) for Herman Miller, circa 1950, model 4647 from the Primavera Collection, walnut, tufted vinyl, ebonized feet. Dimensions: (approx) 40" High, 56.25" Wide, 12" Deep A superb example, in excellent original vintage condition, having a pair tufted vinyl doors that slide down to reveal individual storage compartments. Walnut veneer in excellent condition with one small (.75") stable bubble beneath the surface at top (no splitting or discoloration present). Bed retains both brackets and anchor pins...

We have eleven original 1960s Eames fiberglass shell chairs with original H bases. Narrow mount. Lovely rich brown color. These have their original finish and are gorgeous, gleaming,...

American mid-century modern wood laminate desk George Nelson Herman Miller 1960s Desk or writing desk in wood and metal. The top is in white laminate, with a smaller upper top suppor...

For your consideration, S Chair Vintage modern at its finest iconic S chair designed by Verner Panton for Herman Miller. Designed in 1959. Production 1960s. Unmarked. Note fiberglass...

Introduced in 1946, the slat platform bench was one of Nelson's first designs for Herman Miller after becoming their design director. Intended to serve as a table, a seat, or a base ...

Eames two seat sofa loveseat / love seat for Herman Miller. Early production. Black Leather and solid teak. The Eames sofa is the last piece of furniture produced by the Eames Office...

This is an original Eames Lounge Chair and Ottoman, model 670 and 671, designed by Charles and Ray Eames for Herman Miller in 1956. This set dates to 1964, per its label. The shells ...

This is an ES-108 Three-Seat Walnut Sofa, initially designed by Ray and Charles Eames for Herman Miller in 1984. This example dates to the 1990s. Its design consists of a solid alumi...

An American Midcentury-Modern classic. This slatted bench was designed by George Nelson for Herman Miller. It comprised of maple with ebonized legs. A design of balance, symmetry, an...

1st generation LCW lounge chair designed by Charles and Ray Eames Produced by Evans Plywood Products circa 1948-49 Molded Ash plywood in black finish Remarkable condition with 5-2-5...

This is an Eames Aluminum Group Management Chair, Model EA335, originally designed by Charles and Ray Eames for Herman Miller in 1958. These particular examples were produced in the ...

Early pair of Charles Eames fiberglass arm shell chairs "Crimson" orange, Herman Miller. Nice original condition, retains original gel...

We are delighted to offer for sale extremely rare and important lightly restored, original, Herman Miller No1 1960's black leather and Rosewood lounge armchair and ottoman This is...

Rare and early mid century "DCW" wooden chair in molded walnut plywood by Charles & Ray Eames produced by Herman Miller USA, 1950s. In good original condition with patina from age an...

This is an Eames Aluminum Group Management Desk Chair, model EA335, originally designed by Charles and Ray Eames for Herman Miller in 1958. These particular examples date to 2007. Th...

Clean Lined Art Deco Bookcase, designed by Gilbert Rohde for Herman Miller, American, circa 1930s. Part of Rohde's modular East Indian Laurel Group. This piece is currently being ref...

Classic Herman Miller Eames DCM dining chair. Ebonized molded wood seat and back, supported by chrome steel rod frame. All screws and self leve...

Mid-Century Lounge Chair and Ottoman by Charles & Ray Eames for Herman Miller for ICF

This is an original Eames Lounge Chair and Ottoman, models 670 and 671, designed by Charles and Ray Eames for Herman Miller in 1956. This set dates to ca. 1958. The shells on this se...

This is a Steel Frame No 4000 Series Dresser, initially designed by George Nelson for Herman Miller in 1954. Its model number is 4013. It features a frame of white powder-coated bent...

This is an original Eames Lounge Chair and Ottoman, models 670 and 671, designed by Charles and Ray Eames for Herman Miller in 1956. This set dates to 1962. The shells on this set ar...

These are Eames Aluminum Group Soft Pad Executive Desk Chairs, Model EA437, initially designed by Charles and Ray Eames for Herman Miller in 1969. These pieces are newer examples, da...

