Skip to main content

Eames Molded Plywood Lounge Chair Metal Base Lcm

Eames Molded Plywood Lounge Chair Metal Base (LCM), Circa 1950s
By Charles and Ray Eames
Located in Centreville, VA
The Eames LCM (Lounge Chair Metal) features sheets of premium face veneer on both sides of the seat
Category

Vintage 1940s American Mid-Century Modern Lounge Chairs

Materials

Plywood

Eames Lcm Chair (2Nd Generation)
Located in Brooklyn, NY
. Crafted with molded plywood and a metal base, the LCM chair showcases the Eameses’ skill in working with
Category

Vintage 1950s Lounge Chairs

Materials

Metal

Eames Lcm Chair (2Nd Generation)
Eames Lcm Chair (2Nd Generation)
H 26.5 in W 22.5 in D 24.25 in
Early LCW Lounge Chair in Birch by Charles & Ray Eames, Herman Miller, 1950s
By Charles and Ray Eames, Herman Miller, Charles Eames
Located in Vorst, BE
Wood (W) Base. The all plywood chair was finally released in 1946, designed by Charles Eames and
Category

Mid-20th Century American Mid-Century Modern Lounge Chairs

Materials

Plywood, Birch

Set of Two '2' Herman Miller LCW Lounge Chairs by Charles & Ray Eames, USA
By Charles and Ray Eames, Herman Miller
Located in Deland, FL
LCW Chair was the Lounge Height (L) Side Chair (C) on Wood (W) Base. Designed by Charles Eames and
Category

1990s American Mid-Century Modern Lounge Chairs

Materials

Walnut

Early LCW Lounge Chair stained red by Charles & Ray Eames, Evans Plywood, 1950s
By Charles Eames, Charles and Ray Eames, Evans Products Company
Located in Vorst, BE
LCW (Lounge Chair Wood) chair created by Charles and Ray Eames around 1945. Chair sold by Herman
Category

Mid-20th Century American Mid-Century Modern Dining Room Chairs

Materials

Plywood

People Also Browsed

Charles & Ray Eames for Herman Miller Plywood DCW Dining Chairs, 1950s Set of 2
By Charles and Ray Eames, Herman Miller
Located in London, GB
The DCW chair was originally released in 1946, with Herman Miller taking over the manufacture of the chairs in 1950. This lasted until 1953 when the chairs were taken out of producti...
Category

Vintage 1950s American Mid-Century Modern Dining Room Chairs

Materials

Plywood

Black LCW by Charles Eames 1955
By Charles Eames
Located in Dallas, TX
Early Production LCW designed by Charles Eames manufactured by Herman Miller - 1955. Chair is in very good original condition with the original black analine dye.
Category

Mid-20th Century American Mid-Century Modern Chairs

Materials

Rubber, Plywood

Black LCW by Charles Eames 1955
Black LCW by Charles Eames 1955
H 27 in W 22 in D 23 in
Evans Herman Miller LCW by Charles Eames
By Charles Eames
Located in St.Petersburg, FL
An excellent example of Charles Eames Herman Miller/Evans 1940's LCW (lounge chair wood). All original with original shock mounts, screws and label intact.
Category

Vintage 1940s American Mid-Century Modern Chairs

Materials

Maple

A Pair of Charles Eames LCW's Early Original Examples Evans
By Charles and Ray Eames
Located in St.Petersburg, FL
A rare pair of early production (5x2x5 screw mounts) Charles Eames LCW (lounge chair wood). Original analine black finish in very good condition. Back shockmounts replaced. Priced to...
Category

Vintage 1940s American Side Chairs

Materials

Ash

Early Set of Four Harry Bertoia Molded Shell Side Chairs for Knoll, Labeled
By Harry Bertoia, Knoll
Located in Chesterfield, NJ
Set of four molded shell side chairs designed by Harry Bertoia and manufactured by Knoll. Originally debuted in 1960, this very early set is from 1963 and includes four colors - beig...
Category

