Furniture

This is an Eames Aluminum Group Management Desk Chair, model EA335, initially designed by Ray and Charles Eames for Herman Miller in 1958. These examples date to 2012. The listed pri...

We are delighted to offer extremely rare and important pair of fully restored, original, Herman Miller No1 & Herman Miller Hillie circa 1958-1960 black leather and Rosewood lounge armchairs and ottomans These are pretty much the most iconic and well known armchair and ottoman ever made, exhibited countless times, displayed in the V&A, Metropolitan Museum of Art, winners of countless awards these are the simply put the finest suite around They have been on a journey, I’ve had all pieces stripped to the bare shells, the frames have been washed back and traditionally French polished, the leather all restored and hand dyed the original nero black, they are the finest example pair anywhere in the world today One suite has the black Herman Miller No1 label, the other, the earlier redish Herman Miller Hillie label Condition wise, the restoration has been done in such a way to keep all the original charm and patina but make them gallery ready, they will have age and use related patina marks here and there but mostly they are in very fine order Dimensions armchairs Height:- 80.5cm Width:- 85cm Depth:- 86.5cm Seat height:- 41cm Dimensions ottomans Height:- 42cm Width:- 65.5cm Depth:- 53.5cm Please note all measurements are taken at the widest point, MUST READ! The Eames Lounge Chair and ottoman are furnishings made of molded plywood and leather, designed by Charles and Ray Eames for the Herman Miller furniture company. They are officially titled Eames Lounge ( 670 ) and Ottoman ( 671 ) and were released in 1956 after years of development by designers. It was the first chair that the Eameses designed for a high-end market. Examples of these furnishings are part of the permanent collection of New York's Museum of Modern Art. Design Charles and Ray Eames sought to develop furniture that could be mass-produced and affordable, with the exception of the Eames Lounge Chair. This luxury item was inspired by the traditional English club chair. The Eames Lounge Chair is an icon of Modern style design, although when it was first made, Ray Eames remarked in a letter to Charles that the chair looked "comfortable and un-designy". Charles's vision was for a chair with "the warm, receptive look of a well-used first baseman's mitt." The chair is composed of three curved plywood shells covered with veneer: the headrest, the backrest and the seat. The layers are glued together and shaped under heat and pressure. The shells and the seat cushions are essentially of the same shape, and composed of two curved forms interlocking to form a solid mass. The chair back and headrest are identical in proportion, as are the seat and the ottoman. The products have changed in various ways over time. Beginning in 1956 and running through the very early 1990s, the shells were made up of five thin layers of plywood which were covered by a veneer of Brazilian rosewood. The use of Brazilian rosewood was discontinued in the early 1990s, and current production since then consists of seven layers of plywood covered by finishing veneers of cherry, walnut, palisander rosewood (a sustainably grown wood with similar grain patterns to the original Brazilian versions), and other finishes. Small changes include the sets of spacers between the aluminum spines and the wood panels, originally of rubber, later hard plastic washers, and the number of screws securing the armrests, originally three, changed to two in second-series models, while the "domes of silence" (glides/feet) on the chair base originally had thinner screws attaching them to the aluminum base than those on later chairs, and the zipper around the cushions, either brown or black on early models, was later black only. Further, early ottomans had removable rubber slide-on feet with metal glides, and early labels are of oblong foil. History The Eames Lounge Chair first...

This is an original Eames Lounge Chair and Ottoman, models 670 and 671, designed by Charles and Ray Eames for Herman Miller in 1956. This set dates to ca. 1958. The shells on this se...

An extremely rare Charles Eames "Design of the Century" advertising poster By Herman Miller USA, circa 1999 Measures: 25.13"W x 0.75"D x 37.13"H. Excellent condition.

Uncommonly seen 1940s dining / entry table designed by Gilbert Rohde for Herman Miller. The table has a beautiful marquetry design inlaid into the top and is accompanied by one leaf....

Ray and Charles Eames’ iconic folding screen, FSW-10, for Herman Miller takes the inspiration for its undulating shape from the folds of heavy drapery. Composed of articulated panels...

This is a Steel Frame No 4000 Series Dresser, initially designed by George Nelson for Herman Miller in 1954. Its model number is 4013. It features a frame of white powder-coated bent...

A wooden pendant lamp by Hans-Agne Jakobsson made in the 1960s. The body of the lamp is wood. The lamp has a beautiful Scandinavian design. Measurements: Height: 47-100 cm Diame...

