Furniture

This is a single (multiple chairs are available, though sold individually) Eames Aluminum Group Management Desk Chair, designed by Charles and Ray Eames for Herman Miller in 1958. Th...

This is an original Eames Lounge Chair and Ottoman, model 670 and 671, designed by Charles and Ray Eames for Herman Miller in 1956. This set dates to 1964, per its label. The shells ...

Leather chair with aluminum base and wheels. Stamped Herman Miller under the seat. The chair turns on itself and reclines. Seat height: 52 cm. Wear due to time and age. For shipping...

George Nelson rosewood Thin Edge chest or dresser for Herman Miller, U.S.A. Exceptional rosewood grain patterns throughout just ...

Verner Panton "Panton chair" original edition Herman Miller in enamelled fiberglass circa 1960 wear and minor losses.

Caper stacking chair Designed by Jeff Weber for Herman Miller Caper’s polypropylene backrest is contoured to fit your back and perforated with holes to al...

This exemplary Charles and Ray Eames for Herman Miller 'Tandem' seating system was designed in 1962, originally for Chicago O'Hare airport and then adopted by many other airports and...

These are Eames Aluminum Group Management Desk Chairs, model EA335, originally designed by Charles and Ray Eames for Herman Miller in 1958. These particular examples date to 2013. Th...

The Aluminum Group Management height office chair designed by Charles & Ray Eames for Herman Miller is from the Eames Aluminum Group Collection. These distinctive chairs resulted fro...

Iconic Jugendstil armchair, Model No. 714, designed by Otto Wagner and produced by Jacob & Josef Kohn. Made of mahogany stained beechwood and shellac hand polished, lending that air ...

This is an Eames Aluminum Group Management Desk Chair, model EA335, originally designed by Charles and Ray Eames for Herman Miller in 1958. These particular examples date to 2007. Th...

These model 719 armchairs designed by Koloman Moser for the firm Jacob & Jjosef Kohn in 1902 , their dimensions are H 86 cm., width 53 cm., depth 52 cm. and seat height 44 cm. (with...

Secession armchair by Josef Hoffmann professionally stained and repolished. Signed J&J Kohn Teschen Austria.

Very Rare and highly collectible original vintage George Nelson for Herman Miller rolltop "Action Desk". These early productions of these Herman Miller products hold more value than the more modern productions. This desk is beautiful from all angles. It is a brutalist, post modern, collectible work of art. Measures: Height: 34 inches Width: 54 inches Depth: 30 inches. Note: We do have the Herman Miller Aluminum Group desk chair...

This is an Eames Aluminum Group Management Desk Chair, model EA335, initially designed by Ray and Charles Eames for Herman Miller in 1958. These examples date to 2012. The listed pri...

Awesome example of the Charles and Ray Eames DAX fiberglass arm shell chair for Herman Miller. It is in elephant hide gray with a black H base and unusual glide feet. It retains a pa...

This is an ES-108 Three-Seat Teak Sofa, initially designed by Ray and Charles Eames for Herman Miller in 1984. This example dates to the 1990s. Its design consists of a solid aluminu...

This is an Eames Aluminum Group Soft Pad Executive Desk Chair, Model EA437, initially designed by Charles and Ray Eames for Herman Miller in 1969. These are newer examples, dating to...

Set of 4 classic chairs the "La Fonda" designed by Charles and Ray Eames in 1961 for the La Fonda del Sol restaurant in New York and produced by Herman Miller. All the chairs are ori...

This is an original Eames Lounge Chair and Ottoman, models 670 and 671, designed by Charles and Ray Eames for Herman Miller in 1956. This set dates to 1962. The shells on this set ar...

This is an Eames Aluminum Group Management Desk or Side Chair, model EA-108, designed by Charles and Ray Eames for Herman Miller in 1958. These examples were produced in 2012. The li...

These are Eames Aluminum Group Soft Pad Management Desk Chairs, Model EA435, designed by Charles and Ray Eames for Herman Miller in 1969. These examples date to the 2010s. The listed...

Mid-Century Modern Herman Miller thin edge eight-drawer chest designed by George Nelson design. Thin edge figured rosewood case. Sculptural aluminum legs. White stylized porcelain dr...

This authentic Eames for Herman Miller Soft Pad Executive Height office chair from the Aluminum Group Collection was manufactured in the 2000s. This classic mid century modern office...

Classic pair of Mid-Century Modern padded arm shell chairs,Designed by Charles and Ray Eames, for Herman Miller. Beautiful two-tone, chairs are in really ni...

