Furniture

A stylish Mid-Century Modern coffee table By George Nelson for Herman Miller USA, 1950s White laminate top, with walnut trim, and brass finished steel hairpin legs. Measures: 28....

Pair of Stacking Chairs by Mark Goetz for Herman Miller

DKR-2 chair by Charles and Ray Eames for Herman Miller, also referred to as the bikini chair features a white Naugahyde seat cushion and seat back resembling a bikini. The chair has ...

Charles Eames DCM dining chair with seat and back of molded walnut veneer, chromed steel. Designed by Charles and Ray Eames in 1946. Produced by Herma...

Yellow & black steel frame desk Model 4111 by George Nelson Herman Miller Mint.

Environmental Enrichment Panel by Alexander Girard for Herman Miller "GEOMETRY" Re-relesed in 2000s,, This panel has been dis-continued,, No longer being produced,, Great original condition. Hand delivery avail to New York City or anywhere en route from Buffalo NY Girard Environmental Enrichment...

Verner Panton "Panton chair" original edition Herman Miller in enamelled fiberglass circa 1960 wear and minor losses.

This is an ES-108 Three-Seat Walnut Sofa, initially designed by Ray and Charles Eames for Herman Miller in 1984. This example dates to the 1990s. Its design consists of a solid alumi...

Stunning and quite rare Gilbert Rohde Art Deco rosewood dressing table, pouf and mirror, purchased recently from an amazing estate, folks originally purchased new from Herman Miller ...

This is an original Eames Lounge Chair and Ottoman, model 670 and 671, designed by Charles and Ray Eames for Herman Miller in 1956. This set dates to 1964, per its label. The shells ...

This is a single (multiple chairs are available, though sold individually) Eames Aluminum Group Management Desk Chair, designed by Charles and Ray Eames for Herman Miller in 1958. Th...

We recently acquired a set of George Nelson Rosewood Thin Edge chests out of an estate. They are vintage 1970’s and still each retain the Herman Miller Label. Please see our other li...

This is an Eames Aluminum Group Soft Pad Executive Desk Chair, Model EA437, initially designed by Charles and Ray Eames for Herman Miller in 1969. These examples date to circa 2010s....

These are Eames Aluminum Group Management Desk Chairs, model EA335, originally designed by Charles and Ray Eames for Herman Miller in 1958. These particular examples date to 2013. Th...

We have eleven original 1960s Eames fiberglass shell chairs with original H bases. Narrow mount. Lovely rich brown color. These have their original finish and are gorgeous, gleaming,...

Arthur Umanoff for Howard Miller 1970s wall clock, model #588. Made of a walnut case, original red back, brushed aluminum clock face, brass Roman nu...

1 Herman Miller Eames 42" aluminum group table. Charles Eames was born in St. Louis, Missouri in 1907. Ray Kaiser Eames was born in Sacramento, California ...

This is an Eames Aluminum Group Management Desk Chair, model EA335, originally designed by Charles and Ray Eames for Herman Miller in 1958. These particular examples date to 2007. Th...

A rare Rosewood Thin Edge credenza/cabinet designed by George Nelson, Produced by Herman Miller in 1950s, with 5 drawers (1 hidden behind the door) and two shelves. Applied foil manu...

Pair of Herman Miller produced original Eames Molded Shell Chair in a durable, 100 percent recyclable polypropylene. The subtle matte texture of the re-engineered plastic shell maint...

Early and original Eames DCW chair manufactured by Herman Miller. Executed in Calico Ash. All original shock mounts. 5-2-4 screw pattern under the chair indicates this is a 1950s Her...

We are delighted to offer for sale extremely rare and important lightly restored, original, Herman Miller No1 1960's black leather and Rosewood lounge armchair and ottoman This is...

This iconic circular white 5452 pedestal coffee or side table was designed by George Nelson and made by Herman Miller, USA 1960s. It features a White laminate top and enameled steel...

These are Eames Aluminum Group Soft Pad Management Desk Chairs, Model EA435, designed by Charles and Ray Eames for Herman Miller in 1969. These examples date to the 2010s. The listed...

This is an Eames Aluminum Group Management Desk or Side Chair, model EA-108, designed by Charles and Ray Eames for Herman Miller in 1958. These examples were produced in 2012. The li...

This is a Swoop Plywood Lounge Chair, designed by Brian Kane for Herman Miller in 2010. The listed price includes one chair, and we have several chairs available for purchase. Their ...

This is an original Eames Lounge Chair and Ottoman, models 670 and 671, designed by Charles and Ray Eames for Herman Miller in 1956. This set dates to 1962. The shells on this set ar...