Vintage 1960s American Mid-Century Modern Side Chairs

Materials

Metal

Mid Century Lounge Chair and Ottoman by Murphy Miller for Plycraft c 1950’s
By Plycraft, Murphy Miller Inc.
Located in New York, NY
Classic Mid Century lounge chair and ottoman designed by Murphy Miller for Plycraft, circa 1950’s. The swivel and tilt chair features bent plywood arms which are attached to the tuft...
Category

Mid-20th Century American Mid-Century Modern Lounge Chairs

Materials

Metal

Collector's Early Eames DCM Chair
By Charles and Ray Eames
Located in Los Angeles, CA
Collector's early Eames DCM chair.
Category

Vintage 1950s American Slipper Chairs

Materials

Bentwood

Collector's Early Eames DCM Chair
Collector's Early Eames DCM Chair
H 29.5 in W 19.5 in D 22 in
Early Eames LCW with Evans Label
By Charles and Ray Eames, Herman Miller
Located in Oklahoma City, OK
An early iconic design. The LCW designed by Charles and Ray Eames manufactured by Evans for Herman Miller. This piece is being sold in found condition with original Evans labeling. F...
Category

Vintage 1940s American Mid-Century Modern Lounge Chairs

Materials

Wood

Early Eames LCW with Evans Label
Early Eames LCW with Evans Label
H 26.5 in W 22 in D 23 in
DCM Chair by Charles and Ray Eames for Herman Miller
By Charles and Ray Eames, Herman Miller
Located in Los Angeles, CA
DCM chair (Dining metal chair) by Charles and Ray Eames for Herman Miller. Designed in 1946, this molded plywood + chromed steel chair is a Classic design. Sometimes referred to as ...
Category

Vintage 1950s American Mid-Century Modern Dining Room Chairs

Materials

Plywood

Charles and Ray Eames DCW for Herman Miller
By Charles and Ray Eames
Located in Belmont, MA
DCW by Charles and Ray Eames for Herman Miller in original condition. Legs attached with 5/2/4 screw configuration. Original patina.
Category

Vintage 1960s American Mid-Century Modern Chairs

Materials

Plywood

Charles and Ray Eames DCW for Herman Miller
Charles and Ray Eames DCW for Herman Miller
H 28.75 in W 19.3 in D 20.87 in
Early Eames Walnut DCW for Herman Miller / Evans 'B'
By Charles and Ray Eames
Located in Cincinnati, OH
A early Eames DCW side chair in finely grained bent walnut ply from the iconic team of Ray and Charles Eames. Built after WW2 using techniques developed during war production and swi...
Category

Mid-20th Century American Mid-Century Modern Chairs

Materials

Walnut

Charles Eames Wire Chairs with Bikini Cover on Eiffel Base's
By Herman Miller, Charles Eames
Located in Buffalo, NY
Classic pair Eames wire chairs on a black Eiffel base with the bikini covers for Herman Miller, Naugahyde bikini tops missing elastic connectors, nice early pair.
Category

Vintage 1950s American Mid-Century Modern Side Chairs

Materials

Steel

Early Eames DCM Birch Plywood Dining Chairs
By Charles and Ray Eames, Herman Miller
Located in Brooklyn, NY
Nice set of early 1950s DCM chairs, designed by Charles and Ray Eames for Herman Miller. These are well-preserved second generation examples in a fetching birch and black combinatio...
Category

Vintage 1950s American Mid-Century Modern Dining Room Chairs

Materials

Metal

Herman Miller Eames LCW Red Aniline Dye
By Charles and Ray Eames
Located in New York, NY
Extremely rare and fantastic example of Red Aniline Dye LCW from the Evans era of production. Notice the 525 screw pattern. This is the earliest example of the LCW with original ...
Category

