Skip to main content
Video Loading
Want more images or videos?
Request additional images or videos from the seller
1 of 10

Eames Ctw Coffee Table in Beech for Herman Miller, circa 1950

$2,396List Price

More From This Seller

View All
La Fonda coffee table by Alexander Girard for Herman Miller
By Herman Miller, Charles Eames
Located in San Diego, CA
La Fonda coffee or large end table designed by Charles and Ray Eames and manufactured by Herman Miller. This series was designed for the La Fonda restaurant, designed by Alexander Gi...
Category

Vintage 1960s American Mid-Century Modern Coffee and Cocktail Tables

Materials

Slate, Chrome

Early Eames LAR Fiberglass Armshell Lounge Chair for Herman Miller pair avaiable
By Charles and Ray Eames, Herman Miller
Located in San Diego, CA
Rare Eames LAR chairs for Herman Miller. Parchment molded fiberglass LAR chair designed by Charles and Ray Eames for Herman Miller. On wire "cat's cradle" base. This example dates to circa 1954 and was in production as one of the five introductory base styles when the fiberglass shells were introduced in 1950. It does not have a rope edge, which pushes in slightly later into the 1950s. One chair with early Orange Herman Miller label. The other chair without a label. Shells are clean but show some patina as does the base. Shock mounts look to be original and in good working order. These chairs have continued to become more and more difficult to find. Condition on this example is very good with some wear as to be expected. Dimensions: 25" L x 24" D x 24.5"H, Seat Height: 11.5" The Eames LAR Cats Cradle Chair or abbreviated Low (L) Height, Arm (A) Chair on Rod (R) Base was one of the ‘original 5’ of base types the fiberglass shell chairs were released with, in 1950. Essentially designed as a lounge height chair, the LAR base developed the popular common name ‘Cats Cradle’ and remains a favorite with collectors today. The Eames LAR Chair was certainly a masterful design, different from any of the other options of the ‘original 5’ and providing a third lounge option for the plastic chair series along with the RAR and LAX (DAX Variant). It was also quite a contrast to the stark and traditional typical seating designs of the 1940’s and 1950’s. The rod wire base was bent into shape to provide two horizontal struts to connect with the floor and give the almost triangular visual. The original 5 bases released in the 1950 first generation included the rocking RAR, the Eiffel DAR, the dowel leg DAW and four legged DAX along with the LAR. The Eames Cats...
Category

Vintage 1950s American Mid-Century Modern Chairs

Materials

Metal

Hans J. Wegner for Andreas Tuck teak coffee table model AT-10
By Hans J. Wegner, Andreas Tuck Møbelfabrik
Located in San Diego, CA
Hans J. Wegner for Andreas Tuck Teak Coffee Table – Model AT-10 Denmark, 1950s * We have highly competitive prices for international shipping. Contact us for a quote on this or any o...
Category

Vintage 1950s Danish Scandinavian Modern Coffee and Cocktail Tables

Materials

Cane, Teak

George Nelson Basic Series Dresser for Herman Miller in white and walnut.
By George Nelson
Located in San Diego, CA
Beautiful White and Walnut Chest of Drawers by George Nelson for Herman Miller. This dresser is from the Basic series with its iconic black lacquer wood legs, beautiful walnut case a...
Category

Vintage 1950s American Mid-Century Modern Dressers

Materials

Metal

Peter Hvidt and Orla Mølgaard-Nielsen Round Solid Teak Coffee Table Denmark, 19
By Hvidt & Mølgaard
Located in San Diego, CA
Elevate your living space with this exceptional Mid-Century Modern round coffee table by Peter Hvidt and Orla Mølgaard-Nielsen, crafted in Denmark during the 1950s. A celebrated design duo, Hvidt & Mølgaard were known for their refined forms and architectural approach to furniture, and this piece exemplifies their timeless aesthetic. This piece is an incredible piece that will work in many design styles. Solid Teak Construction: The table's richly grained solid teak top showcases the natural beauty of Danish hardwoods, offering warmth and durability that only improves with age. Brass Suspension Details: Elegant brass rod accents connect the sculptural lower shelf, adding a refined contrast to the wood while nodding to Danish Modern craftsmanship. Woven Cane Shelf: A circular lower tier wrapped in woven cane adds function and visual lightness—perfect for storing magazines or showcasing curated objects. Tapered Legs: Classic conical legs give the table an airy, floating appearance, characteristic of Scandinavian design. Dimensions: Dimensions: 39" Diameter x 16" Height Condition: Expertly restored by Hobbs...
Category