Gorgeous early Eames for Herman Miller fiberglass chair LAX (Low Armchair on X Base) having large shock mounts and flat edge shell. All origina...

This is a Steel Frame No 4000 Series Dresser, initially designed by George Nelson for Herman Miller in 1954. Its model number is 4013. It features a frame of white powder-coated bent...

Pedestal desk designed in 1955 by George Nelson for Herman Miller, USA. Teak wood top with two drawers underneath and polished aluminium bases.

The celebrated portfolio of Charles and Ray Eames continues to inspire designers to this day. Early in their mission to create furniture for the masses, the Eameses explored innovati...

This is an LCW Lounge Chair, originally designed by Charles and Ray Eames in 1948. It is an early Herman Miller example featuring the 5-2-4 screw pattern, dating it to ca. 1953. The ...

George Nelson for Herman Miller Steel Frame Occasional Table on Wheels (1955) Frame: Black or white enamel with minor chips and scratches (consistent with age/use) Surfaces: Oiled wa...

Attributed to either Josef Hoffmann or Otto Prutscher as both of the designers did similar objects in bentwood at this time, and both were using balls or olives for joining the legs ...

This authentic Eames for Herman Miller Aluminum Group Lounge Chair originally designed in 1958 as part of the Aluminum Group Collection was manufactured in 2005. The unique aluminum ...

Listed for sale is a Herman Miller Eames aluminum group soft pad management desk chair in very dark grey leather (a slight shade lighter than black). Multiple chairs are available, t...

We are delighted to offer extremely rare and important pair of fully restored, original, Herman Miller No1 & Herman Miller Hillie circa 1958-1960 black leather and Rosewood lounge armchairs and ottomans These are pretty much the most iconic and well known armchair and ottoman ever made, exhibited countless times, displayed in the V&A, Metropolitan Museum of Art, winners of countless awards these are the simply put the finest suite around They have been on a journey, I’ve had all pieces stripped to the bare shells, the frames have been washed back and traditionally French polished, the leather all restored and hand dyed the original nero black, they are the finest example pair anywhere in the world today One suite has the black Herman Miller No1 label, the other, the earlier redish Herman Miller Hillie label Condition wise, the restoration has been done in such a way to keep all the original charm and patina but make them gallery ready, they will have age and use related patina marks here and there but mostly they are in very fine order Dimensions armchairs Height:- 80.5cm Width:- 85cm Depth:- 86.5cm Seat height:- 41cm Dimensions ottomans Height:- 42cm Width:- 65.5cm Depth:- 53.5cm Please note all measurements are taken at the widest point, MUST READ! The Eames Lounge Chair and ottoman are furnishings made of molded plywood and leather, designed by Charles and Ray Eames for the Herman Miller furniture company. They are officially titled Eames Lounge ( 670 ) and Ottoman ( 671 ) and were released in 1956 after years of development by designers. It was the first chair that the Eameses designed for a high-end market. Examples of these furnishings are part of the permanent collection of New York's Museum of Modern Art. Design Charles and Ray Eames sought to develop furniture that could be mass-produced and affordable, with the exception of the Eames Lounge Chair. This luxury item was inspired by the traditional English club chair. The Eames Lounge Chair is an icon of Modern style design, although when it was first made, Ray Eames remarked in a letter to Charles that the chair looked "comfortable and un-designy". Charles's vision was for a chair with "the warm, receptive look of a well-used first baseman's mitt." The chair is composed of three curved plywood shells covered with veneer: the headrest, the backrest and the seat. The layers are glued together and shaped under heat and pressure. The shells and the seat cushions are essentially of the same shape, and composed of two curved forms interlocking to form a solid mass. The chair back and headrest are identical in proportion, as are the seat and the ottoman. The products have changed in various ways over time. Beginning in 1956 and running through the very early 1990s, the shells were made up of five thin layers of plywood which were covered by a veneer of Brazilian rosewood. The use of Brazilian rosewood was discontinued in the early 1990s, and current production since then consists of seven layers of plywood covered by finishing veneers of cherry, walnut, palisander rosewood (a sustainably grown wood with similar grain patterns to the original Brazilian versions), and other finishes. Small changes include the sets of spacers between the aluminum spines and the wood panels, originally of rubber, later hard plastic washers, and the number of screws securing the armrests, originally three, changed to two in second-series models, while the "domes of silence" (glides/feet) on the chair base originally had thinner screws attaching them to the aluminum base than those on later chairs, and the zipper around the cushions, either brown or black on early models, was later black only. Further, early ottomans had removable rubber slide-on feet with metal glides, and early labels are of oblong foil. History The Eames Lounge Chair first...

