Furniture

George Nelson Herman Miller Thin Profile Cabinet. Uncommon little cabinet that does not take up much space. Please request additional photos and condition report. Appears that the ...

We are delighted to offer extremely rare and important pair of fully restored, original, Herman Miller No1 & Herman Miller Hillie circa 1958-1960 black leather and Rosewood lounge armchairs and ottomans These are pretty much the most iconic and well known armchair and ottoman ever made, exhibited countless times, displayed in the V&A, Metropolitan Museum of Art, winners of countless awards these are the simply put the finest suite around They have been on a journey, I’ve had all pieces stripped to the bare shells, the frames have been washed back and traditionally French polished, the leather all restored and hand dyed the original nero black, they are the finest example pair anywhere in the world today One suite has the black Herman Miller No1 label, the other, the earlier redish Herman Miller Hillie label Condition wise, the restoration has been done in such a way to keep all the original charm and patina but make them gallery ready, they will have age and use related patina marks here and there but mostly they are in very fine order Dimensions armchairs Height:- 80.5cm Width:- 85cm Depth:- 86.5cm Seat height:- 41cm Dimensions ottomans Height:- 42cm Width:- 65.5cm Depth:- 53.5cm Please note all measurements are taken at the widest point, MUST READ! The Eames Lounge Chair and ottoman are furnishings made of molded plywood and leather, designed by Charles and Ray Eames for the Herman Miller furniture company. They are officially titled Eames Lounge ( 670 ) and Ottoman ( 671 ) and were released in 1956 after years of development by designers. It was the first chair that the Eameses designed for a high-end market. Examples of these furnishings are part of the permanent collection of New York's Museum of Modern Art. Design Charles and Ray Eames sought to develop furniture that could be mass-produced and affordable, with the exception of the Eames Lounge Chair. This luxury item was inspired by the traditional English club chair. The Eames Lounge Chair is an icon of Modern style design, although when it was first made, Ray Eames remarked in a letter to Charles that the chair looked "comfortable and un-designy". Charles's vision was for a chair with "the warm, receptive look of a well-used first baseman's mitt." The chair is composed of three curved plywood shells covered with veneer: the headrest, the backrest and the seat. The layers are glued together and shaped under heat and pressure. The shells and the seat cushions are essentially of the same shape, and composed of two curved forms interlocking to form a solid mass. The chair back and headrest are identical in proportion, as are the seat and the ottoman. The products have changed in various ways over time. Beginning in 1956 and running through the very early 1990s, the shells were made up of five thin layers of plywood which were covered by a veneer of Brazilian rosewood. The use of Brazilian rosewood was discontinued in the early 1990s, and current production since then consists of seven layers of plywood covered by finishing veneers of cherry, walnut, palisander rosewood (a sustainably grown wood with similar grain patterns to the original Brazilian versions), and other finishes. Small changes include the sets of spacers between the aluminum spines and the wood panels, originally of rubber, later hard plastic washers, and the number of screws securing the armrests, originally three, changed to two in second-series models, while the "domes of silence" (glides/feet) on the chair base originally had thinner screws attaching them to the aluminum base than those on later chairs, and the zipper around the cushions, either brown or black on early models, was later black only. Further, early ottomans had removable rubber slide-on feet with metal glides, and early labels are of oblong foil. History The Eames Lounge Chair first...

This is an Eames Aluminum Group Soft Pad Executive Desk Chair, Model EA437, initially designed by Charles and Ray Eames for Herman Miller in 1969. These are newer examples, dating to...

This is an original Eames Lounge Chair and Ottoman, models 670 and 671, designed by Charles and Ray Eames for Herman Miller in 1956. This set dates to 1962. The shells on this set ar...

Early Eames Aluminum Group Marble 36" Round Coffee Table. Stone sits on a metal support system that was only used briefly, or possibly pre-production. Table is in very nice shape w...

This is a ‘DAR’ Armchair, originally designed by Charles and Ray Eames in 1950. This particular chair was produced by Herman Miller in 2016. The listed price includes one DAR cha...

This fantastic sofa, designed by George Nelson, is an iconic piece of Mid-Century Modern design. Manufactured by Herman Miller in the USA around 1960. The sofa has a two-seater seat...

1960s Staff Leuchten glass and brass pendants. Executed in brassed metal and thick opaline molded glass etched on the inside, with cu...

This is an original Eames Lounge Chair and Ottoman, models 670 and 671, designed by Charles and Ray Eames in 1956. This set dates to circa 1990 and has Brazilian rosewood shells. The...

This is an Eames Aluminum Group Management Desk Chair, model EA335, initially designed by Ray and Charles Eames for Herman Miller in 1958. These examples date to 2012. The listed pri...

Brian Kane's Swoop Collection for Herman Miller embodies a modern interpretation of midcentury style, particularly showcased through the Swoop Plywood Lounge Chair. Kane meticulously...

This iconic circular white 5452 pedestal coffee or side table was designed by George Nelson and made by Herman Miller, USA 1960s. It features a White laminate top and enameled steel...