Vintage 1950s Danish Scandinavian Modern Coffee and Cocktail Tables

Materials

Brass

George Nelson Rosewood Thin Edge 4 drawer Dresser by Herman Miller #1
By George Nelson
Located in San Diego, CA
A rosewood Thin Edge dresser designed by George Nelson for Herman Miller with exquisite rosewood grain and early original white porcelain handles.  The George Nelson Rosewood Thin Edge 4-drawer Dresser, crafted by Herman Miller, epitomizes the timeless elegance and functional sophistication synonymous with mid-century modern design. This dresser stands as an iconic piece within the George Nelson collection, renowned for its clean lines, minimalist aesthetic, and impeccable craftsmanship. This particular example boasts exquisite rosewood grain and early original white porcelain handles. Constructed from rich rosewood veneer, the dresser boasts a warm, organic hue that exudes luxury and refinement. Its slender profile and thin edges create an illusion of lightness, enhancing the overall sense of modernity and grace. The 4 spacious drawers feature seamless integration of hardware, maintaining the dresser's sleek appearance while providing ample storage space for clothing, linens, or personal belongings. Each detail of the George Nelson Rosewood Thin Edge series reflects an unwavering commitment to both form and function. Its timeless design transcends trends, making it a versatile addition to any interior decor scheme, from minamalist to post-modern. Whether used in a bedroom, living area, or office space, this dresser elevates the ambiance with its understated elegance and unparalleled craftsmanship, showcasing the enduring legacy of George Nelson's visionary design ethos. About the Designer: Not everyone thinks of George Nelson when they think “Modernism”—but they should. Here’s why: Looking at the outset of George Nelson’s career, few would have guessed that his legacy would crown him as one of the most influential individuals in Modernism—story has it that the young Ivy Leaguer stumbled into the Yale School of Architecture seeking shelter from the rain, and only then did he consider studying design. His legacy, though, would be one that touched nearly every corner of American Modernism as we think of it today. As an architect, author, furniture designer, graphic designer, exhibition designer, teacher, amateur photographer, and general provocateur, George Nelson shaped the course of design in America for over four decades. After completing his two Bachelor’s degrees (one in architecture, the other in fine arts), Nelson went on to accept a traveling fellowship in Rome, which interfaced him with figures like Ludwig Mies Van Der Rohe, Walter Gropius, Le Corbusier, and Gio Ponti all of which he interviewed forPencil Point, bringing the European vanguard to the attention of the magazine’s American readership. At this point in his career, Nelson had devoted himself to writing, joining Architectural Forum as its first associate editor in 1935. For nearly a decade, Nelson’s post as an editor brought him face-to-face with many of the leaders of the Modernism movement in the U.S., and through these exchanges, his own stance in the design world began to solidify. For Nelson, the purpose of design was to improve the world in accordance with the laws of nature—and while he hadn’t yet done much designing himself, he was busy teasing out the theoretical details of architecture. In 1940, Nelson co-authored Tomorrow’s House with Henry Wright, and the book went on to be a great commercial success, introducing concepts like the “family room,” and more broadly assuming a solutions-based perspective for architectural design. It wasn’t long before the book earned him the favorable attention of D.J. Depree, the chairman of Herman Miller the American furniture manufacture. Despite Nelson’s inexperience in furniture design, Depree saw potential in the writer’s approach to the industry: solutions-oriented design with a practical lean. Nelson became the company’s Director of Design in 1947, under the condition that he be allowed to continue his work outside of the company.  From 1947 to 1972, Nelson oversaw the design department at Herman Miller, bringing in the icons that would shape some of the most memorable pieces of mid-century design, from such people as Ray and Charles Eames and Harry Bertoia to Richard Schultz, Donald Knorr, and Isamu Noguchi. 