Vintage 1940s American Mid-Century Modern Lounge Chairs

Materials

Plywood

Eames DCM Dining Chair by Herman Miller
By Herman Miller, Charles and Ray Eames
Located in Brooklyn, NY
Classic Eames DCM dining chair in black. Colored ash seat and back along with chrome frame. Self leveling nylon glides intact, allowing for use on multiple surfaces. Signed and guara...
Category

20th Century American Mid-Century Modern Dining Room Chairs

Materials

Wood

Eames DCM Dining Chair by Herman Miller
Eames DCM Dining Chair by Herman Miller
H 30.25 in W 20 in D 21 in
1954 Herman Miller Eames LCM Walnut Lounge Chair with Metal Legs
By Charles and Ray Eames, Herman Miller
Located in Philadelphia, PA
Listed for sale is a circa 1954 production Herman Miller LCM (Lounge Chair with Metal Legs), designed by Ray and Charles Eames. This was one of the earliest designs by the Eames,' af...
Category

Vintage 1950s American Modern Lounge Chairs

Materials

Metal

Recent Sales

Eames Molded Plywood Lounge Chair for Herman Miller with Metal Base
By Charles and Ray Eames
Located in San Antonio, TX
While their cousin, the DCM, sits upright, Eames molded plywood lounge chairs with metal bases (LCM
Category

Vintage 1950s American Mid-Century Modern Chairs

Materials

Metal

Charles and Ray Eames for Herman Miller 1950s LCM Chair
By Charles and Ray Eames, Herman Miller
Located in San Francisco, CA
A all original LCM (“Lounge Chair with Metal base”) chair in birch by Charles and Ray Eames for
Category

Vintage 1950s American Mid-Century Modern Lounge Chairs

Materials

Steel

Early LCM Chair in Rare Aniline Red by Charles Eames for Herman Miller
By Herman Miller, Charles Eames
Located in Berlin, DE
Molded plywood lounge chair with metal base in original condition. The LCM chair is a classic
Category

Vintage 1950s American Mid-Century Modern Lounge Chairs

Materials

Metal

Vitra LCW Lounge Chair by Charles & Ray Eames
By Vitra, Charles and Ray Eames
Located in AMSTERDAM, NL
in the year 2015. LCW stands for Lounge Chair on Wooden base. The all-plywood chair was first
Category

Vintage 1950s German Mid-Century Modern Lounge Chairs

Materials

Ash, Plywood

Vitra LCW Lounge Chair by Charles & Ray Eames
Vitra LCW Lounge Chair by Charles & Ray Eames
H 26.78 in W 24.02 in D 22.05 in
Iconic Charles and Ray Eames LCM Lounge Chair
Located in Atlanta, GA
Iconic LCM Lounge Chair, designed by Charles and Ray Eames for Herman Miller, circa 1950's. This is
Category

Vintage 1950s American Side Chairs

Materials

Rubber

Charles Eames LCW Midcentury Lounge Chair in Maple for Herman Miller
By Charles Eames, Herman Miller
Located in Belmont, MA
series, the abbreviated Eames LCW Chair was the Lounge Height (L) side chair (C) on Wood (W) Base
Category

Mid-20th Century American Mid-Century Modern Chairs

Materials

Maple

Early LCW Lounge Chair in Ash by Charles & Ray Eames, Herman Miller, 1950s
By Charles Eames, Charles and Ray Eames, Herman Miller
Located in Vorst, BE
LCW (Lounge Chair Wood) chair created by Charles and Ray Eames around 1945. Chair sold by Herman
Category

Mid-20th Century American Mid-Century Modern Dining Room Chairs

Materials

Plywood

Set of Five 'DCM' Dining Chairs by Charles Eames for Herman Miller, Signed
By Ray Eames, Herman Miller, Charles Eames, Charles and Ray Eames
Located in Los Angeles, CA
introduced to the world in 1946 at an exclusive MoMa exhibit, the "Eames Molded Plywood Chair" collection
Category