Mid-Century Lounge Chair and Ottoman by Charles & Ray Eames for Herman Miller for ICF

Environmental Enrichment Panel by Alexander Girard for Herman Miller "GEOMETRY" Re-relesed in 2000s,, This panel has been dis-continued,, No longer being produced,, Great original condition. Hand delivery avail to New York City or anywhere en route from Buffalo NY Girard Environmental Enrichment...

This is a Steel Frame No 4000 Series Dresser, initially designed by George Nelson for Herman Miller in 1954. Its model number is 4013. It features a frame of white powder-coated bent...

Gorgeous set of 4 Herman Miller Eames dining chairs. Vintage fiberglass shells are stamped Herman Miller and guaranteed authentic. Surfaces has been custom recoated in vibrant colors...

Rare Herman Miller Geiger International Pair of Easy Chairs . Camden Series. Perfect reception or side chairs. Beautiful velvety striped fabric. Very comfortable, sturdy, and ready...

1 Herman Miller Eames 42" aluminum group table. Charles Eames was born in St. Louis, Missouri in 1907. Ray Kaiser Eames was born in Sacramento, California ...

This is an ES-108 Three-Seat Teak Sofa, initially designed by Ray and Charles Eames for Herman Miller in 1984. This example dates to the 1990s. Its design consists of a solid aluminu...

The set includes 5x the 20cm high lamp and 4x the 12cm. Design from Rolf Krüger 1966, winner of the German IF Award in 1967! Rod luminaires are particularly suitable for creati...

Gorgeous early Eames for Herman Miller fiberglass chair LAX (Low Armchair on X Base) having large shock mounts and flat edge shell. All origina...

Pedestal desk designed in 1955 by George Nelson for Herman Miller, USA. Teak wood top with two drawers underneath and polished aluminium bases.

This is an original Eames Lounge Chair and Ottoman, models 670 and 671, designed by Charles and Ray Eames for Herman Miller in 1956. This set dates to ca. 1958. The shells on this se...

A fabulous Charles & Ray Eames transitional armchair produced by Herman Miller with Zenith Plastics. The salmon colored LAX chair features a rope edge, X base, large shock mounts, bo...

Early ‘RAR’ Rocking Chair, initially designed by Ray and Charles Eames in 1950. This particular chair dates to around 1960s, as determined by the Herman Miller Embossed logo. The des...

This is a Steelframe No. 4000 Series Cabinet, initially designed by George Nelson for Herman Miller in 1950. Its model number is 4033. It features a frame of white powder-coated bent...

Uncommonly seen 1940s dining / entry table designed by Gilbert Rohde for Herman Miller. The table has a beautiful marquetry design inlaid into the top and is accompanied by one leaf....

Classic Herman Miller Eames DCM dining chair. Ebonized molded wood seat and back, supported by chrome steel rod frame. All screws and self leve...

This is a Noguchi Coffee Table, Model IN-50, initially designed by Isamu Noguchi in 1944. This example hails from the 1950s and was produced by Herman Miller. The design features a t...

Extremely impressive Sputnik chandelier from the 1970s. Extraordinary design and a real eye-catcher for every room. The lighting effect of the lamp is extremely beautiful. Very high ...

Soft Pad Chair by Eames for Herman Miller Length- 22 3/4 Depth- 23 Height at it's lowest- 32 Height at it's tallest- 34 Seat Height at its lowest- 20 Arm Height at its lowest- 25 Fo...

1x Eames soft pad office chair model EA435 produced by Herman Miller. The chair/s features a polished aluminium frame and a very soft navy blue leather. The chair was made in the e...

Herman Miller Aeron side/guest or desk chair size (B) by Herman Miller. It's the best and most admired and recognized ergonomic office chair ever made. Its innovative design and supp...

These are Eames Aluminum Group Soft Pad Management Desk Chairs, Model EA435, designed by Charles and Ray Eames for Herman Miller in 1969. These examples date to the 2010s. The listed...

Charles Eames (1907-1978) & Ray Eames (1912-1988) for Zenith Plastics / HermanMiller DAR Eiffel rope-edge chair Venice, California / Zeeland, Michigan, 1950 fiberglass, enameled steel early sticker label Measures: 24 7/8" W x 23 5/8" D x 31 3/8" H All original parts, including rare first gen. feet, which date the piece to the first batch of production (1950). Labelled. Gorgeous museum worthy piece. Quite possibly one of the most famous and iconic chairs ever, the Eames DAR would most commonly become known as the ‘eiffel chair’ due to its sculptured wire base resembling that of Europe’s most notorious landmark. The very first generation of the Eames DAR Eiffel Chair was recognizable not only for the ‘rope edge’ shell but also due to the protruding ‘1st gen’ feet as opposed to boot glides or later plastic feet. The abbreviated Eames DAR Chair stands for the Eames Dining (D) height, Arm (A) Chair, on Rod (R) Base released in the first year of arm chair production of the fiberglass series developed to the marketplace in 1950. The early success of the Eames arm chairs, released in 1950, was a co-ordinated effort between the Eames . Office (Designers), Zenith Plastics (Manufacturers) and Herman Miller (Distributors). The chair series was always designed to have interchangeable bases and the DAR was one of the ‘original 5’ alongside the DAX X-base, LAR cats cradle...