This is an Eames Aluminum Group Soft Pad Executive Desk Chair, Model EA437, initially designed by Charles and Ray Eames for Herman Miller in 1969. These are newer examples, dating to...

An all original George Nelson small dresser. In good vintage condition with sign of age and use. Minor chipping of painted drawer fronts, loss of paint, oxidation to frame. Herma...

A fabulous Charles & Ray Eames transitional armchair produced by Herman Miller with Zenith Plastics. The salmon colored LAX chair features a rope edge, X base, large shock mounts, bo...

Very Rare and highly collectible original vintage George Nelson for Herman Miller rolltop "Action Desk". These early productions of these Herman Miller products hold more value than the more modern productions. This desk is beautiful from all angles. It is a brutalist, post modern, collectible work of art. Measures: Height: 34 inches Width: 54 inches Depth: 30 inches. Note: We do have the Herman Miller Aluminum Group desk chair...

Eames executive chair ES-104, also known as the Time-Life chair, an iconic piece of mid-century design by Charles and Ray Eames. This chair was originally crafted for the executive f...

Iconic functionality of American Mid-Century Modern design with this classic pedestal table designed by the legendary Ray and Charles Eames for Herman Miller. Developed for their ti...

George Nelson for Herman Miller Steel Frame Occasional Table on Wheels (1955) Frame: Black or white enamel with minor chips and scratches (consistent with age/use) Surfaces: Oiled wa...

This is an original Eames Lounge Chair and Ottoman, models 670 and 671, designed by Charles and Ray Eames in 1956. This set dates to circa 1990 and has Brazilian rosewood shells. The...

Mid-Century Lounge Chair and Ottoman by Charles & Ray Eames for Herman Miller for ICF

This is an Eames Aluminum Group Management Desk Chair, model EA335, initially designed by Ray and Charles Eames for Herman Miller in 1958. These examples date to 2012. The listed pri...

Rare early swiveling dowel leg chair with walnut legs, designed by Charles & Ray Eames for Herman Miller, model DKW-1, 1951/1952. Wire top and timeworn weaved fabric seat. Original t...

We are delighted to offer extremely rare and important pair of fully restored, original, Herman Miller No1 & Herman Miller Hillie circa 1958-1960 black leather and Rosewood lounge armchairs and ottomans These are pretty much the most iconic and well known armchair and ottoman ever made, exhibited countless times, displayed in the V&A, Metropolitan Museum of Art, winners of countless awards these are the simply put the finest suite around They have been on a journey, I’ve had all pieces stripped to the bare shells, the frames have been washed back and traditionally French polished, the leather all restored and hand dyed the original nero black, they are the finest example pair anywhere in the world today One suite has the black Herman Miller No1 label, the other, the earlier redish Herman Miller Hillie label Condition wise, the restoration has been done in such a way to keep all the original charm and patina but make them gallery ready, they will have age and use related patina marks here and there but mostly they are in very fine order Dimensions armchairs Height:- 80.5cm Width:- 85cm Depth:- 86.5cm Seat height:- 41cm Dimensions ottomans Height:- 42cm Width:- 65.5cm Depth:- 53.5cm Please note all measurements are taken at the widest point, MUST READ! The Eames Lounge Chair and ottoman are furnishings made of molded plywood and leather, designed by Charles and Ray Eames for the Herman Miller furniture company. They are officially titled Eames Lounge ( 670 ) and Ottoman ( 671 ) and were released in 1956 after years of development by designers. It was the first chair that the Eameses designed for a high-end market. Examples of these furnishings are part of the permanent collection of New York's Museum of Modern Art. Design Charles and Ray Eames sought to develop furniture that could be mass-produced and affordable, with the exception of the Eames Lounge Chair. This luxury item was inspired by the traditional English club chair. The Eames Lounge Chair is an icon of Modern style design, although when it was first made, Ray Eames remarked in a letter to Charles that the chair looked "comfortable and un-designy". Charles's vision was for a chair with "the warm, receptive look of a well-used first baseman's mitt." The chair is composed of three curved plywood shells covered with veneer: the headrest, the backrest and the seat. The layers are glued together and shaped under heat and pressure. The shells and the seat cushions are essentially of the same shape, and composed of two curved forms interlocking to form a solid mass. The chair back and headrest are identical in proportion, as are the seat and the ottoman. The products have changed in various ways over time. Beginning in 1956 and running through the very early 1990s, the shells were made up of five thin layers of plywood which were covered by a veneer of Brazilian rosewood. The use of Brazilian rosewood was discontinued in the early 1990s, and current production since then consists of seven layers of plywood covered by finishing veneers of cherry, walnut, palisander rosewood (a sustainably grown wood with similar grain patterns to the original Brazilian versions), and other finishes. Small changes include the sets of spacers between the aluminum spines and the wood panels, originally of rubber, later hard plastic washers, and the number of screws securing the armrests, originally three, changed to two in second-series models, while the "domes of silence" (glides/feet) on the chair base originally had thinner screws attaching them to the aluminum base than those on later chairs, and the zipper around the cushions, either brown or black on early models, was later black only. Further, early ottomans had removable rubber slide-on feet with metal glides, and early labels are of oblong foil. History The Eames Lounge Chair first...