This is an ES-108 Three-Seat Teak Sofa, initially designed by Ray and Charles Eames for Herman Miller in 1984. This example dates to the 1990s. Its design consists of a solid aluminu...

This is a Noguchi Coffee Table, Model IN-50, initially designed by Isamu Noguchi in 1944. This example hails from the 1950s and was produced by Herman Miller. The design features a t...

A beautiful set of 4 chrome wall lamps model V-299 designed by Hans-Agne Jakobsson and manufactured by his own company in Markaryd Sweden in the 1950s. The lamps feature a full chrom...

Raffia Bast Floor Lamp by Hans-Agne Jakobsson for Markaryd, 1960s, Sweden Lamp is in very good vintage condition with leather details This lamp works with E27 light bulb. Max 100W W...

c. 1980s. Original green upholstery. We have eight available

This is a Steelframe No. 4000 Series Cabinet, initially designed by George Nelson for Herman Miller in 1950. Its model number is 4033. It features a frame of white powder-coated bent...

Charles Eames for Herman Miller Mid Century upholstered shell office chair This chair measures: 25 wide x 22 deep x 32 high, with...

Early, original George Nelson teak wood thin-edge Jewelry chest model number 5211 for Herman Miller. Signed inside top drawer with original silver Herman Miller Medallion. The case m...

A unique combination of flexibility and strength that meets the demands of work spaces that have become more collaborative, while the dematerialised lumbar support bends and flexes w...

These are Eames Aluminum Group Soft Pad Management Desk Chairs, Model EA435, designed by Charles and Ray Eames for Herman Miller in 1969. These examples date to the 2010s. The listed...

George Nelson rosewood Thin Edge chest or dresser for Herman Miller, U.S.A. Exceptional rosewood grain patterns throughout just ...

This is an LCW Lounge Chair, originally designed by Charles and Ray Eames in 1948. It is an early Herman Miller example featuring the 5-2-4 screw pattern, dating it to ca. 1953. The ...

Mid Century Modern DSS stacking dining side chairs designed by Ray and Charles Eames for Herman Miller circa 1960s. These collectible molded fiberglass shell seats are available in g...

Designed in the late 1940s by Charles Eames, this chair has cemented itself in Mid-Century Design like very few other pieces. Early models like this are difficult to come by and are very rarely in such good condition, as many have been worked on in some way or another before their value shot up. These chairs feature a super sleek design of steam-bent plywood, an incredibly innovative technique pioneered by Herman Miller in collaboration with the Eames's and manufacturing firm Evans. The large seat and back are mounted to a molded plywood base with rubber shock mounts, another Eames staple. This allows them to have excellent contrast through spacing, which gives them an excellent stance, almost insect-like. Both are early chairs with the 5-2-5 screw configurations beneath. This pair features all original hardware, finish, and shock mounts. Very few blemishes, and those that exist are minimal, barely visible even in our high-res pictures. At this time, we have two early pairs, as seen in in photos. We also have another single early model, and two extremely rare pre-production chairs with the accompanying molded plywood coffee table...

Designed by George Nelson as model 4620 for Herman Miller's Basic Cabinet Series, this pair of walnut dressers sits on ebonized wood legs. Each...

Ray and Charles Eames’ iconic folding screen, FSW-6, for Herman Miller takes the inspiration for its undulating shape from the folds of heavy drapery. Composed of articulated panels ...

Early Charles Eames Dining Set, This set consists of Four DCW Dining Chairs in Birchwood and Rare DCW-1 Walnut Dining Table. Tables measures; 29¼ h × 54 w × 34 d in Chairs measures: ...

These are Eames Time Life Executive Desk Chairs, model 3474 , initially designed in 1961 by Charles and Ray Eames for Herman Miller. The listing price includes one executive chair, a...

This authentic Eames for Herman Miller Aluminum Group Lounge Chair originally designed in 1958 as part of the Aluminum Group Collection was manufactured in 2005. The unique aluminum ...

George Nelson Thin Edge nightstands for Herman Miller. Iconic design for Nelson's Thin Edge series produced by Herman Miller, Michigan U.S....

Pair of Scandinavian wall sconces by the famous Swedish designer Hans Agne Jakobsson. Model "Tratten" designed in 1954 and edited by ...

Awesome example of the Charles and Ray Eames DAX fiberglass arm shell chair for Herman Miller. It is in elephant hide gray with a black H base and unusual glide feet. It retains a pa...

This authentic Eames for Herman Miller Thin Pad Executive Height office chair from the Aluminum Group Collection was manufactured in 2015. This executive height chair features a tall...