2010s American Mid-Century Modern Dining Room Chairs

Materials

Metal

Charles and Ray Eames Red Beech DCM Chair, Herman Miller, Dining, Side Chair
By Herman Miller, Charles and Ray Eames
Located in Brooklyn, NY
plywood dining chair metal base (DCM) Measures: Height (in) 30.25 Width (in) 20 Depth (in) 21 Weight (lbs
Category

Mid-20th Century American Mid-Century Modern Dining Room Chairs

Materials

Stainless Steel

Set of Rare Red Aniline Herman Miller DCM Chairs by Evans circa 1950-1960
By Charles and Ray Eames, Herman Miller
Located in San Francisco, CA
MoMa exhibit, the "Eames Molded Plywood Chair" collection which included the LCW (Low or Lounge Chair
Category

Mid-20th Century Mid-Century Modern Chairs

Materials

Metal

Set of Rare Red Aniline Herman Miller DCM Chairs, possibly Evans circa 1950-1960
By Charles and Ray Eames, Herman Miller
Located in San Francisco, CA
, the "Eames Molded Plywood Chair" collection which included the LCW (Low or Lounge Chair Wood), LCM
Category

Mid-20th Century Mid-Century Modern Chairs

Materials

Metal

Eames Ctw Coffee Table in Beech for Herman Miller, circa 1950
By Herman Miller, Charles and Ray Eames
Located in San Diego, CA
) with a Wood (W) base. The Eames CTW Coffee Table consisted of a circular five-layer plywood top, sat
Category

Vintage 1950s American Mid-Century Modern Coffee and Cocktail Tables

Materials

Beech

1st Generation Evans Production Charles and Ray Eames LCM Chairs, 1946, Signed
By Charles Eames, Charles and Ray Eames, Evans Products Company
Located in Los Angeles, CA
Lounge Chair Metal, also synonymous with Low Chair Metal, are part of the plywood collection released in
Category

Vintage 1940s American Mid-Century Modern Lounge Chairs

Materials

Metal

Early Ray and Charles Eames for Herman Miller DCM Chairs, circa 1950s
By Charles and Ray Eames, Herman Miller
Located in San Francisco, CA
Molded Plywood Chair" collection which included the LCW (Low or Lounge Chair Wood), LCM (Low Chair Metal
Category

Mid-20th Century Mid-Century Modern Chairs

Materials

Metal

1950s Early Production 'DCM' Chairs by Charles Eames for Herman Miller, Signed
By Herman Miller, Ray Eames, Charles Eames, Charles and Ray Eames
Located in Los Angeles, CA
exclusive MoMa exhibit, the "Eames Molded Plywood Chair" collection which included the LCW (Low or Lounge
Category

Vintage 1960s American Mid-Century Modern Dining Room Chairs

Materials

Metal

Pair of Charles and Ray Eames Red Beech DCM Chair, Herman Miller
By Charles and Ray Eames, Herman Miller
Located in Brooklyn, NY
plywood dining chair metal base (DCM) Measures: Height (in) 30.25 Width (in) 20 Depth (in) 21 Weight (lbs
Category

Mid-20th Century American Mid-Century Modern Dining Room Chairs

Materials

Stainless Steel

Get Updated with New Arrivals
Save "Eames Molded Plywood Lounge Chair Metal Base Lcm", and we’ll notify you when there are new listings in this category.

Charles and Ray Eames for sale on 1stDibs

Charles Eames and Ray Eames were the embodiment of the inventiveness, energy and optimism at the heart of mid-century modern American design, and have been recognized as the most influential designers of the 20th century.

As furniture designers, filmmakers, artists, textile and graphic designers and even toy and puzzle makers, the Eameses were a visionary and effective force for the notion that design should be an agent of positive change. They are the happy, ever-curious, ever-adventurous faces of modernism.