An extremely rare Charles Eames "Design of the Century" advertising poster By Herman Miller USA, circa 1999 Measures: 25.13"W x 0.75"D x 37.13"H. Excellent condition.

This is an original Eames Lounge Chair and Ottoman, models 670 and 671, designed by Charles and Ray Eames for Herman Miller in 1956. This set dates to ca. 1958. The shells on this se...

Uncommonly seen 1940s dining / entry table designed by Gilbert Rohde for Herman Miller. The table has a beautiful marquetry design inlaid into the top and is accompanied by one leaf....

Ray and Charles Eames’ iconic folding screen, FSW-10, for Herman Miller takes the inspiration for its undulating shape from the folds of heavy drapery. Composed of articulated panels...

This is a Steel Frame No 4000 Series Dresser, initially designed by George Nelson for Herman Miller in 1954. Its model number is 4013. It features a frame of white powder-coated bent...

This is an ES-108 Three-Seat Teak Sofa, initially designed by Ray and Charles Eames for Herman Miller in 1984. This example dates to the 1990s. Its design consists of a solid aluminu...

This is a Noguchi Coffee Table, Model IN-50, initially designed by Isamu Noguchi in 1944. This example hails from the 1950s and was produced by Herman Miller. The design features a t...

This is a Steelframe No. 4000 Series Cabinet, initially designed by George Nelson for Herman Miller in 1950. Its model number is 4033. It features a frame of white powder-coated bent...

Charles Eames for Herman Miller Mid Century upholstered shell office chair This chair measures: 25 wide x 22 deep x 32 high, with...

Early, original George Nelson teak wood thin-edge Jewelry chest model number 5211 for Herman Miller. Signed inside top drawer with original silver Herman Miller Medallion. The case m...

c. 1980s. Original green upholstery. We have eight available

A unique combination of flexibility and strength that meets the demands of work spaces that have become more collaborative, while the dematerialised lumbar support bends and flexes w...

These are Eames Aluminum Group Soft Pad Management Desk Chairs, Model EA435, designed by Charles and Ray Eames for Herman Miller in 1969. These examples date to the 2010s. The listed...

George Nelson rosewood Thin Edge chest or dresser for Herman Miller, U.S.A. Exceptional rosewood grain patterns throughout just ...

This is an LCW Lounge Chair, originally designed by Charles and Ray Eames in 1948. It is an early Herman Miller example featuring the 5-2-4 screw pattern, dating it to ca. 1953. The ...

Mid Century Modern DSS stacking dining side chairs designed by Ray and Charles Eames for Herman Miller circa 1960s. These collectible molded fiberglass shell seats are available in g...

Designed in the late 1940s by Charles Eames, this chair has cemented itself in Mid-Century Design like very few other pieces. Early models like this are difficult to come by and are very rarely in such good condition, as many have been worked on in some way or another before their value shot up. These chairs feature a super sleek design of steam-bent plywood, an incredibly innovative technique pioneered by Herman Miller in collaboration with the Eames's and manufacturing firm Evans. The large seat and back are mounted to a molded plywood base with rubber shock mounts, another Eames staple. This allows them to have excellent contrast through spacing, which gives them an excellent stance, almost insect-like. Both are early chairs with the 5-2-5 screw configurations beneath. This pair features all original hardware, finish, and shock mounts. Very few blemishes, and those that exist are minimal, barely visible even in our high-res pictures. At this time, we have two early pairs, as seen in in photos. We also have another single early model, and two extremely rare pre-production chairs with the accompanying molded plywood coffee table...

Designed by George Nelson as model 4620 for Herman Miller's Basic Cabinet Series, this pair of walnut dressers sits on ebonized wood legs. Each...

Ray and Charles Eames’ iconic folding screen, FSW-6, for Herman Miller takes the inspiration for its undulating shape from the folds of heavy drapery. Composed of articulated panels ...