Beginning in the mid-1950s, Nelson’s own design firm began its work in earnest, producing furniture and pioneering a ubiquitous incorporation of design, bringing that same consideration for pragmatism and aesthetics to advertising and marketing materials, image management, and graphic programs. His own firm incorporated in 1955, tapping many of the same designers from the Herman Miller roster for collaborations under George Nelson Associates, Inc. It was during this period of Nelson’s life and career that many of his most iconic designs came onto the scene—many will be instantly familiar furniture silhouettes that perhaps you didn’t know sprung from George Nelson himself.  Designing his first collection in 1945 and appointed design director in 1947, Nelson quickly expanded his purview and transformed the company. Confirming De Pree’s early assessment of Nelson as someone “thinking well ahead of the parade,” he redesigned everything from Herman Miller’s product line to its graphics and marketing and advertising materials. Over the course of his long association with Herman Miller, Nelson designed hundreds of pieces of furniture and recruited other designers, including Charles and Ray Eames, Alexander Girard, and Isamu Noguchi, now all widely acknowledged as some of the brightest talents of the time. Nelson developed his own designs—from furniture to architecture, and exhibitions to graphics—in his New York City studio, known variously over the years as George Nelson, George Nelson & Associates, and George Nelson and Company. The staff included significant designers in their own right such as Irving Harper, George Mulhauser, Ernest Farmer, Gordon Chadwick, George Tscherny...
Category

Vintage 1950s American Mid-Century Modern Dressers

Materials

Aluminum

You May Also Like

Eames CTW-3 Coffee Table by Herman Miller
By Charles and Ray Eames, Herman Miller
Located in Highland, IN
This early vintage coffee table by Charles and Ray Eames is an important and iconic design. The result of the couple's experiments in molded plywood, the table is visually and physic...
Category

Vintage 1950s American Mid-Century Modern Coffee and Cocktail Tables

Materials

Ash

691 coffee table by Eames for Herman Miller, USA 1950s
By Herman Miller, Charles and Ray Eames
Located in ECHT, NL
Eames 691 coffee table by Herman Miller, USA 1958 Mid century design coffee or side table. Designed in the 1950s by Ray and Charles Eames and produced by Herman Miller in the 1970s. ...
Category

Mid-20th Century American Mid-Century Modern Coffee and Cocktail Tables

Materials

Aluminum

Herman Miller for Eames Surfboard Table
By Herman Miller, Charles and Ray Eames
Located in Brooklyn, NY
Mid-Century Modern black top coffee table with Eiffel metal base. (Please confirm item location - NY or NJ - with dealer).  
Category

20th Century Mid-Century Modern Coffee and Cocktail Tables

Materials

Leather

C. 1947 Eames Evans Herman Miller CTW Round Wood Coffee Table in Walnut
By Herman Miller, Charles and Ray Eames
Located in Philadelphia, PA
This is a CTW Coffee Table, initially designed by Ray and Charles Eames for the Evans Molded Plywood Company in 1946. It was released as a part of the "Plywood Group" for the Eames O...
Category

Vintage 1940s American Modern Coffee and Cocktail Tables

Materials

Plywood

Charles and Ray Eames CTW 'Coffee Table Wood' for Herman Miller
By Herman Miller, Charles Eames
Located in Saint Louis, MO
Eames for Herman Miller Coffee Table ("CTW"). Iconic Mid-Century Modern designer coffee table bearing "Eames Herman Miller" label. Excellent figuring in the birch wood grain. Bentwoo...
Category

Early 2000s American Mid-Century Modern Coffee and Cocktail Tables

Materials

Birch, Bentwood

Eames for Herman Miller stone top 36” Coffee Table/ Early Production!
By Charles and Ray Eames, Herman Miller
Located in Philadelphia, PA
Early Eames Aluminum Group Marble 36" Round Coffee Table. Stone sits on a metal support system that was only used briefly, or possibly pre-production. Table is in very nice shape w...
Category

Vintage 1960s American Mid-Century Modern Coffee and Cocktail Tables

Materials

Marble, Metal, Aluminum

Recently Viewed

View All