Charles (1907–78) studied architecture and industrial design. Ray (née Beatrice Alexandra Kaiser, 1912–88) was an artist, who studied under the Abstract Expressionist painter Hans Hofmann. They met in 1940 at the Cranbrook Academy of Art in suburban Detroit (the legendary institution where Charles also met his frequent collaborator Eero Saarinen and the artist and designer Harry Bertoia) and married the next year.

His technical skills and her artistic flair were wonderfully complementary. They moved to Los Angeles in 1941, where Charles worked on set design for MGM. In the evenings at their apartment, they experimented with molded plywood using a handmade heat-and-pressurization device they called the “Kazam!” machine. The next year, they won a contract from the U.S. Navy for lightweight plywood leg splints for wounded servicemen — they are coveted collectibles today; more so those that Ray used to make sculptures.

The Navy contract allowed Charles to open a professional studio, and the attention-grabbing plywood furniture the firm produced prompted George Nelson, the director of design of the furniture-maker Herman Miller Inc., to enlist Charles and (by association, if not by contract) Ray in 1946. Some of the first Eames items to emerge from Herman Miller are now classics: the LCW, or Lounge Chair Wood, and the DCM, or Dining Chair Metal, supported by tubular steel.

The Eameses eagerly embraced new technology and materials, and one of their peculiar talents was to imbue their supremely modern design with references to folk traditions. Their Wire chair group of the 1950s, for example, was inspired by basket weaving techniques. The populist notion of “good design for all” drove their molded fiberglass chair series that same decade, and also produced the organic-form, ever-delightful La Chaise. In 1956 the Eames lounge chair and ottoman appeared — the supremely comfortable plywood-base-and-leather-upholstery creation that will likely live in homes as long as there are people with good taste and sense.

Charles Eames once said, “The role of the designer is that of a very good, thoughtful host anticipating the needs of his guests.” For very good collectors and thoughtful interior designers, a piece of design by the Eameses, the closer produced to original conception the better, is almost de rigueur — for its beauty and comfort, and not least as a tribute to the creative legacy and enduring influence of Charles and Ray Eames.

The collection of original Eames furniture on 1stDibs includes chairs, tables, case pieces and other items.

A Close Look at mid-century-modern Furniture

Organically shaped, clean-lined and elegantly simple are three terms that well describe vintage mid-century modern furniture. The style, which emerged primarily in the years following World War II, is characterized by pieces that were conceived and made in an energetic, optimistic spirit by creators who believed that good design was an essential part of good living.

ORIGINS OF MID-CENTURY MODERN FURNITURE DESIGN

CHARACTERISTICS OF MID-CENTURY MODERN FURNITURE DESIGN

MID-CENTURY MODERN FURNITURE DESIGNERS TO KNOW

ICONIC MID-CENTURY MODERN FURNITURE DESIGNS

VINTAGE MID-CENTURY MODERN FURNITURE ON 1STDIBS

The mid-century modern era saw leagues of postwar American architects and designers animated by new ideas and new technology. The lean, functionalist International-style architecture of Le Corbusier and Bauhaus eminences Ludwig Mies van der Rohe and Walter Gropius had been promoted in the United States during the 1930s by Philip Johnson and others. New building techniques, such as “post-and-beam” construction, allowed the International-style schemes to be realized on a small scale in open-plan houses with long walls of glass.

Materials developed for wartime use became available for domestic goods and were incorporated into mid-century modern furniture designs. Charles and Ray Eames and Eero Saarinen, who had experimented extensively with molded plywood, eagerly embraced fiberglass for pieces such as the La Chaise and the Womb chair, respectively. 

Architect, writer and designer George Nelson created with his team shades for the Bubble lamp using a new translucent polymer skin and, as design director at Herman Miller, recruited the Eameses, Alexander Girard and others for projects at the legendary Michigan furniture manufacturer

Harry Bertoia and Isamu Noguchi devised chairs and tables built of wire mesh and wire struts. Materials were repurposed too: The Danish-born designer Jens Risom created a line of chairs using surplus parachute straps for webbed seats and backrests.