This is an LCW Lounge Chair, originally designed by Charles and Ray Eames in 1948. It is an early Herman Miller example featuring the 5-2-4 screw pattern, dating it to ca. 1953. The ...

Vintage Eames Herman Miller MCM Aluminum Group 4 Prong Contract Base White Laminate Top Table Handsome vintage Eames for Herman Miller mid-century modern Aluminum Group 4 prong chro...

These are Eames Time Life Executive Desk Chairs, model 3474 , initially designed in 1961 by Charles and Ray Eames for Herman Miller. The listing price includes one executive chair, a...

An Eames LCM lounge chair, Herman Miller, USA, 1950s. Ash plywood, chrome-plated steel and original rubber feet caps. With manufacturers label. ...

Charles Eames for Herman Miller Mid Century upholstered shell office chair This chair measures: 25 wide x 22 deep x 32 high, with...

Early George Nelson Action Office 1 desk in original condition with minor wear. George Nelson for Herman Miller, polished aluminum, plastic laminate, w...

Superb vintage modular sofa entirely restored and reupholstered with a fabric by Dédar. Designed by Don Chadwick for Herman Miller. 4 parts.

This is a very rare, early 'RAR' Rocking Chair, initially designed by Ray and Charles Eames in 1950. This particular chair dates to around 1951, as determined by the early Zenith lab...

Tandem Base and Table without shells. Show signs of use. 35 cm H incl the height of the bar of the base/ 40 incl the top of the seat support/ 42 cm incl the top of the table top su...

Designed in the late 1940s by Charles Eames, this chair has cemented itself in Mid-Century Design like very few other pieces. Early models like this are difficult to come by and are very rarely in such good condition, as many have been worked on in some way or another before their value shot up. These chairs feature a super sleek design of steam-bent plywood, an incredibly innovative technique pioneered by Herman Miller in collaboration with the Eames's and manufacturing firm Evans. The large seat and back are mounted to a molded plywood base with rubber shock mounts, another Eames staple. This allows them to have excellent contrast through spacing, which gives them an excellent stance, almost insect-like. Both are early chairs with the 5-2-5 screw configurations beneath. This pair features all original hardware, finish, and shock mounts. Very few blemishes, and those that exist are minimal, barely visible even in our high-res pictures. At this time, we have two early pairs, as seen in in photos. We also have another single early model, and two extremely rare pre-production chairs with the accompanying molded plywood coffee table...

This authentic Eames for Herman Miller Aluminum Group Lounge Chair originally designed in 1958 as part of the Aluminum Group Collection was manufactured in 2005. The unique aluminum ...

This is an Eames Aluminum Group lounge chair, model EA316, originally designed by Charles and Ray Eames for Herman Miller in 1958. These particular examples date to the years 2012 an...

George Nelson for Herman Miller Steel Frame Occasional Table on Wheels (1955) Frame: Black or white enamel with minor chips and scratches (consistent with age/use) Surfaces: Oiled wa...

Mid Century Modern DSS stacking dining side chairs designed by Ray and Charles Eames for Herman Miller circa 1960s. These collectible molded fiberglass shell seats are available in g...

A piece of the Eames should not be missing at home or office, and this is a good piece as for a desk as for a dining room, the top is in a good condition as well as the aluminum, it ...

Early Charles Eames Dining Set, This set consists of Four DCW Dining Chairs in Birchwood and Rare DCW-1 Walnut Dining Table. Tables measures; 29¼ h × 54 w × 34 d in Chairs measures: ...

These are Eames Aluminum Group Soft Pad Executive Chairs, Model EA420, designed by Charles and Ray Eames for Herman Miller in 1969. These examples date to circa 1975. The listed pric...

This striking DAX rope edge fiberglass Zenith shell chair, designed by Charles and Ray Eames for Herman Miller Co., dates back to the 1960s. Featuring a fiberglass shell with origina...

These authentic Eames for Herman Miller Soft Pad Executive Height office chairs from the Aluminum Group Collection were manufactured in 2001. These executive height chairs feature a ...

Introduced in 1946, the slat platform bench was one of Nelson's first designs for Herman Miller after becoming their design director. Intended to serve as a table, a seat, or a base for case goods, its countless imitations over the years are a testament to its functionality and popularity. Herman Miller produced them in a range of sizes to meet a variety of needs. This exceptional vintage example is model 4693. At 102” in length, it’s the largest size slat bench Herman Miller...

These are Eames Aluminum Group Management Desk Chairs, model EA335, originally designed by Charles and Ray Eames for Herman Miller in 1958. These particular examples date to 2013. Th...

A very rare modular walnut coffee table, Model 4651, designed by George Nelson and produced by Herman Miller in 1946.

Very nice early production Charles and Ray Eames designed dining chair metal (DCM ). Clean chrome frame supports ash grain seat and back. Retains original Eames Evans Herman Miller w...