We are delighted to offer extremely rare and important pair of fully restored, original, Herman Miller No1 & Herman Miller Hillie circa 1958-1960 black leather and Rosewood lounge armchairs and ottomans These are pretty much the most iconic and well known armchair and ottoman ever made, exhibited countless times, displayed in the V&A, Metropolitan Museum of Art, winners of countless awards these are the simply put the finest suite around They have been on a journey, I’ve had all pieces stripped to the bare shells, the frames have been washed back and traditionally French polished, the leather all restored and hand dyed the original nero black, they are the finest example pair anywhere in the world today One suite has the black Herman Miller No1 label, the other, the earlier redish Herman Miller Hillie label Condition wise, the restoration has been done in such a way to keep all the original charm and patina but make them gallery ready, they will have age and use related patina marks here and there but mostly they are in very fine order Dimensions armchairs Height:- 80.5cm Width:- 85cm Depth:- 86.5cm Seat height:- 41cm Dimensions ottomans Height:- 42cm Width:- 65.5cm Depth:- 53.5cm Please note all measurements are taken at the widest point, MUST READ! The Eames Lounge Chair and ottoman are furnishings made of molded plywood and leather, designed by Charles and Ray Eames for the Herman Miller furniture company. They are officially titled Eames Lounge ( 670 ) and Ottoman ( 671 ) and were released in 1956 after years of development by designers. It was the first chair that the Eameses designed for a high-end market. Examples of these furnishings are part of the permanent collection of New York's Museum of Modern Art. Design Charles and Ray Eames sought to develop furniture that could be mass-produced and affordable, with the exception of the Eames Lounge Chair. This luxury item was inspired by the traditional English club chair. The Eames Lounge Chair is an icon of Modern style design, although when it was first made, Ray Eames remarked in a letter to Charles that the chair looked "comfortable and un-designy". Charles's vision was for a chair with "the warm, receptive look of a well-used first baseman's mitt." The chair is composed of three curved plywood shells covered with veneer: the headrest, the backrest and the seat. The layers are glued together and shaped under heat and pressure. The shells and the seat cushions are essentially of the same shape, and composed of two curved forms interlocking to form a solid mass. The chair back and headrest are identical in proportion, as are the seat and the ottoman. The products have changed in various ways over time. Beginning in 1956 and running through the very early 1990s, the shells were made up of five thin layers of plywood which were covered by a veneer of Brazilian rosewood. The use of Brazilian rosewood was discontinued in the early 1990s, and current production since then consists of seven layers of plywood covered by finishing veneers of cherry, walnut, palisander rosewood (a sustainably grown wood with similar grain patterns to the original Brazilian versions), and other finishes. Small changes include the sets of spacers between the aluminum spines and the wood panels, originally of rubber, later hard plastic washers, and the number of screws securing the armrests, originally three, changed to two in second-series models, while the "domes of silence" (glides/feet) on the chair base originally had thinner screws attaching them to the aluminum base than those on later chairs, and the zipper around the cushions, either brown or black on early models, was later black only. Further, early ottomans had removable rubber slide-on feet with metal glides, and early labels are of oblong foil. History The Eames Lounge Chair first...

The DAX chair combines the shell of the 'Eames armchairs' with a classic four-legged base and is thus a realisation of the chair concept created by Charles and Ray Eames in the 1950s. Thanks to its relatively simple appearance, the dax chair is undoubtedly the most versatile of Eames plastic chairs...

Charles and Ray Eames for Herman Miller DKR wire chairs on Eiffel tower bases. All four chairs have been refinished in a correct tone matte black powder...

This is an Eames Aluminum Group Soft Pad Executive Chair, Model EA437, initially designed by Charles and Ray Eames for Herman Miller in 1968. These examples date to 2002. The listed ...

This is an Eames Aluminum Group Soft Pad Management Chairs, Model EA435, originally designed by Charles and Ray Eames for Herman Miller in 1969. These examples date to the year 1989....

This is a very rare, early 'RAR' Rocking Chair, initially designed by Ray and Charles Eames in 1950. This particular chair dates to around 1951, as determined by the early Zenith lab...

This is a single (multiple chairs are available, though sold individually) Eames Aluminum Group Management Desk Chair, designed by Charles and Ray Eames for Herman Miller in 1958. Th...

Set of 4 classic chairs the "La Fonda" designed by Charles and Ray Eames in 1961 for the La Fonda del Sol restaurant in New York and produced by Herman Miller. All the chairs are ori...

A rare birch dining or desk chair by Ernest Farmer of George Nelson and Associates for Herman Miller. Professional reupholstery available at pass-thro...