Authentic rare Mid-Century Modern early RAR rocking chair designed by Charles and Ray Eames for Herman Miller. This gorgeous mid-century rocking chair was produced between 1956 -1959...

Very nice early production Charles and Ray Eames designed dining chair metal (DCM ). Clean chrome frame supports ash grain seat and back. Retains original Eames Evans Herman Miller w...

An exceptional mid-century modern five-drawer dresser chest By George Nelson for Herman Miller, "Basic Cabinet ...

These are Eames Aluminum Group Management Chairs, originally designed by Charles and Ray Eames for Herman Miller in 1958. These particular examples were produced in 2009. Their desig...

This beautiful midcentury Scandinavian / Swedish chrome pendant was designed by Hans-Agne Jakobsson for Markaryd in the 1960s. The lamp has got a cable which you can adjust in heigh...

Tandem Base and Table without shells. Show signs of use. 35 cm H incl the height of the bar of the base/ 40 incl the top of the seat support/ 42 cm incl the top of the table top su...

Orignal production iconic Marshmallow Sofa designed by Irving Harper for the George Nelson Office therefore attributed to George Nelson. Manufactured by Herman Miller and signed who...

The Cosm stool sophisticated ergonomic design instantly responds to your body, movements, and posture to provide natural balance and total support. The revolutionary seat combines Au...

Early George Nelson Action Office 1 desk in original condition with minor wear. George Nelson for Herman Miller, polished aluminum, plastic laminate, w...

A very rare modular walnut coffee table, Model 4651, designed by George Nelson and produced by Herman Miller in 1946.

"LA FONDA" BLACK SLATE AND CHROME COFFEE TABLE Designed by Charles and Ray Eames for Herman Miller unlabeled Item # 204IJG23P A table originally designed by Charles and Ray Eames ...

Pedestal side table designed in 1954 by George Nelson for Herman Miller, USA. Veneered wood top with polished aluminum base. See our other matching large table with white laminate top.

An extremely rare and exceptional pair of Mid-Century Modern bookcase cabinets Designed by Gilbert Rohde for Herman Miller "Paldao Group" USA, 1940s Exotic book-matched pald...

These are Eames Aluminum Group Soft Pad Executive Chairs, Model EA420, designed by Charles and Ray Eames for Herman Miller in 1969. These examples date to circa 1975. The listed pric...

These are Eames Aluminum Group Executive high back desk chairs, designed by Charles and Ray Eames and produced by Herman Miller. This model was originally designed in 1958, and these...

The first fiberglass Eames chairs were produced by Zenith Plastics. The early Zenith shells are distinctive for their high fiber content and larger, more substantial rubber shock mou...

Classic Herman Miller fiberglass diamond chair. Designed by Charles and Ray Eames. circa 1970s production. Model DSX. This shade is called “Brilliant Yellow” and is one of the less c...

George Nelson designed this uniquely functional side table, model 4745, for Herman Miller. Constructed of walnut with ebonized block legs, it houses two square copper planting boxes...

The Eames Soft Pad Lounge Chair was a marriage of two pillar designs in the Eames catalogue. One one side, you had the commercial-oriented Aluminum Group Series and then you had the ...

Gorgeous set of 4 Herman Miller Eames dining chairs. Vintage fiberglass shells are stamped Herman Miller and guaranteed authentic. Surfaces has been custom recoated in vibrant colors...

This is an Eames Aluminum Group Soft Pad Lounge Chair, model EA216, originally designed by Ray and Charles Eames in 1968. This particular example was produced by Herman Miller in the...

Walnut 3 drawer dresser with the classic cupcake pulls. This Dresser is part of the Basic Cabinet Series (BCS) designed by George Nelson for Herman Miller.

Set of six stacking DSS chairs, designed by Eames, for Herman Miller, having beige/ clay colored tweed upholstery, dark gray fiberglass shells, and metal legs. All are in very good...

Swedish wall light model V-155 designed by Hans-Agne Jakobsson, produced in Markaryd, Sweden, 1960s. The wall light has a beautiful patina.

Herman Miller Aeron side/guest or desk chair size (B) by Herman Miller. It's the best and most admired and recognized ergonomic office chair ever made. Its innovative design and supp...

Super rare! George Nelson for Herman Miller steel frame chairs, model 5080 Easy Lounge Chairs. Original painted frames with solid wood arms. Orig...

This early George Nelson design features two extensions with reversible and removable tray tables. Closed, it is a modestly scaled table. Opened the surface nearly doubles, and the t...