The Risom lounge chair was among the first pieces of furniture commissioned and produced by legendary manufacturer Knoll, a chief influencer in the rise of modern design in the United States, thanks to the work of Florence Knoll, the pioneering architect and designer who made the firm a leader in its field. The seating that Knoll created for office spaces — as well as pieces designed by Florence initially for commercial clients — soon became desirable for the home.

As the demand for casual, uncluttered furnishings grew, more mid-century furniture designers caught the spirit.

Classically oriented creators such as Edward Wormley, house designer for Dunbar Inc., offered such pieces as the sinuous Listen to Me chaise; the British expatriate T.H. Robsjohn-Gibbings switched gears, creating items such as the tiered, biomorphic Mesa table. There were Young Turks such as Paul McCobb, who designed holistic groups of sleek, blond wood furniture, and Milo Baughman, who espoused a West Coast aesthetic in minimalist teak dining tables and lushly upholstered chairs and sofas with angular steel frames.

As the collection of vintage mid-century modern chairs, dressers, coffee tables and other furniture for the living room, dining room, bedroom and elsewhere on 1stDibs demonstrates, this period saw one of the most delightful and dramatic flowerings of creativity in design history.

Finding the Right seating for You

With entire areas of our homes reserved for “sitting rooms,” the value of quality antique and vintage seating cannot be overstated.

Fortunately, the design of side chairs, armchairs and other lounge furniture — since what were, quite literally, the early perches of our ancestors — has evolved considerably.

Among the earliest standard seating furniture were stools. Egyptian stools, for example, designed for one person with no seat back, were x-shaped and typically folded to be tucked away. These rudimentary chairs informed the design of Greek and Roman stools, all of which were a long way from Sori Yanagi's Butterfly stool or Alvar Aalto's Stool 60. In the 18th century and earlier, seats with backs and armrests were largely reserved for high nobility.

The seating of today is more inclusive but the style and placement of chairs can still make a statement. Antique desk chairs and armchairs designed in the style of Louis XV, which eventually included painted furniture and were often made of rare woods, feature prominently curved legs as well as Chinese themes and varied ornaments. Much like the thrones of fairy tales and the regency, elegant lounges crafted in the Louis XV style convey wealth and prestige. In the kitchen, the dining chair placed at the head of the table is typically reserved for the head of the household or a revered guest.

Of course, with luxurious vintage or antique furnishings, every chair can seem like the best seat in the house. Whether your preference is stretching out on a plush sofa, such as the Serpentine, designed by Vladimir Kagan, or cozying up in a vintage wingback chair, there is likely to be a comfy classic or contemporary gem for you on 1stDibs.

With respect to the latest obsessions in design, cane seating has been cropping up everywhere, from sleek armchairs to lounge chairs, while bouclé fabric, a staple of modern furniture design, can be seen in mid-century modern, Scandinavian modern and Hollywood Regency furniture styles.

Admirers of the sophisticated craftsmanship and dark woods frequently associated with mid-century modern seating can find timeless furnishings in our expansive collection of lounge chairs, dining chairs and other items — whether they’re vintage editions or alluring official reproductions of iconic designs from the likes of Hans Wegner or from Charles and Ray Eames. Shop our inventory of Egg chairs, designed in 1958 by Arne Jacobsen, the Florence Knoll lounge chair and more.

No matter your style, the collection of unique chairs, sofas and other seating on 1stDibs is surely worthy of a standing ovation.

Questions About Charles and Ray Eames
  • 1stDibs ExpertApril 5, 2022
    Charles and Ray Eames have been recognized as the 20th century’s most influential designers and are best known for their highly recognizable chairs. The Eames lounge chair and ottoman are an iconic duo in modern-styled furniture, and s​ome of the first Eames items to emerge from Herman Miller are now classics: the LCW, or Lounge Chair Wood, and the DCM, or Dining Chair Metal, supported by tubular steel. Find vintage Charles and Ray Eames furniture on 1stDibs.