This is a Steelframe No. 4000 Series Cabinet, initially designed by George Nelson for Herman Miller in 1950. Its model number is 4033. It features a frame of white powder-coated bent...

This is an Eames Aluminum Group Soft Pad Management Chair, Model EA148, designed by Charles and Ray Eames for Herman Miller in 1969. This example dates to around 1981. The piece feat...

This is an original Eames Lounge Chair and Ottoman, models 670 and 671, designed by Charles and Ray Eames in 1956. This set dates to circa 1990 and has Brazilian rosewood shells. The...

Gorgeous set of 4 Herman Miller Eames dining chairs. Vintage fiberglass shells are stamped Herman Miller and guaranteed authentic. Surfaces has been custom recoated in vibrant colors...

This special version of the Eames conference table was created for the "executive market" Features recently restored signature chrome segmented base with a Carrera marble racetrac...

Beautiful single original like new condition Eames DCW by Herman Miller, in white ash finish elegant corner dining chair.

A nice pair of rolling office or desk chairs By Herman Miller USA, 2000s A nice pair of rolling office or desk chairs By Herman Miller USA, 2000s Measures: 18" W x 19" D x 3...

Designed as part of the iconic Aluminum Group, this low-back, side chair has the same sophisticated, refined aesthetic with extra padding. This authentic Eames Soft Pad Chair is mad...

Early George Nelson Action Office 1 desk in original condition with minor wear. George Nelson for Herman Miller, polished aluminum, plastic laminate, w...

Stunning and quite rare Gilbert Rohde Art Deco rosewood dressing table, pouf and mirror, purchased recently from an amazing estate, folks originally purchased new from Herman Miller ...

Tandem Base and Table without shells. Show signs of use. 35 cm H incl the height of the bar of the base/ 40 incl the top of the seat support/ 42 cm incl the top of the table top su...

This authentic Eames for Herman Miller Soft Pad Management Height black leather office chair from the Aluminum Group Collection was manufactured in the 2000s. This classic mid century modern office chair was first introduced in 1969 by Charles and Ray Eames as the luxury model of the 1958 Aluminum Group line. This management height chair features black leather upholstery, polished aluminum five-star swivel base, armrests and rolling casters. The comfortable, contoured ergonomic design features thick, plush cushions and a 360 degree smooth swivel seat with manual lift adjustable height and backrest tilt. An iconic and collectible desk chair perfect for home or office. Eames fabric...

Beech bentwood frame with an embossed plywood seat and backrest. First time mentioned in the J. & J. Kohn catalog 1902 with the catalog no. 67. A beautiful original condition. A sui...

Set of 4 DCM Eames for Herman Miller ash plywood molded dining chairs. Vintage DCM Eames chairs are in great overall condition. 19.5" x 18" x 30" x16" "The Eames Molded Plywood Dini...

These are Eames Aluminum Group Management Chairs, originally designed by Charles and Ray Eames for Herman Miller in 1958. These particular examples were produced in 2009. Their desig...

Rare Mid-Century Modern three seat tandem bench armchair designed by Peter Protzman for Herman Miller. The chair is constructed from flat bar tubular stee...

Art Nouveau Beech and Woven Rocking Chair by Jacob & Josef Kohn. Wax polished. Jacob & Josef Kohn, also known as J. & J. Kohn, was an Austrian furniture maker and interior designer ...

Classic Herman Miller fiberglass diamond chair. Designed by Charles and Ray Eames. circa 1970s production. Model DSX. This shade is called “Brilliant Yellow” and is one of the less c...

A Gilbert Rohde classic nickel plated lounge chair designed for Herman Miller in 1936. Freshly re-upholstered in a thick dark grey boucle and very comfortable. The frame shows it's a...

These are Eames Time Life Executive Desk Chairs, model 3474 , initially designed in 1961 by Charles and Ray Eames for Herman Miller. The listing price includes one executive chair, a...

These are Eames Aluminum Group Management Desk Chairs, Model EA335, designed by Ray and Charles Eames for Herman Miller in 1958. These particular examples were produced in 2014. The ...

American mid-century modern coffee table ETR by Eames for Herman Miller, 1960s Coffee table mod. ETR with oval wooden top covered in black laminate. The elongated top is reminiscent ...

These are Eames Aluminum Group Soft Pad Executive Chairs, Model EA420, designed by Charles and Ray Eames for Herman Miller in 1969. These examples date to circa 1975. The listed pric...